Oypla Leisure 4052 User manual

USER MANUAL Model No: 4052
Wall Mounted Bike Rack
User Manual

Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 4052USER MANUAL Model No: 4052
•This product is not a toy and should only be use as its designated purpose.
•Never carry out any alterations or modifications to this product.
•This product is intended for indoor use only.
•Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
•Ensure the product is mounted correctly before use.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances.
•Never exceed the maximum load capacity of 100kg, or it may result in product failure
or personal injury.
•This product is designed to hold a maximum of 3 bikes.
•Keep fingers, loose clothing, and hair away when folding the product.
•If the product is damaged or has any defects, please contact [email protected]

Part
Qty
Bike Rack
1
Wall Anchor
4
Screw
4
USER MANUAL Model No: 4052
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
Assembly Instructions
Parts List:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the below parts, please contact Oypla customer services:
[email protected]om
1. Hold the bike rack in the position you wish to mount it onto your wall and mark the correct
places to drill the holes into the wall. Ensure that the rack will be mounted level before
drilling any holes.
2. Drill the mounting holes and insert the wall anchors.
3. Screw the rack tightly and securely to the wall. Always ensure that the fittings are secure
before using the rack.