P'kolino PKDKCHWT User manual

Made in Brazil.
July / 2020
20
READ ALL INSTRUCTIONS BEFORE ASSEMBLING DESK.
KEEP INSTRUCTIONS FOR FUTURE USE.
THE ASSEMBLY OF THIS PRODUCT REQUIRES TWO ADULTS.
Kids Desk
and Chair

Desk Parts:
Made in Brazil.
July / 2020
20
You will need a Phillips head screwdriver and a hammer
Tools requiRed
Phillips screwdriver Hammer
12
Manufacturer Label
14
13
11
44
44
3
3
23
23
12
12
12
12
12
5
5
10
6
7
9
8
19
19
20
21
22
15
15
16
17
18
Black
Blue
Red
Blue

Hardware:
FOR MISSING PARTS OR HARDWARE:
DO NOT CONTACT THE STORE WHERE YOU MADE YOUR PURCHASE.DO NOT CONTACT THE STORE WHERE YOU MADE YOUR PURCHASE.
Please contact the manufacturer directly at [email protected] or 888-403-8992.
For customer service cases involving hardware please provide the part number.
58 Wooden Dowels 8 x 30 (A) 04 Bolts 7 x 70 (B)
06 Bolts 7 x 50 (C) 22 Bolts 5 x 50 (D)
02 Screws 4 x 20 (E) 16 Screws 6 x 10 (F)
20 Cam Bolts (H)
02 Metal Glides 350mm (K)
02 Metal Glides 350mm (L)
16 Nail 10 x 10 (J)
01 Allen Wrench 3 (O)
01 Allen Wrench 4 (N)
20 Cam Locks (I)
06 Plastic Foot (P)

A
A
A
A
A
A
1
2
(x2)
(x2)
A
A
A
Left side
Right side
Step 1
Side Parts and Crossbars
1) Insert wooden dowels (A) into the holes, as shown in the diagram.
8 x 30 Wooden Dowel
Qty
18
A
8 x 30 Wood dowel
(-)
(-)
Step 2
1) Attach crossbars 3 and shelves 23 on sides 1 and 2 with bolts (D) using the allen wrench (O),
as shown in the diagram.
Crossbars and Shelves
Allen
wrench
3mm
Qty
01
O
Qty
12
D5 x 50 Bolt
CH
5 x 50 Bolt
1
2
3
23
23
23
3
O+D
O+D
O+D
O+D
O+D
O+D
D+O
D+O
D+O
D+O
D+O
D+O
D
O
A
A
A
3
Back
Red
Blue
Red
Blue

Step 3
(x4)
4
A
P
2) Fix the plastic foot (P) on the support feet 4 with hammer.
Support feet
8 x 30 Wooden Dowel
Qty
04
A
8 x 30 Wood dowel
Qty
04
Plastic Foot
P
Step 4
Support feet
1) Fix the support feet 4 on lower crossbars 3 with bolts (C) using the allen wrench (N) .
Allen
wrench
4mm
Qty
01
N
Qty
04
C7 x 50 Bolt
Ø13
7,0 x 50 Bolt
N
C
1) Insert wooden dowels (A) into the holes, as shown in the diagram.
Pre-drilled holes
4
N+C
N+C
3
3
4
4
4
N+C
N+C
Red
Blue
P
4

Step 5
1) Attach the metal glides (K) on sides 1 and 2 with screws (F).
Metal Glides
SET OF METAL GLIDES FOR THE DRAWERS
(K) (L)
- The glides (K) are used on panels side and has a left and right pieces.
- The glides (L) are used on drawers side, also has a left and right pieces.
(x2) (x2) (x2) (x2)
Please fix on drawers
side #15 and #19
Please fix on drawers
side #15 and #19
Please fix on panel side
side #2 and crossbar #8
Please fix on panel
side #1 and #2
Qty
04
6 x 10 Screw
Ø6,0 x 10 Screw
FCH
Qty
02
KMetal Glides
350mm
1
The wheel to
the front
F
F
F
K2
Pre-drilled holes
F
Pre-drilled
Holes
K
F
K
Red
Blue

Qty
02
6 x 10 Screw
Ø6,0 x 10 Screw
FCH
Qty
01
KMetal Glides
350mm
Step 6
1) Attach the metal glides (K) on side 2 with screws (F).
Metal Glides
1
2
F
F
K
F
5
Step 7
1) Insert wooden dowels (A) into the holes, as shown in the diagram.
Crossbars
8 x 30 Wooden Dowel
Qty
04
A
8 x 30 Wood dowel
A
A
PLEASE
ASSEMBLE ON A FLAT SURFACE.
USE A CARPET OR THE PRODUCT
CARTON TO LINE THE FLOOR.
(x2)
The wheel to
the front
K
Pre-drilled holes
Red Blue

Step 9
Post and Crossbars
1) Insert wooden dowels (A) and cam bolts (H) into the holes, as shown in the diagram.
2) Attach part 10 on upper crossbar 8, using screws (E).
A
A
E
EH
8
9
7
8 x 30 Wooden Dowel
Qty
10
A
8 x 30 Wood dowel
Qty
02
HCam Bolt
Parafuso Minifix
PLEASE
ASSEMBLE ON A FLAT SURFACE.
USE A CARPET OR THE PRODUCT
CARTON TO LINE THE FLOOR.
10
8
9
7
Step 8
Back Crossbars
1) Attach back crossbars 5 on the side panel 2 with bolts (C), usisng the allen wrench (N), as shown in the diagram.
Allen
wrench
4mm
Qty
01
N
Qty
02
C7 x 50 Bolt
Ø13
7,0 x 50 Bolt
N
C
A
A
AA
A
A
A
A
H
Pre-drilled
Holes
Blue
2
5
5
N+C
N+C
Red Blue
4 x 20 Screw
4,0 x 25 Screw Qty
02
E

F
Step 11
Metal glide
1) Attach the metal glide (K) on upper part 10, with screws (F).
Qty
02
6 x 10 Screw
Ø6,0 x 10 Screw
FCH
Qty
01
KMetal Glide
350mm
PLEASE
ASSEMBLE ON A FLAT SURFACE.
USE A CARPET OR THE PRODUCT
CARTON TO LINE THE FLOOR.
Qty
02
Plastic Foot
P
10
2) Fix the plastic foot (P) on posts 6 and 7 with hammer.
6
7
Step 10
Crossbars and Posts
1) Attach crossbars 8 and 9 on post 6 with bolts (B), using the allen wrench (N)
and then on post 7 with cam locks (I), as shown in the diagram.
Allen
wrench
4mm
Qty
01
N
8
9
6
7
N+B
N+B
Qty
02
I
Cam Lock
Tambor Minifix
Ø13
Qty
02
B7 x 70 Bolt
7,0 x 70 Bolt
PLEASE
ASSEMBLE ON A FLAT SURFACE.
USE A CARPET OR THE PRODUCT
CARTON TO LINE THE FLOOR.
F
F
Pre-drilled
Holes
K
I
I
P
P
P
The wheel to
the front
K
F
Blue
Blue
Black
Black
10
I

Step 13
Organizer
1) Insert wooden dowels (A) into the holes, as shown in the diagram.
2) Attach divisions 12 on back panel 11 with bolts (D) using the allen wrench (O).
Step 12
Crossbars
1) Attach crossbars 5 on post 6 with bolts (B), using the allen wrench (N).
Ø13
Qty
02
B7 x 70 Bolt
7,0 x 70 Bolt
Allen
wrench
4mm
Qty
01
N
Allen
wrench
3mm
Qty
01
O
Qty
05
D5 x 50 Bolt
CH
5 x 50 Bolt
D
O
12
11
O+D
O+D
O+D
O+D
Notice Board
O+D
12
AA
(x5)
8 x 30 Wooden Dowel
Qty
10
A
8 x 30 Wood dowel
12
12 12
12
Pre-drilled holes
5
5
B+N
B+N
6
Blue
Black
Red Blue
B
N

13
Notice Board
O+D
O+D
O+D
O+D
O+D
11
Step 15
Desk Top
1)Attach the organizer on top 13 with bolts (D) using the allen wrench (O).
Allen
wrench
3mm
Qty
01
O
Qty
05
D5 x 50 Bolt
CH
5 x 50 Bolt
Step 14
Top
Qty
06
HCam Bolt
Parafuso Minifix
H
H
H
H
13
PLEASE
ASSEMBLE ON A FLAT SURFACE.
USE A CARPET OR THE PRODUCT
CARTON TO LINE THE FLOOR.
1) Insert cam bolts (H) into the holes, as shown in the diagram.
INSIDE
H
H
Pre-drilled holes
D
O

I13
II
I
II
Step 16
Top
Top
1) Attach the top 13 to the desk structure, tting the wooden dowels (A) and cam bolts (H) into
1) Fix the top 13 to the desk structure, using cam locks (I), locking with Phillips screwdriver, according the detail 1.
Step 17
Be careful to not damage!
13
Pre-drilled holes
the pre-drilled holes.
Qty
06
I
Cam Lock
Tambor Minifix
I
I
Back side
Detail 1
I

14
J
JJ
J
J
J
J
J
JJJ
J
J
J
J
J
Step 18
Back Panel
1) Attach the back panel 14 on the sides of desk, using nails (J) and a hammer.
JQty
16
10 x 10 Nail
Manufacturer Label
Step 19
High Drawer Components
8 x 30 Wooden Dowel
Qty
08
A
8 x 30 Wood dowel
1) Insert wooden dowels (A) and cam bolts (H) into the holes, as shown in the diagram.
Qty
08
HCam Bolt
Parafuso Minifix
15
(x2)
H
H
H
H
H
H
H
A
A
A
A
16
18
H

High Drawer
1) Attach drawer sides 15 on the drawer front 16 with cam locks (I).
2) Insert drawer bottom 17, as shown in the diagram.
3) Attach back side 18 on the drawer sides 15, using cam locks (I)
Step 20
Step 21
High Drawer
1) Attach metal glides (L) on drawer sides 15 using screws (F) .
F
F
F
L
15
15
The wheel to
the back
BACK
SIDE
Qty
04
6 x 10 Screw
Ø6,0 x 10 Screw
FCH
Qty
01
LMetal Glides 350mm
F
Pre-drilled holes
L
Qty
08
I
Cam Lock
Tambor Minifix
15
16
15
15
15
I
I
I
II
II
I
15 15 17
18
I
I
F
L
Groove
inside

Step 22
Low Drawer Components
8 x 30 Wooden Dowel
Qty
04
A
8 x 30 Wood dowel
Qty
04
HCam Bolt
Parafuso Minifix
1) Insert wooden dowels (A) and cam bolts (H) into the holes, as shown in the diagram.
A
H
A
H
H
H
19
22
20
(x2)
Step 23
Low Drawer
1) Attach drawer sides 19 on the drawer front 20 with cam locks (I).
2) Insert drawer bottom 21, as shown in the diagram.
3) Attach back side 22 on the drawer sides 19, using cam locks (I)
Qty
04
I
Cam Lock
Tambor Minifix
19
20
19
21
I
I
I
I
19
19
19
19
22
I
Groove
inside

Step 24
Low Drawer
1) Attach metal glides (L) on drawer sides 19 using screws (F) .
Qty
04
6 x 10 Screw
Ø6,0 x 10 Screw
FCH
Qty
01
LMetal Glides 350mm
19
19
F
F
F
F
L
L
F
L
The wheel to
the back
Pre-drilled holes
BACK SIDE
Step 25
Desk
1) Insert the drawers, as shown in the diagram.

Step 26
Desk and Chair
1) Insert the Chair, as shown in the diagram.

This product has been carefully crafted of MDF, solid pine wood and/or pine veneers. These materials derive
from plantations, a renewable and well managed forest, therefore, not endangering the environment. The highest
quality standards have been implemented to assure a sturdy and reliable product. Due to the natural variances in
the graining of wood, you may notice subtle differences in the shading and tone of the color stain, warp, holes,
wood knots and also small cracks. This is not a defect. But rather a result of the natural beauty of the wood itself.
ABOUT WOOD AND FINISH: