Overland Vehicle Systems 26019910 User manual

Pop-up
Changing Room
assembly instrucons
PLEASE READ THIS INSTRUCTION BEFORE ASSEMBLY

POP-UP CHANGING ROOM
SET-UP & CARE INSTRUCTIONS
ASSEMBLY
1.Lay Changing room at on oor with center
poinng upward
2.Pull hub together

POP-UP CHANGING ROOM
SET-UP & CARE INSTRUCTIONS
Unlocked Locked
** Please make sure that the hub is locked before
proceeding further. Push down to lock
3 .Tie loop under hub
4.Expand telescoping legs and clip fabric to tent
PRESS HERE PULL UP

POP-UP CHANGING ROOM
SET-UP & CARE INSTRUCTIONS
5.Stake out and use guylines to secure tent
TAKE DOWN
1. Remove stakes and guylines. Unclip tent
fabric and loosen telescoping legs
PRESS HERE
PULL
DOWN

POP-UP CHANGING ROOM
SET-UP & CARE INSTRUCTIONS
2. Unfasten loop under hub
3. Lay fabric corners inward to the center pole

POP-UP CHANGING ROOM
SET-UP & CARE INSTRUCTIONS
For any further quesons, please contact
Overland Vehicle Systems at 833.226.4863 or visit
www.overlandvehiclesystems.com
1. Fold all corners inward
2. Lay fabric at
3. Fold fabric over
1. 2. 3.