Palstar DL2K User manual
Palstar Incorporated
9676 N. Looney Rd.,
Piqua, OH 45356 USA
Customer Service and Sales Telephone:
1-800-773-7931
Fax:
1-937-773-8003
Email:
Rev 2.0 September 0 20 0
© Copyright 2007-2010 Palstar Inc.
Printed in the U.S.A.
DL2K 2000 Watt Dummy Load
Owner’s Manual
2 DL2K Dummy Load
1-8 00- 773- 7931 W WW.P ALS T AR.COM
SPECIFICATIONS
IMPEDANCE 56Ω +0/-10%
SWR <1.3 DC—30 Mhz
POWER DISSIPATION SEE CHART BE OW
RATING/FREQUENCY: DC—30 Mhz 2000 w
Single tone CW — 1 Minute
Max. (Fan on.)
POWER: 12vdc @300ma center
positive required to
operate fan and thermo
controlled feature
DL2K Dummy Load 3
1-8 00- 773- 7931 W WW.P ALS T AR.COM
The Palstar D 2K dummy load utilizes solid ceramic
resistive elements that are non-inductive and very re-
sistant to overload and high temperature operation.
New Feature: The D 2K now has a thermostatically
controlled fan cooling system. With the fan switch in
the ON position, the fan runs continuously as long as
power is supplied to the unit. With the fan switch in the
OFF position, the fan will come on automatically when
the internal resistors reach a pre-set temperature.
Although the meter scale indicates a maximum of 5000
watts (500 x 10), the maximum rated dissipation is
2000 watts for up to 1 minute with the fan on (see
Power Capability chart).
Rear Connector
requires 12vdc
center positive
female plug at
300ma (Female
Plug Supplied)
Other Palstar Radio manuals
