P'kolino Nesto Bunk Bed User manual

Made in Brazil.
March 2020
20

Philips screw driver Hammer
Tools required
Made in Brazil.
March 2020
20
3
4
5
1 vertical
support rail
2 upper front,
guard rail
2 vertical rail
2 upper panels
1 top front
side rails
1 top back
side rails
Warnings Labels
2 slats
3 step
2 ladder side rail
2 upper back,
guard rail
2 bottom side rails
2 lower panels
1
2
You will need a Phillips head screw driver and a hammer
1 vertical rail

8 side rail bolts (B) 1 allen wrench (C)
20 wooden dowels (D)
76 bed slat screws (G)
4 adhesive felt (A)
for side rail bolts (B)
4 wooden dowels (E)
4 plastic support (F) 12 bolts for horizontal rail
and ladder side rail (H)
12 ladder hook screws (I) 4 metal hook for ladder (K)1 allen wrench (J) 4 adhesive felt (L)
for metal hook for ladder (K)

(A)
4 adhesive felt (A)
Insert 4 adhesive felts at the bottom of the feet.(A)
2 lower panels
4 wooden dowels (E)
Insert 4 wooden dowels into hole shown in diagram.(E)
2
(E)
Insert 4 plastic support (F) into hole shown in diagram.
34 plastic support (F)
5
Insert 4 wooden dowels (D) into hole shown in diagram.
4
Tool required
Hammer
6 wooden dowels (D)

Attach lower panels to side rails with 4 bolts (B) 1 Allen wrench (C).
lower panel
lower panel
1
2
(B)
(C)
(B)
(C)
Bottom Bed

3
4 wooden dowels (D)
Hammer
Tools required
4
Step 2 using 26 screws (G)
26 Bed slat
screws (G)
4 Wooden
dowels (D)
(D)
(D)
(D)
(D)
Philips screw driver
Tools required

Step 5
3
4
2 upper panels
4 bolts for
horizontal rail (H)
(J)
(H)
Attach upper panels to side rails with 4 bolts (B) 1 Allen wrench (C).
2 Attach upper panels to 2 upper back (guard rail) with 4 bolts for horizontal rail (H) using 1 Allen wrench (J).
(B)
(C)
2 upper back
(guard rail)
(B)
(C)
Top Bed

5
5
(J)
(H)
Step 6
1 Attach 2 vertical rail to with side rails with 12 vertical rail screws (G).
2 Attach to side rail with 2 vertical rail screws (G).1 vertical support rail
(G)
(G)
(G)
Step 7
3 Attach ) to upper panels with 2 bolts for horizontal rail (H) using 1 Allen wrench (J).2 upper front (guard rail
4 Attach ) to vertical support number rail to side rail with 4 vertical rail screws (G).2 upper front (guard rail
(G)
(G)
(G)
5 Attach 1 vertical rail to with front rails with 6 vertical rail screws (G).
2 upper front,
(guard rail)
Philips screw driver
Tool required
(G)
+ SPACE
BOTTOM
+ SPACE
BOTTOM
+ SPACE
BOTTOM
+ SPACE
BOTTOM
+ SPACE
BOTTOM
5
5
(G)

26 Bed slat
screws (G)
4 Wooden
dowels (D)
4 wooden dowels (D)
Step 8
Hammer
Tools required
Step 8 using 26 screws (G)
Step 9
(D)
(D)
(D)
Philips screw driver
Tools required
(D)

Step 10

Step 11
2 Attach 3 step to 2 ladder side rail with 6 vertical rail screws (H).
3 Attach 4 metal hook for ladder (K) with 12 ladder hook screws (I).
1 Insert 6 wooden dowels (D) into 3 step to ladder.
3 step
2 ladder side rail
(K)
(I)
(H)
(H)
(H)
(H)
6 vertical
rail screws (H)
(H)
adhesive felt (L)
for metal hook for ladder (K)
(K)
Philips screw driver
Tools required
(I)
(I)
(I)
(I)
(K)
(I)
(D)
(D)
(D)
(D)
(D)
(D)