OYPLA DIY 3965 User manual

Page 1
Manual Version: v1.0
Model Code: 3965
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3965
Contents
1Front Cover
-
2Safety
Instructions
-
2Operating
Instructions
-
3Back Cover
End
Heavy Duty Sack
Truck –80kg Capacity

Page 2
Manual Version: v1.0
Model Code: 3965
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2Operating
Instructions
-
3Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•This product is not a toy, and is only to
be used for its designated purpose.
•Never carry out any alterations or
modifications to this product.
•Do not exceed the 80kg load capacity.
Doing so can cause personal injury
and/or product damage.
•Make sure to load the platform evenly,
ensuring that the weight is balanced.
•Leaving the product outside and exposed
to weather, especially direct sunlight,
rain and salt air, will speed the
weathering process. This can be slowed
by removing the product from these
conditions, or by covering the product
with a suitable cover.
•Do not push the truck over rough or
uneven ground, or up and down curbs.
Use ramps where available.
•Do not transport loads that will impair
your frontal vision, ensuring that the
height of the load doesn’t exceed the
height of the handle.
•When transporting wide loads, ensure
that there is a large enough space for the
load to proceed.
•When transporting heavy loads, make
sure that the heaviest part of the load is
directly connected to the platform of the
truck and touching the frame.
•If the product is damaged or has any
defects, please contact
[email protected]
Operating Instructions
Please refer to the images on the following page for instructions on how to operate
your product.
How to Operate:
Hold the sack truck by the handle and pull the platform out until the platform
is flat.
Place the load onto the sack truck, ensuring the heaviest part of the load is
directly on the platform and the load is leaning against the frame. The
platform is 39cm wide. Please do not place items wider than the platform on
the sack truck.

Page 3
Manual Version: v1.0
Model Code: 3965
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
2Operating
Instructions
-
3Back Cover
End
For small loads, the handle
should be in its default
position.
For large loads the handle
should be extended to its final
position.
For medium loads, the handle
should be extended to its
secondary position.
To store the sack truck, push the
platform up against the frame
and push the handle down into
it’s default state.