DX-825 End-User Manual
______________________________________________________________________________
If the Login web page is not accessible:
Check the power at the modem. The “WiFi” and “Globe” LED should lit up.
Please check whether the LAN cable is attached properly or WiFi is activated.
Go to Windows Start -> Run, type “cmd” and press Enter. Type “ping
10.1.1.254” and check for reply.
Type “ipconfig” in Command Prompt to check if the modem’s IP is different
from the default setting or if there is an IP assignment conflict with different
device.
If Username or Password has been changed and they are forgotten:
Click the “FORGOT PASSWORD?” link at the Login web page as shown in
the visual below.
Follow the instructions that appear at the bottom of the web page.
Note: Factory default will also reset modem’s settings configured by user.
