OYPLA Home 4000 User manual

Single Canvas Wardrobe
User Manual
USER MANUAL Model No: 4000

This product is not a toy and should only be used for its designated purpose.
Make sure that the frame secure before applying any weight to the product.
This product is intended for indoor use only.
Do not carry out alterations or modifications to this product.
Do not discard any of the packaging until you have checked that you have all the
parts and fittings required.
When placing shoes in the wardrobe, ensure that there are no sharp edges or rough
edges that will cause the canvas platforms to become torn and broken.
Overloading the wardrobe can result in product failure or damage.
Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
If the product is damaged or has any defects, please contact [email protected]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 4000

Item No./Description
Quantity
Picture
A
4
B
8
C
4
Long Pole (1)
10
Short Pole (2)
14
Support pole (3)
1
Shelf (4)
2
Cover (5)
1
Parts List:
If you are missing any of the below parts please contact [email protected]om
Please be aware that you will be referring to this parts list throughout the assembly process.
Assembly Instructions
USER MANUAL Model No: 4000

USER MANUAL Model No: 4000
1) Slide two Long poles (1) through the Shelf (4),
then repeat on the other shelf. Next take 2 short
poles (2) and attach 4 (Bs) as shown in the
photos. Lastly, take another 2 short poles (2) and
attach all 4 (As) in the same way as before.
2
B
1
4
A
2
2) Now, attach both shelves (4) to the 4 short
poles (2) from step 1 as can be seen in the
picture to the right. Ensure each corner can have
more poles attached to it in later steps which is
also shown in the picture.
3) Join 4 short poles (2) to 4 long poles (1) using
4 (Cs) as shown in the picture. Then, attach these
to the shelves (4) made in step 2. The (A) shelf
should be at the bottom with its longest side
acting as the legs. See picture.
4
4
4
4
4
A
2
1
C
2
B&A
1
1
2
B&A
2
1
2

4) Attach 4 more short poles (2) to the
remaining 4 (Bs) and then attach to the
top of the built shelving unit as shown.
5) Next, secure the final 2 short poles (2) and
final 2 long poles (1) to the frame.
Additionally, add the support pole (3) across
the middle lengthways at the top of the frame.
6) The final step, is to now place the cover (5) over
the assembled frame.
USER MANUAL Model No: 4000
4
4
4
2
B
B
1
2
1
3
2
5
5
1
2