Oypla GARDEN 4584 User manual

User Manual
USER MANUAL Model No: 4584
Hose Hanger
*Colours May Vary

This product is not a toy, and is only to be used for its designated purpose.
Never carry out any alterations or modifications to this product.
Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
If the product is damaged or has any defects, please contact cs[email protected]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
Note - This product is best suited for hoses that are 55m in length.
USER MANUAL Model No: 4584

USER MANUAL Model No:
USER MANUAL Model No: 3935
USER MANUAL Model No: 4584
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
Assembly Instructions
Notice: Please check you have all parts required before attempting assembly
1x Hose Hanger 2x Screws 2x Wall Plugs
Use the holes in the hose hanger to plan where you would like to assemble the
hanger. Using a pencil, lightly mark the wall matching up to the two holes on the
hanger.
Proceed to drill two holes matching the pencil marks you have created during step
1. Ensure to use a drill bit that matches the size of the screws and wall plugs.
Once holes have been created, insert wall plugs to ensure the wall has protection
from the metal screws, before inserting screws, enough for the hose hanger to
comfortably hang on.
Hang the hanger onto the screws.