
Unit Button
Press the Unit Button to switch between measuring
in ounces, ounces and pounds, grams, or grams and
kilograms.
Weight Capacity Indicator
The Weight Capacity Indicator shows the used
capacity of the Scale between 0 and 11 lbs (or 0
and 5 kg). When maximum capacity is reached, all
bars in the indicator will flash and “Err” will appear
on the display. To protect Scale, remove excess
weight immediately.
Low Battery Indicator
The Low Battery Indicator will appear in the lower-left
corner when batteries need to be changed.
Standby Mode
After 5 minutes of inactivity, the display will switch to Standby Mode and the memory will be retained.
Touch any button or place weight on Scale after 5 minutes to return the Scale to active mode.
Auto Shut Off
After 45 minutes of inactivity, the Scale will shut off and memory will be lost. To turn the Scale on
again, press the power button .
Manual Shut Off
To turn Scale off manually, press and hold the Power Button until display is blank or return display
to underside of Scale.
Pull-Out Display
Display unit can be pulled away from base unit for better visibility when a large container is placed on
the platform. Simply pull on the front tab and position display unit in front of base unit. To retract,
reposition display unit in base and magnets will secure it in place.
For best results, place item on center of glass surface.
Pull-Out Display
Pull the display unit away from the Scale to use.
Scale will automatically turn on when display is
pulled out.
Backlight
Backlight will turn on when any button is pressed
or any weight is placed on the scale. To preserve
battery life, the backlight will automatically turn
off after 30 seconds.
Power/Zero Button
Press the Zero Button to reset the Scale before adding
additional ingredients or to offset the weight of a
plate or bowl. Hold button down for 3 seconds to
shut Scale off, or return display to underside of Scale.
FEATURES USE
CARE
Battery Loading (Four AAA Batteries Included)
Locate battery compartment on the bottom of the Scale. Push tab in to remove battery door.
Ensure +/
_
ends of batteries line up with +/
_
symbols in battery compartment. Replace battery door.
Cleaning
Wipe glass platform clean with a damp cloth. Do not run Scale under water, do not put in dishwasher.
Storage
Do not place heavy objects on top of the Scale during storage. Doing so may affect the accuracy
of the Scale.
Low Battery
Indicator
Weight
Convertor Button
Weight Capacity
Indicator
Power/Zero
Button