P'kolino Playfully Smart Multiplo Side Table User manual

Multiplo Side Table
Made in Brazil.
June / 2023
2023
READ ALL INSTRUCTIONS BEFORE ASSEMBLING SIDE TABLE.

packaging are to
Side Table is intended for home use, not to be used in public institutions.
(hospitals, daycares, etc.)
Made in Brazil.
June / 2023
2023

You will need a Phillips head screwdriver
Multiplo Side Table - Table Parts:
Tools required
MANUFACTURER LABEL
DO NOT REMOVE !
1
1
1
1
2
2
2
2
3
3
4
4
4
4
5
5
1 h
Made in Brazil.
June / 2023
2023
Phillips screwdriver

20 - Bolts
3 1/8" (7 x 80mm) (A)
16 - Screws
9/16" (3,5 x 14mm) (B)
08 - Corner plate (C)
FOR MISSING PARTS OR HARDWARE:
DO NOT CONTACT THE STORE WHERE YOU MADE YOUR PURCHASE.DO NOT CONTACT THE STORE WHERE YOU MADE YOUR PURCHASE.
Please contact the manufacturer directly at [email protected] or 888-403-8992.
For customer service cases involving hardware please provide the part number.
Identify the size and type of hardware using the illustration below:
01 - Allen wrench (D)

Step 1
Step 2
Sides
Sides
Attach 2 parts and 1 part on to part 1 with 6 bolts , using 1 Allen wrench . Repeat this step 2 times.2 3 (A) (D)
Attach part on to parts and with 6 bolts , using 1 Allen wrench . Repeat this step 2 times.1 2 3 (A) (D)
Qty
06
A3 1/8" Bolt
DQty
01
Allen
wrench
2
2
3
1
D
A
D+A
D+A
D+A
Qty
06
A3 1/8" Bolt
DQty
01
Allen
wrench
D
A
1
2
2
3A+D
A+D
A+D
ATTENTION:
ALIGNMENT
ATTENTION

Step 4
Attach 2 parts 4 on to side with 2 bolts (A), using 1 Allen wrench (D).
Attach 2 parts 4 on side with 2 bolts (A), using 1 Allen wrench (D).
Step 3
Qty
02
A3 1/8" Bolt
DQty
01
Allen
wrench
Qty
02
A3 1/8" Bolt
DQty
01
Allen
wrench
D
D
A
A
4
4
4
4
D+A
D+A
D+A
D+A
ATTENTION:
1
1
ATTENTION:
ALIGNMENT
ATTENTION:

Attach 8 corner plate to part with 8 screws , using a Phillips screwdriver. Repeat this step 2 times.(C) 5 (B)
Step 6
Insert parts between parts .5 4
Step 5
CQty
08
Corner
plate
Qty
08
9/16" Screw
B
5
5
5
5
ATTENTION!
PRE-DRILLED HOLES
PLEASE ASSEMBLE
ON THE GROUND
BB
B
B
B
B
B
B
B
CC
C
C
C
C
C
C
C
MANUFACTURER LABEL
DO NOT REMOVE !
Phillips screwdriver
MANUFACTURER LABEL
DO NOT REMOVE !
4
4
4
ATTENTION:

Attach the other side on the parts with 4 bolts A , using 1 Allen wrench .4 (D)( )
Step 7
Step 8
Attach 8 screws on to corner plate and parts , using a Phillips screwdriver.(B) 4
Qty
08
9/16" Screw
B
Phillips screwdriver
Qty
04
A3 1/8" Bolt
DQty
01
Allen
wrench
4
4
4
4
4
4
B
B
B
B
B
B
B
D
A
D+A
D+A
D+A
D+A