How to detect the GPS tracker? ( GPS Detector )
How to detect the wireless signals?
( Wireless Signals Detector )
Wireless Signals detect
While the knob switch is ON, wireless Signals detect is auto ON.(The knob switch
is also for adjusting wireless detector's sensitivity)
Turn the knob switch to maximum value
Then move back till wireless detector indicator
only shows one led blinking and move it close
to suspicious objects or directions. If there are
working wireless devices shows above,the
indicator,speaker and vibration will work at the
same time according to its signal strength of
wireless devices.
Wi-Fi: 2.4G
Plug the GPS detector into main device.
Press MODE switch while device in wireless detector mode.
Then GPS detector function is ON. (GPS has no sensitivity
adjust, just according to the strength of magnetism).
Turn on the side knob switch, whole device’s battery is on;
One press the lens nder switch to start,
look through the view nder and slowly scan
the room’ suspected area to look for any cameras;
( Press the lens nder switch to change the speed
ashing LEDs. )
The lens of the hidden cameras will appear
as a bright red point of blinking light when you
illuminate it with the light beam;
3
4Long press lens nder switch 3 seconds to turn off the
lens detector.
How to detect the hidden cameras? ( Lens Detector )
1 x RF bug detector 1 x User manual 1 x USB cable
1 x GPS magnetic signal scanning 1 x Test lens
In the box:
(included pinhole lens to test)
2 3
