
NOTE! Max weight/load: 80 kg. Check that the meeting surfaces are clean, if necessary, place a towel
or similar between TROLLER and on the car.
7. Place the rear of the kayak in line with the intended position on the car roof and the front near to
the car’s rear wheel.
8. Place the front of the kayak on TROLLER.
9. Take a firm grip on the rear and slowly roll up the kayak up onto the roof rack. Please note that the
kayak is rolled in the same direction as the wheels.
10. Move it slowly into correct position.
UNLOADING:
11. Place TROLLER on the car, see fig. 4–6. Pull the kayak backwards. Tip: An extension strap attached
in e.g. the rear handle of the kayak can be of good help.
12. When the kayak reaches the wheels of TROLLER, grip firmly and slowly move the kayak towards the
ground.
13. Place the rear of the kayak on the ground, making sure it does not slide backwards. NOTE! Do not
pull too far as it may fall off!
13
12
11
10
9
8
7