OzSpy DRFDCD06 User manual

Key Ring Phone and Camera Bug Detector
DRFDCD06
This compact mobile phone and wireless camera detector uses state of the art technology
to detect the presence of active mobile phones (including stealth/ghost phones that may
show no visible signs of calls) as well as hidden wireless cameras (1.2Ghz and 2.4Ghz).

1
OzSpy Issued Manual
BACK FRONT
Note: On/Off Switch in red box
Using the Device
To start using, move the On/Off switch into the ‘On’position (marked as ‘1’on
the back of the device) and the LED will start to flash.
Aim the detector where you want to check for a hidden camera and or wireless
microphone in operation.
If the LED stays solid and no longer flashes, there is either:
oWiFi signal detected (2m maximum distance)
oCellular phone in use (5m maximum distance)
To stop using, move the On/Off switch into the ‘Off’position (marked as ‘0’on
the back of the device) and the LED will no longer flash.
If the LED light remains solid when turned on, the battery may need replacement

2
OzSpy Issued Manual
Battery Replacement
Take a ball point pen, or similar object, and use it to
carefully pry the housing apart.
Once the cover is removed, slide the old battery down,
away from the LED to Remove it from the unit.
Slide the new battery (CR2032 3V) under the holder
and ensure it is sitting all the way in.
Reattached the keyring loop and replace the cover