Oway WM-WB3200 User manual

1
UserGuide for WM-WB3200
Chapter1BriefIntroduction
1:Whatistheinteractivewhiteboardsystem?
InteractiveWhiteboardsystemisapositioning systembasedonthelatestinfrared
technology.Usethissystemyoucanoperateprojectorandcomputereasierand
achievemoreexcellentpresentationeffects.
Having Interactivewhiteboardsystemmeansyounotonlyhavestrongerfunctions
thanmouse,touchscreenandelectronicwhiteboard,moreimportantyouhavethe
moreMan-machinecommunicationopportunitiesinthepresentation:Use interactive
whiteboard”youcanalmostneglecttheprojector,computersystem., theoperationfit
thenaturalcommunicationcustom.Useinteractivewhiteboardsystemwillovercome
thedefectsoftheSpeakers’sjustsitbeforethecomputerwhichlacksofinteractive
communications.
2:Systemrequirements
1hardwarerequirements
·CPU ：basedonX86 processor,abovepentium166
·Memory：64 MB RAM(recommend 128 MB RAM)
·Hardware: free space
2softwarerequirements
98/2000/XP/2003/vista/win7 operating system
3naturalenvironment
Shouldavoidthesunshineorotherstrongprojectivitylight,especiallyyoushouldn’t
makeadirectprojectiontoscreen;youcan’tblockthelightpathfromthepentipto
thesignalreceiver.Generally,youshould’tblockthelightoftheprojector.
3:Productcomponentlist
Pleasecheckifthepackageissamewiththeschedulelistofitems,iflackof
componentsorcomponentsaredamaged,pleasecontactlocaldistributorsorour
company.
1Signalreceiver
2Interactivewritingpen
310mUSBline
4WallMountSteelSupport
5Pointer(Optional)
6Disk

2
Chapter2ProductComponentsIntroduction
1Signalreceiver
Signalreceiverisadevicewhichcanreceivethesignalfromtheindicating
device(interactivewritingpen pointer) andidentifythelocationofindicatingdevice,
andtransmitthelocationandoperatinginformationtocomputer.
○
1
○
2
○
3 ○
4
○
5

3
○
1Signalreceiving area:Thisisthefrontreceiving area ofthesignalreceiver,where
thesignalisreceivedbyinteractivewritingpenorpointer
○
2Laser:Thisisthelaserwhichcanbeusedtodeterminethescopeofavailable
screen,it’sredwhenitworks.
○
3Signalindicatorlight：This is the signalindicator light, it’sgreenwhen
it works
○
4Power indicator light：This is the powerindicator light, it’sred
when it works.
○
5USB interface: This is the USB interface, attention: This is
square-mouth.
○
6Laser switch: This is touch switch
○
6

4
2Interactivewritingpen
Replace themousetowriteandoperateonthescreen
○
1Pentip:ThereisasignalindicatorLED,itwill emitlightsignalwhensignalis
output
○
2Microswitch:whenthepentipisgivensmallpressure,signalindicatorlightwill
emitlightsignal, thatismicroswitchison, thepencanwrite
○
3Thebackcoverofthepenbody：unscrewthebackcoverandputthebatteriesinto
thepenbody,itcanbeused
○
4Pencap：Afteruseit,coverthecaptoavoidthrowingontheground
3Connection Line
USBline:Usedtoconnectthereceiverandcomputerafterfixing thesignalreceiver.
4Wall MountSteelSupport
Pleaserrefertoinstruction.
○
1
○
2
○
3
○
4

5
5Pointer
5.1Pointerbody
Itisusedtoconnectthetelescopicpointer, mostoftheoperationachievesbythepress
buttononthebodyofthepointer.
○
1“L”key：Press andreleasethe L”keyonce equalsclicktheleftkeyofthemouse
inthepentip,longpressthe L”keyequalsclicktherightkeyofthemousein
thepentip.
○
2Backcoverofthepenbody:unscrewthebackcover,putthebatteriesandthenit
canbeused.
○
3Interface：It’sthreadedinterface usedtoconnectthetelescopicpointer
Howtousetheponter:
Interactive
writingpenoperation
Operatingmethods Mousefunction
once L”keyclick Press and release
L”key once
Click the left key of
the mouse
twice L”key click
Continuous press and
release the" L "key
twice (interval not too
long)
C
lick the left keyof
the mouse twice
longpress L”key Press the L”keyforat
least2seconds
Clicktherightkeyofthe
mouseonce
drag Press L”key,movetheTheoperationofthedrag
○
1
○
2 ○ 3

6
interactivewritingpen
whichcanachievedraging
oftheleftandrightkeyof
themouse
5.2Telescopicrod
The connecting use of the Telescopicrodandpointerbodyisgoodforoperatingon
thescreen.
①Signal indicator light
②Rod body: retractable；
③Rod knob: correctlyinsert the rodinto the body of thepointer, rotate
it to fix the teaching rod
6Softwareinstallation
（1）Insertthedisk,doubleclickthesmartpointerinstall.exeprogram,popup the
interface below
○
1
○
2
○
3

7
Click 【Next】toenter SelectDestinationDirectory”,selectingthelink,whereyou
canchooseinstallationdirectory, see below:

8
Choosethefileinstalltationlocation, thenclick 【Next】
Click【Next】tostarttheinstallation:

9
Confirminstallationinformation, clicknexttostarttheinstallationprocess
Youcansee successfulinstallationinterface afterfinishing theinstallation
Clickfinish, endinstallationprocess.

10
Chapter3HowtouseWM-WB3200system
1WM-WB3200 installationmethod ,systemrequirementsand
notes
Suspendedceiling installationismainlyusedforfixedlong-termuse,the
advantageofwhichisthatonce installationanddebug isfinished,ifnotmovethe
projector,wedon’tneedtoadjustthereceiver’slocationandelevation,andwedon’t
needtoconductcoordinatesampling againinthelateruse.
2Startsettings
2.1 Startsettings
Properlyconnectedandturnonyourcomputerandprojector, adjusttheprojectorto
thewallorprojectorscreenonthescreenshowsnormal. Afterinstallationiscomplete,
noneedtorestartyourcomputer, intheWINDOWSthe[Start]menuoftheprogram
directory, selectthegenerated 【SmartPointer】directory 【SmartPointer】optionor
double-clicktheshortcuticon onthedesktop, specificdemonstration
operationisshownbelow:
2.2 Interactivewhiteboardsystemsettings
Usetheleftkeyofthemousetoclickthesmallicon in the system taskbar
of the right corner of the desktop, the menu will pop up, as follows: