Oypla 3932 User manual

User Manual
3m Aluminium Folding
Decorating Table
USER MANUAL Model No: 3932

Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
Do not discard any of the packaging until you have checked that you have all of
the parts and fittings required.
This product is not a toy, and is to be used for its designated purpose.
Do not carry out alterations of modifications to this product.
Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
Only use this product on stable, level and dry ground.
Don’t overload the product.
Make sure you distribute weight across the product evenly.
Keep fingers, loose clothing and hair away whilst folding the product.
Make sure that the legs lock into position.
If this product is damaged or has any defects, please contact [e-mail].
USER MANUAL Model No: 3932
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 3932
PLEASE DO NOT EXCEED THE 30KG LOAD CAPACITY.

USER MANUAL Model No:
Please retain a copy of all instructions for future
USER MANUAL Model No: 3935
USER MANUAL Model No: 3932
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
Step 1:
Unclip the handle from the side of the product.
Step 2:
Fold and extend each side of the table.
Step 3:
Fold and extend each side of the table.
Once all sides of the table have been extended, unfold the legs
from the underside of the table.
Step 4:
When unfolding the legs, the horizontal bar which extends with
the legs should be clipped into the clips on the underside of the
table, secure these fully.
Step 5:
Please repeat this for the last leg, ensuring all fittings are securely in place. Check this
over before using the product.
Assembly Instructions