Pace IPH8000 User manual

Data Sheet IPH8000
Cost-optimized, high performance HD IPTV Set-Top Box
Pace’s IPH8000 HD IPTV client is a cost-optimized, high-
performance non-DVR set-top box which supports multiple wired
connectivity options including Ethernet and HomePNA over coax.
Using HomePNA to deliver IPTV over an existing in-home coax
network, operators can save significantly on installation costs.
The IPH8000 advanced system-on-a-chip design decodes a wide
variety of high definition video standards including MPEG-4. MPEG-4
video streams require significantly less bandwidth than MPEG-2 to
deliver quality video services, which helps operators support growing
consumer demand for high bandwidth HD programming over their
IPTV networks. The solution also employs multiple on-board video
accelerators. These ensure the best possible experience when
consumers engage with today’s IP-delivered features like cloud guides,
over-the-top (OTT) video, and applications.
The IPH8000 platform is optimized for use with Microsoft Mediaroom™
and is the highest performing Mediaroom-certified client available.
Key Features
• High-performance, Mediaroom-certified client platform
• Low-power, fanless design
• 128 MByte FLASH
• 256 MByte SDRAM
• Comprehensive and advanced device connectivity including HDMI
• LED indicators: Power, Link, HD, Record
• 1288 Dhrystone MIPS System-on-Chip with media coprocessors
• Ethernet port
• HomePNA 3.1 over Coax interface
• USB 2.0 port for future expansion

IPH8000
Technical Specifications
Network Interfaces
1 x HomePNA 3.1 Interface Over Coax
1 x Fast Ethernet (10/100 Mbps) Port
Audio Video Output
MPEG-4 MP@ML and MP@HL ATSC A/54 Decode up to 1080p30
480i, 480p, 720p, 1080i and 1080p30 Scaling Modes
Macrovision Copy Protection Capability v7.1
System Processor / Memory
Sigma 8652 Core Processor for System and Application Use
128 MB FLASH Memory
256 MB SDRAM
Graphics
Alpha Blending Graphics Plane
RGB565, ARGB1555, ARGB444, ARGB888, YUYV,
AYUV888, RGB888, YVU420 Source Pixel Formats
ARGB888, AYUV8888 Presentation Pixel Formats
Software
Support for Microsoft Mediaroom or Minerva xTVFusion Middleware
Advanced diagnostics capable
Security
Microsoft Playready for Mediaroom
Front Panel
7 Buttons: Power, Menu, Up, Down, Left, Right, OK
4 LED indicators: Power, Link, HD, Record
USB 2.0 Port
IR Receiver
Rear Panel
HDMI 1.3a Audio / Video Out with HDCP Copy Protection
Component (Y Pb Pr) Video RCA Outputs
Composite Video RCA Outputs
L/R Audio RCA Outputs
5.1 Dolby Digital Optical Output
1 x Fast Ethernet (10/100 Mbps) Port
1 x HomePNA 3.1 Interface Over Coax
Physical Specifications
8.2” x 5.5” x 1.5” (20.7 cm x 14 cm x 3.8 cm)
0.8 lbs (13.5 oz)
Accessories
Consumer Quick Start Guide
External Power Supply (5.1V/2.3A)
For more information on the IPH8000 or any other Pace product
please visit our website www.pace.com/americas
IPH8000-0214-2
This specification is subject to change without notice
Pace Americas, 1764 Automation Parkway, San Jose, CA 95131
Tel: [phone] Fax: [phone]
Pace and are trade marks and/or registered trade marks of Pace plc.