Paitec IM-9500 Print "n" Mail User manual

IM-9500
Print “n” Mail
Paitec USA Pressure sealer
User Manual
This manual provides detailed information on how to operate and maintain
your IM- 9500 Print “n” Mail”.
Please read this manual before operating the machine in order to prevent
any damage caused by improper handling

- 2 -
Introduction
Thank you for purchasing a IM-9500 Print “n” Mail product.
This manual is prepared to provide you with guidelines on how to properly operate
and maintain the IM-9500.
Copyright
Any of the contents should not be copied, re-printed or translated by other
languages without Paitec USA approval.

- 3 -
IM-9500 INDEX
1. Installation
1) Accessories
2) IM-9500 Installation Process
3) Printer Installation
4) Ready for Operation
2. Operation
3. Problem Handling
4. Engineering Mode
5. Cleaning the contamination
6. Software Installation and Upgrade

- 4 -
•IM-9500 offers the most heavy duty print “n” mail pressure sealer and comes with
various security solutions. It provides excellent sealing quality with the 2 pairs of pressure
rollers and is capable of processing of 200,000 forms per month.
IM -9500 (Inline Pressure Sealer)
•Form Size : A4 / Letter / Legal size
•Speed : Up to 3,600 sheets per hour based on a 60 ppm printer
•Fold Setting : Manual
•Paper weight : 60-120gsm
•Fold type : Z, C, V & Double
•Double Detect : By pass tray and sensor
•Stacker : Auto slide conveyor (*600 sheets)
•Printer Compatibility : HP LJ4515 laser printer series(duplex available)
•Duty cycle : 200,000 sheets per month(without printer)
•Height Adjustable : 0- 80mm
•*Based on 90gsm paper weight
IM-9500 Spec.
•HP Laserjet 4010, 4015, 4110, 4515, 4515x 4550
•Height adjustable table can be also compatibility with other printers.
•Recommended Printer for PAITEC PRESSURE SEALERS IS HP LJ4515 laser printer series.
•Please note extra paper trays will be required in order for the system to function properly
IM-9500 Compatibility
HP LJ 4515 PRINTER
IM9500 Spec.

Accessories
[IM-9500 Body] [IM-9500 Interface]
[Auto Slide Conveyor]
[OP REMOTE ]
Security cover
[Printer mounting base
plate]
[BOX OPEN]
[Screws]
[Interface Feeding Guide]
[Communication cable]
[Power cable]
[User Manual]
Installation

- 6 -
IM-9500 Installation Process Installation
Connect IM-9500 body with printer base
plate and screw
Picture showing printer base plate
connected
•Adjustable Screw
•Fixed hole for
printer
①Installation for printer base plate and load the printer.
•Unscrew the IM-9500 body from the packing pallet and screw the printer base plate to
connect the printer.
Load the printer onto the printer base plate and adjust the height using the 2
height adjustment bolts. Please note you will require an adjustable spanner for this
task
Unscrew the IM-9500 Body that is assembled on the packing pallet.

IM-9500 INDEX
1. Installation
2. Operation
1) Checklist before operation
2) Folding list and setting
3) Standard Operation
4) Demonstration
5) Other operation
3. Problem Handling
•Printer Error
•Double Detect
•Paper Jam Removal
•Jam removal Sealing rollers
4. Engineering Mode
5. Cleaning the contamination
6. Software Installation and Upgrade

- 8 -
IM-9500 Installation Process Installation
Screw the interface to the main body (Back) Screw the interface. (Front)
②OP panel & Interface
Assemble the interface to IM-9500. The
interface will slide right to left to engage
properly
Connect the OP panel cable to IM-9500 as shown
•Picture shows the complete installation of
the op panel and interface

- 9 -
IM-9500 Installation Process Installation
③Security Cover & Conveyor
Locate & fix the Security upper cover with
2 screws supplied
Screw the interface and security upper cover
with the 2 screws supplied
Screw the lower security cover onto the
interface with screws supplied
Place the conveyor on to IM-9500
Fix the conveyor as shown with M4 screws
supplied
Install the conveyor guide roller.

IM-9500 Installation –Conveyor Wheels
- 10 -
The position of the conveyor wheels is very important. Having the right position will
minimize jamming of forms on the out-feed.
1. Place the conveyor wheels onto the conveyor bracket located on the out-feed of the
IM-9500 (Fig 1)
2. Adjust the wheels to suit the fold type (Fig 2)
3. Adjust the conveyor speed con (Fig 3)
Place wheels onto mounting bracket By sliding the wheels in and out you
can adjust to suit your fold type
Examples for setting the wheels to correct position
A4 –Z-Fold wheels should be set at the shortest position.
(Slide the wheels in)
A4 –Z-Fold wheels should be set to their longest position
(Slide the wheels out)
Conveyor speed pot. Rotate this to speed
up or slow down the conveyor to suit. It is
always best to have the forms
over-lapping, this will make sure you maxi
mise the holding capacity of the conveyor
Fig 1 Fig 2
Fig 3