OYPLA DIY 4698 User manual

User Manual
USER MANUAL Model No: 4698
Tyre Stand

Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
•This product is not a toy, and is only to be used for its designated purpose.
•Never carry out any alterations or modifications to this product.
•Make sure to load the platforms evenly, ensuring that the weight is balanced.
•Leaving the product outside and exposed to weather, especially direct sunlight,
rain and salt air, will speed the weathering process. This can be slowed by
removing the product from these conditions, or covering the product with a
suitable cover.
•Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
•Only use this product on stable, level and dry ground.
•If the product is damaged or has any defects, please contact [e-mail]
USER MANUAL Model No: 4698

1. Attach the four metal feet to the stand using the bolts provided.
2. Attach the poles to the stand using the pins provided.
3. Apply the tyre holders to the steel tube, using the pins to secure them.
USER MANUAL Model No: 4698

Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 4698