Panasonic DP-80116P User manual

Getting To Know
Your Machine
Before Starting
Making Copies
Function
Network Scanner
Appendix
Operating Instructions
(For Copy & Network Scan Functions)
Digital Imaging Systems
Model No. DP-8020E / 8020P / 8016P
Before operating this machine, please carefully read this manual, and keep this
documentation in a safe place for future reference.
(Illustration shows optional accessories that may not be installed on your machine.) English
Accessories
Problem Solving

2
Getting To Know Your Machine
Useful Office Functions/Operating Instructions
Copy
•Copy up to Ledger size originals.
•Capable of copying text/photos/
halftone originals.
Scan/File
•Monochrome scanner capability.
(For DP-8020E/8020P only)
•Scanning resolution up to: 600 dpi
Fax/Email
•Plain Paper High-speed Super G3
compatible Fax with JBIG compression
when optional Fax Communication
Board (DA-FG180) is installed.
(For DP-8020E/8020P only)
•Quick-Scan
•Quick Memory Transmission
•Email Function capability.
Print
•Printer controller standard, printer
resolution 300 or 600 dpi.
<Copy & Network Scan>
<Print &
Other Advanced
Functions>
Use the information provided on the enclosed CD whenever a Copy & Network Scan Function requires
intervention.
For example: How to make copies, add paper, replace the toner bottle, etc.
Use the information provided on the enclosed CD for an explanation of how to use as a Network Printer,
Network Scanner, Edit Directory Dialling Feature, Device Settings, Network Status Monitor, and/or Document
Management System.
■The following operating instruction manuals are included on the CD for this machine, please use the correct manual when an operator
intervention is necessary.
Application Software
•Quick Image Navigator
• Network Scanner when optional Network Scanner Module is installed.
• Utilities (Network Status Monitor, Address Book Editor, Network Configuration Editor)
•Panafax Desktop when optional Fax Communication Board is installed.
Multi-Tasking Job Table
Facsimile
(Receiving)
Memory
Receiving
Printing Received
Memory Data
Storing
Document
Memory
Transmission
Receiving
Data
Printing
Received Data
Storing
Document
Transmission
Facsimile
(Sending)
GDI/PCL/PS
Printing
Network Scanning
Internet Fax
Current
Job
2nd Job
Copy
Copy
Copy
Network Scanning, Internet Fax
Storing Document
GDI/PCL/PS Printing
Receiving Data
Printing Receive Document
Facsimile (Sending)
Storing Document
Memory Transmission
Facsimile (Receiving)
Memory Receiving
Printing Received
Memory Data
*
: Accepts and executes the 2nd Job.
: Accepts and executes the 2nd Job (Copy) only if the Current Job is interrupted.
: Accepts the 2nd Job and executes the 2nd Job after the Current Job is completed.
: Not applicable.
NOTE ∗: HDD (DA-HD18) and additional 16MB (minimum) Image memory are required.
DP-8020P is not available for USA and Canada.

3
Getting To Know
Your Machine
Operating Instructions Outline
Function
Getting To Know
Your Machine
Before Starting
Making Copies
Network Scanner
Problem Solving
Appendix
●Precautions (See pages 7-13)
●Quick Operation Chart, Adding Paper (See pages 14, 15)
●Problem Solving, Memory Full,
Replacing Toner Bottle/Toner Waste Container,
Removing Misfed Paper,
Error Codes (U Code/J Code) (See pages 15-21)
●Control Panel Key/Indicator Names
(See pages 22, 23)
●Operating Instructions for making copies
(See pages 24-51)
●Changing the Initial Machine Modes
●General, Copier, Printer and Scanner Settings
(See pages 52-67)
●Combined Function Table (See page 68)
●Document Scanning (See pages 70, 71)
●Address Book (See pages 72-73)
●Function (See pages 74, 75)
●Direct Connection (with Crossover Cable)
(See pages 76, 77)
●Troubleshooting (See pages 78, 79)
●Replacing the Battery/Set the Date and Time
(See pages 80, 81)
●Specifications, Options and Supplies
(See pages 82-84)
Accessories
●Components (See page 69)
●ADF, i-ADF (See page 25)

4
Getting To Know Your Machine
The following Symbols/Icons are used throughout this operating instructions manual.
Place original(s) on the ADF/i-ADF
Place original on the Platen
(Book)
Place original on the Platen
(Sheet)
Press any Hard Key on the
Control Panel
Input text with a Keyboard
(Option)
Input numbers
●Number of Copies, etc.
Go to next step
Go to next step (below)
When making copies
When scanning document(s)
Getting to know your machine
Before starting
Problem solving
Appendix
When setting the machine
modes
Press Hard Key
A
B
C
Symbols/Icons
5
Accessories

5
Getting To Know
Your Machine
Getting To Know Your Machine
Getting to Know Your Machine
Useful Office Functions/Operating Instructions .......................................................................... 2
Multi-Tasking Job Table .................................................................................................................. 2
Operating Instructions Outline ...................................................................................................... 3
Symbols/Icons ................................................................................................................................. 4
Safety Information........................................................................................................................... 7
Precautions.................................................................................................................................... 11
Operation Chart ............................................................................................................................. 14
■Quick Operation Chart ................................................................................... 14
●Adding Paper .............................................................................................. 14
■Problem Solving ............................................................................................. 15
●Toner Level Check Operation ..................................................................... 15
●Memory Full................................................................................................ 15
●Replacing Toner Bottle/Toner Waste Container.......................................... 16
●Removing Misfed Paper ............................................................................. 16
●User Error Codes (U Code) ........................................................................ 20
●Jam Error Codes (J Code) ......................................................................... 21
Before Starting
Control Panel ................................................................................................................................. 22
Making Copies
Basic Copy ■Copying the Same Size Originals (1:1) .......................................................... 24
■Position of the Original(s) ............................................................................... 24
■Copying with Preset or Variable Zoom Ratios ................................................ 24
■Using the ADF/i-ADF (Option) ........................................................................ 25
Creative Features ■ 1 2 Copy, 2 2 Copy, 2 1 Copy (DP-8020E/8020P with optional ADF only) .... 26
■2
2 Copy, 2 1 Copy (DP-8020E/8020P with optional ADF only) .......... 28
■Book
2 Copy (DP-8020E/8020P only) ...................................................... 30
■N in 1 .............................................................................................................. 32
■2 Page Copy .................................................................................................. 34
■Double Exposure ............................................................................................ 36
■Erase (Margin/Edge) ...................................................................................... 38
■Erase (Book) .................................................................................................. 38
■Effects (Centering/Image Repeat) .................................................................. 40
■Sort................................................................................................................. 42
Other Features ■Skyshot Mode (Digital/Manual Skyshot Mode) .............................................. 44
■Job Build and SADF Mode ............................................................................. 46
■Concurrent Copying ....................................................................................... 46
■Interrupt Mode ................................................................................................ 48
■Energy Saver (Power Saver Mode, Sleep/Shutdown Mode) ......................... 48
■Job Memory ................................................................................................... 48
■Completion Notice .......................................................................................... 50
Table of Contents

6
Getting To Know Your Machine
Table of Contents
Function
■Using Function Modes to Change the Initial Machine Modes ........................ 52
■Procedure....................................................................................................... 52
■General Settings ............................................................................................ 54
■General Settings (For Key Operator) ............................................................. 54
■Copier Settings ............................................................................................... 57
■Copier Settings (For Key Operator) ............................................................... 58
■Printer Settings ............................................................................................... 59
■Printer Settings (For Key Operator) .............................................................. 60
■Scanner Settings ............................................................................................ 61
For Example................................................................................................................................... 62
■Changing the Paper Size (Paper Tray) .......................................................... 62
■Department Counter....................................................................................... 64
■Network Settings ............................................................................................ 66
Combined Function Table ............................................................................................................ 68
Accessories
Components .................................................................................................................................. 69
Network Scanner
Document Scanning ..................................................................................................................... 70
■Document Scanning ....................................................................................... 70
Address Book ................................................................................................................................ 72
■Adding your PC’s IP Address ......................................................................... 72
Function ......................................................................................................................................... 74
■Scan Parameters ........................................................................................... 74
■Select Mode ................................................................................................... 74
Direct Connection (with Crossover Cable) ................................................................................. 76
■Direct Connection (with Crossover Cable) ..................................................... 76
Problem Solving
Troubleshooting ............................................................................................................................ 78
Replacing the Battery/Set the Date and Time ............................................................................. 80
Appendix
Specifications ................................................................................................................................ 82
■DP-8020E/8020P/8016P (For Copier) ........................................................... 82
■Network Scanner ............................................................................................ 83
■ADF (DA-AS181)/i-ADF (DA-AR202) ............................................................. 83
■2nd/3rd/4th Paper Tray (DA-DS184/DS185) .................................................. 83
Options and Supplies ................................................................................................................... 84
■Options ........................................................................................................... 84
■Supplies ......................................................................................................... 84

7
Getting To Know
Your Machine
Getting To Know Your Machine
Safety Information
For Your Safety
To prevent severe injury and loss of life, read this section carefully before using the Panasonic
DP-8020E/8020P/8016P to ensure proper, and safe operation of your machine.
■This section explains the Warnings and Cautions used in this Operating Instructions manual.
WARNING Denotes a potential hazard that could result in serious injury or death.
CAUTION Denotes hazards that could result in minor injury or damage to the machine.
■This section also explains the graphic symbols used in this Operating Instructions manual.
These symbols are used to alert operators to a specific operating procedure
that must not be performed.
These symbols are used to alert operators to a specific operating procedure
that must be emphasized in order to operate the machine safely.
This symbol is used to alert operators to a heated surface that may cause
burns and requires close attention.
Power and Ground Connection Cautions
Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can draw a significant amount of current that can generate heat, and
eventually cause fire if left unattended over an extended period of time.
Always use the power cord provided with your machine. When an extension power cord
is required, always use a properly rated cord.
●120 V/15 A
If you use a cord with an unspecified current rating, the machine, or plug may emit
smoke, or become hot to the touch.
Do not attempt to repair, pull, bend, chafe, or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause fire, or electric shocks.
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is broken, or insulated wires are exposed, contact your authorized
Panasonic dealer for a replacement. Using a damaged cord can cause fire, or electric
shocks.
Stop operation immediately if your machine emits smoke, excessive heat, unusual noise
or smell, or if water is spilt onto the machine. These conditions can cause fire.
Immediately switch Off and unplug the machine, and contact your authorized Panasonic
dealer.
Do not disconnect, or reconnect the machine while the power switch is in the On
position. Disconnecting a live connector can cause arcing, consequently deforming the
plug and cause fire.
When disconnecting the machine, grasp the plug instead of the cord. Pulling on a cord
forcibly can damage it, and cause fire, or electric shock.
When the machine is not used over an extended period of time, switch it Off and unplug
it. If an unused machine is left connected to a power source for a long period, degraded
insulation can cause electric shocks, current leakage or fire.
WARNING

8
Getting To Know Your Machine
Be sure to switch Off and unplug the machine before accessing the interior of the
machine for cleaning, maintenance or fault clearance. Access to a live machine’s interior
can cause electric shock.
Once a month, unplug the machine and check the power cord for the following. If you
notice any unusual condition, contact your authorized Panasonic dealer.
●The power cord is plugged firmly into the receptacle.
●The plug is not excessively heated, rusted, or bent.
●The plug and receptacle are free of dust.
●The cord is not cracked or frayed.
Operating Safeguards
Do not touch areas where these caution labels are attached to, the surface may be very
hot and may cause severe burns.
Do not place any liquid container such as a vase or coffee cup on the machine. Spilt
water can cause fire or shock hazard.
Do not place any metal parts such as staples or clips on the machine. If metal and
flammable parts get into the machine, they can short-circuit internal components, and
cause fire or electric shocks.
If debris (metal or liquid) gets into the machine, switch Off and unplug the machine.
Contact your authorized Panasonic dealer. Operating a debriscontaminated machine can
cause fire or electric shock.
Never open or remove machine covers that are secured with screws unless specifically
instructed in the “Operating Instructions”. A highvoltage component can cause electric
shocks.
Do not try to alter the machine configuration or modify any parts. An unauthorized
modification can cause smoke or fire.
Consumable Safeguards
Never dispose of toner, toner cartridge or a toner waste container into an open flame.
Toner remaining in the cartridge can cause an explosion, burns and/or injuries.
Keep button batteries/stamp out of the reach of children. If a button battery/stamp is
swallowed accidentally, get medical treatment immediately.
Safety Information

9
Getting To Know
Your Machine
Installation and Relocation Cautions
Do not place the machine near heaters or volatile, flammable, or combustible materials such as
curtains that may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment. Prolonged
exposure to these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can withstand a weight of 99 lb (DP-8020E/
8020P) / 96 lb (DP-8016P). If tilted, the machine may tip-over and cause injuries.
When relocating the machine, contact your authorized Panasonic dealer.
When moving the machine, be sure to unplug the power cord from the outlet. If the machine is
moved with the power cord attached, it can cause damage to the cord which could result in fire or
electric shock.
Operating Safeguards
Do not place a magnet near the safety switch of the machine. A magnet can activate the machine
accidentally, resulting in injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire.
When copying a thick original, do not use excessive force to press it against the platen glass. The
glass may break and cause injuries.
Never touch a labelled area found on or near the heat roller. You can get burnt. If a sheet of paper
is wrapped around the heat roller, do not try to remove it yourself to avoid injuries or burns. Switch
Off the machine immediately, and contact your authorized Panasonic dealer.
Do not use conductive paper, e.x:. folding paper, carbonic paper and coated paper. When a misfed
paper jam occurs, they can cause a short-circuit and fire.
Do not place any heavy objects on the machine. An off-balance machine can tip-over or the heavy
object can fall, causing damage and/or injuries.
Keep the room ventilated when using the machine for an extended period of time to minimize the
ozone density in the air.
When copying with the platen cover open, do not look directly at the exposure lamp. Direct eye
exposure can cause eye fatigue or eye injury.
Pull out paper trays slowly to prevent injuries.
When removing misfed paper, make sure that no pieces of torn paper are left in the machine. A
piece of paper remaining in the machine can cause fire. If a sheet of paper is wrapped around the
heat roller, or when clearing a misfed paper that is difficult or impossible to see, do not try to
remove it by yourself. Doing so can cause injuries or burns. Switch Off the machine immediately,
and contact your authorized Panasonic dealer.
If accessing the inner components of the machine to clear misfed paper, etc., exercise care not to
touch heated areas, or you may get burned.
Others
■When clearing a paper jam or other fault, follow the appropriate procedure given in the Operating Instructions.
CAUTION

10
Getting To Know Your Machine
Safety Information
For Your Safety
Consumable Safeguards
Be sure to use the specified type of batteries only.
Ensure that batteries are installed with correct polarity. Incorrectly installed batteries can
burst or leak, resulting in spillage or injuries.
Others
■The machine has a built-in circuit for protection against lightning-induced surge current. If lightning
strikes in your neighborhood, maintain ample distance from the machine, and do not touch the
machine until the lightning has stopped.
■If you notice flickering or distorted images or noises on your audio-visual units, your machine may
be causing radio interference. Switch it Off and if the interference disappears, the machine is the
cause of the radio interference. Perform the following procedure until the interference is corrected.
●Move the machine and the TV and/or radio away from each other.
●Reposition or reorient the machine and the TV and/or radio.
●Unplug the machine, TV and/or radio, and replug them into outlets that operate on different
circuits.
●Reorient the TV and/or radio antennas and cables until the interference stops. For an outdoor
antenna, ask your local electrician for support.
●Use a coaxial cable antenna.
Denotes hazards that could result in minor injury or damage to the machine.
●TO REDUCE THE RISK OF SHOCK OR FIRE, USE ONLY NO. 26 AWG OR LARGER TELEPHONE
LINE CABLE.
●DISCONNECT ALL POWER TO THE MACHINE BEFORE COVER(S) ARE REMOVED. REPLACE
THE COVER(S) BEFORE THE MACHINE IS RE-ENERGIZED.
When using your telephone equipment, basic safety precautions should always be followed to reduce
the risk of fire, electric shock and injury to persons, including the following:
●DO NOT USE THIS PRODUCT NEAR WATER, FOR EXAMPLE, NEAR A BATH TUB, WASH
BOWL, KITCHEN SINK OR LAUNDRY TUB, IN A WET BASEMENT OR NEAR A SWIMMING
POOL.
●AVOID USING A TELEPHONE (OTHER THAN A CORDLESS TYPE) DURING AN ELECTRICAL
STORM. THERE MAY BE A REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTNING.
●DO NOT USE THE TELEPHONE TO REPORT A GAS LEAK IN THE VICINITY OF THE LEAK.
SAVE THESE INSTRUCTIONS.
CAUTION
CAUTION
IMPORTANT SAFETY INSTRUCTIONS

11
Getting To Know
Your Machine
Manufacturer s Name
and Address
Factory ID
•ATTENTION:Hot Surface
•ATTENTION:Zone chauffée
•ACHTUNG :Heiße Oberfläche
•ATENCION :Superficie caliente
• •
FDA1992
■Laser Safety
■Caution Label
LASER SAFETY
This unit employs a laser. Only qualified service personnel
should attempt to service this device due to possible eye
injury.
CAUTION:
USE OF CONTROLS, ADJUSTMENTS OR
PERFORMANCE PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
Precautions
Precautions
This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some
components.
Disposal of these materials may be regulated in your community due to environmental considerations.
For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance:
<http://www.eiae.org>.
CAUTION

12
Getting To Know Your Machine
Precautions
Installation
■The maximum power consumption is 1.3 kW.
A properly wired (grounded), dedicated, 15 A, 120 V AC outlet is required. Do not use an extension
cord.
The power cord on this machine must be used to disconnect the main power.
Please ensure that the machine is installed near a wall outlet and is easily accessible.
Supplies
■Store the Toner and paper in cool areas with low humidity.
●Use high quality 16 - 24 lb (Sheet Bypass: 15 - 34 lb) paper.
●For optimum performance, it is recommended that only Panasonic Brand supplies are used in
the machine.
●Certain types of transparency film may not be compatible and may damage your machine.
Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.
(Panasonic has tested “3M PP2500” transparency film and found it to be compatible.)
●Panasonic recommends using high quality 16 - 24 lb paper, using an inferior paper may cause
excessive paper curl, requiring you to empty out the Output Tray more often to avoid paper jams.
■Use of other than genuine Panasonic supplies can damage the printer. This may void the warranty
of the printer and supplies. Be sure to use only genuine Panasonic Toner designed for the machine.
■The machine should not be installed in areas with the following conditions:
●Extremely high or low temperature and humidity.
The machine should be installed under the following ambient conditions:
Temperature: 50-86 °F
Relative humidity: 30-80 %
●In areas with chemical fume concentration.
●With unstable or uneven conditions (floors, etc.).
●Direct exposure to sunlight or fluorescent light.
●In areas of high dust concentration.
●Directly in the air conditioning flow.
●In areas of poor ventilation.
●In areas with extreme vibration.
Illegal Copies
It is unlawful to make copies of certain documents.
Copying certain documents may be illegal in your country. Penalties of fines and/or imprisonment may
be imposed on those found guilty. The following are examples of items that may be illegal to copy in
your country.
●Currency
●Bank notes and checks
●Bank and government bonds and securities
●Passports and identification cards
●Copyright material or trademarks without the consent of the owner
●Postage stamps and other negotiable instruments
This list is not inclusive and no liability is assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice:
Install your machine near a supervised area to prevent illegal copies from being made.
Others
Panasonic is not responsible for data loss and any consequence caused by computer virus infection
or external shocks.

13
Getting To Know
Your Machine
Handling
■Do not turn the Power Switch Off, or open the Front Cover during copying/printing.
■Sleep/Shutdown Mode Notice
●The following functions will not work if the Sleep/Off Mode setting is set to the Shutdown mode.
When using any of the following functions, we recommend that you leave the Sleep/Off Mode in the
initial factory default setting (Sleep mode).
-Turn OFF the Main Power Switch on the Rear Side of the machine.
-Printer Function (Local Parallel Port and Network Connections)
-Internet Fax/Email Function
- Facsimile Function (Option)
When the LAN cable is not connected and DHCP Default is "Yes"
■Key Operator Password
●The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes
require the Key Operator Password.
■User Authentication
The User Authentication works for this machine under the management of the Windows Server. As a result,
users must be authenticated before they can use the functions of the machine (copying, faxing, scanning,
and printing). The supported authentication protocol is NTLM v2.
Users
- Users login to this machine using their Windows account (user name and password).
System Administrator
- The system administrator can manage user account by using Windows Server.
- User authentication can be set independently for each function (copying, faxing, scanning, and printing).
■Dept. (Departmental) Code
When the Department Counter function is set up, the Dept. (Department) Code input screen is displayed on
the LCD Display. A registered Department Code (1 to 8- digit) is required to gain access to each secured
function, or the secured Copy/Fax/Scanner function(s) cannot be used. Please consult with the Key Operator
regarding the Department Code(s) for the desired function.
Procedures :
1 Input a registered department code (1 to 8-digit).
2 Press the SET or START key.
■Maximum Copies Limitation
After setting the maximum allowed number of copies for each department, consult with your Key Operator
when the total copy count reaches the designated limit and the “DEPT.MAXIMUM COPIES HAS BEEN
REACHED” message appears on the LCD.
■Power Switch
If you are not going to use the copier for long periods of time, turn OFF the Main Power Switch on the Back
Side of the machine.
■Auto Reset Time
As the initial setting for Auto Reset Time is 1 minute, the selected operation mode goes back to default
operation mode after 1 minute. If you wish to change the Auto Reset Time, consult with your Key Operator.

14
Getting To Know Your Machine
INV
INV LTR LGL LDR
LTR
LDR
INV
LTR
LGL
INV
LTR
INV
INV-R
LTR-R
LGL
LDR
Width Guides
Face Down
Until it stops
Upper Limit Guides
Until it stops
Sheet Bypass
PUSH
Paper Tray
Max Level
Indicator
Paper Tray
∗∗
∗∗
∗Hold the guides by the center when
adjusting the width
Operation Chart
If set in other
function mode
(DP-8020E/8020P
only)
Face Up
A
B
C
From
ADF/i-ADF
(Option)
From
Platen Face Down
●If the original is not positioned
properly, a portion of the original
may not be copied.
●For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
or
●Adding Paper (Paper Tray)
The following steps are for Paper Tray-1, use the same procedures for other optional Paper Trays.
●Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
Load Paper: Face Up
Paper Weight: 16 - 24 lb
Paper Capacity: 550 Sheets (20 lb)
Adjust the width guides.
Incorrect adjustment may cause the
paper to wrinkle, misfed or skew.
Original Guides
■Quick Operation Chart
NOTE:
When changing the paper size,
refer to page 62.
1
123
Adding Paper Turn the Power
Switch to the
ON position
Original Guides∗∗
∗∗
∗
Adjust to the
original's width
Tray
(Max. 50 Letter
size originals)
INV: Invoice, LTR: Letter
LGL: Legal, LDR: Ledger
4
4Load Paper
(Do not exceed limit guides)
Paper Weight: 15-35 lb
Paper Capacity: 50 sheets/20 lb
To add paper to the Sheet Bypass,
remove the leftover paper from the
tray, and align it with the additional
paper and load them together onto the
tray.
NOTE:
Make sure that the paper is set
properly and that it does not exceed
the Max. Level indicator.
2
123

15
Getting To Know
Your Machine
Reduction/
Enlargement
only
■Problem Solving
34
Number of
Copies
(Max. 999)
5
Select desired settings
(See pages 24-51)
Interrupt
(See page 48)
Sort
(See page 42)
Zoom Mode
(See page 25)
Adding Paper
Replacing Toner Bottle/Toner Waste Container
(See page 16)
Checking Toner (See below)
Removing Misfed Paper (See page 16)
U## (User Error Code) (See page 20)
J## (Jam Error Code) (See page 21)
E## (Machine Error Code) (Call your Service provider)
REPLACE DRUM UNIT (Call your Service provider)
LTR ->INV [LTR ]
ZOOM: 65% COPIES:001
LTR ->LTR [LTR ]
ZOOM:100% COPIES:001
2 Page Copy
(See page 34)
N in 1
(See page 32)
Erase
(See page 38)
Effects
(See page 40)
Double
Exposure
(See page 36)
2-Sided/Original
Copy
(See pages 26-31)
2-Sided Copy:
DP-8020E/8020P
only
Type of
Original
(See page 25)
Manual
Exposure
From
Platen only
●Toner Level Check Operation
When "CHECKING TONER PLEASE WAIT" message appears, the machine is checking the toner level and no
operation through control panel is accepted.
●Memory Full
If the memory overflows while scanning originals, the message “MEMORY FULL CONTINUE? 1:YES 2:NO”
will appear on the LCD. If this occurs, follow the instructions on the LCD.
If this occurs frequently, adding optional memory is recommended, consult with an authorized Panasonic dealer.

16
Getting To Know Your Machine
Misfed Paper
●Removing Misfed Paper (Paper Transport/Fusing Area) (J01, J30, J31, J33, J45, J48, J95)
REMOVE MISFED PAPER
J48
Left Cover
Misfed Paper
Lift Upward and Pull Out
Paper Tray
Jam Removal
Knob
Left Cover
Corona Cleaner
Toner Bottle (New)
Toner Waste Container
Front Cover
7
Operation Chart
■Problem Solving
●Removing Misfed Paper (Paper Exit Area) (J46)
●Replacing Toner Bottle/Toner Waste Container
12
REMOVE MISFED PAPER
J46
ATTENTION
●For optimum copy quality
use the recommended
Panasonic Toner. Store
Toner Bottle in a cool
dark place. Do not unseal
the Toner Bottle unless
you are ready to use it.
Shake it well
6
NOTE:
Do not reuse the toner from the
Toner Waste Container.
12
12
6
5
Slide the Corona Cleaner in and out 3 or
4 times slowly, then return the Corona
Cleaner Handle to original position.
(Ex.)
(Ex.)
ATTENTION
●Do not scratch or touch the
surface of the OPC Drum
(Green) with bare hands.
The OPC Drum is sensitive
to light. To prevent optical
exposure problems, do not
expose the OPC Drum to
direct sunlight or bright light.

17
Getting To Know
Your Machine
Toner Waste
Container (New)
Cap
Toner Waste Container
Paper Tray
Lift Upward and
insert the Tray
Left Cover
Heat Roller Cover
Jam Removal Knob
Misfed Paper
Left Cover
Misfed Paper
Corona Cleaner Handle
Toner Bottle (New)
Toner Bottle (New)
Toner Bottle (Empty)
4
6
3
5
8910
5
8
7
4
4
3
Close the Front Cover.
To
Release
To
Lock
3

18
Getting To Know Your Machine
Paper Tray
Misfed Paper
Feed Cover
ADF Tray
Exit Unit
Misfed Paper
ADF Cover
Misfed Paper
ADF Cover
Operation Chart
■Problem Solving
●Removing Misfed Paper (ADF: Option for DP-8020E/8020P/8016P) (J70, J71, J79, J92, J93)
12
REMOVE MISFED PAPER
J70
●Removing Misfed Paper (i-ADF: Option for DP-8020E) (J70, J71, J72, J73, J76, J78, J79, J92, J93)
REMOVE MISFED PAPER
J70
67
●Removing Misfed Paper (2nd/3rd/4th Paper Tray: Option)
(J02, J03, J04, J07, J08, J09, J12, J13, J14, J22, J23, J24)
REMOVE MISFED PAPER
J02
Feed Cover
Lift Upward
and insert
the Cover
12
67
12
(Ex.)
(Ex.)
(Ex.)

19
Getting To Know
Your Machine
Misfed Paper
Misfed Paper
Lift Upward and Pull Out
Paper Tray
1
2
Misfed Paper
Misfed Paper
Exit Unit
ADF Tray
ADF Cover
Misfed Paper
ADF
34
5
6
6
34
89
5
34
ADF Cover
10

20
Getting To Know Your Machine
Code Check Points
U20 ADF Cover is open.
U21 ADF/i-ADF was opened while scanning from
ADF/i-ADF.
U25 Toner hardened inside the Toner Bottle. Remove
the Toner Bottle and shake it well.
U90 Battery requires replacement.
(See page 80)
Misfed Paper
Left Cover
■Problem Solving
●Removing Misfed Paper (J19, J32, J82, J85, J87: ADU for DP-8020E only)
12
REMOVE MISFED PAPER
J82
EX.
Code Check Points
U01 Front and/or Left Cover is open.
U07 Feed Cover is open. (See page 18)
U13 Low Toner or Out of Toner.
U14 Toner Waste Container is full.
U15 Toner Waste Container is incorrectly installed.
U16 Developer Unit is incorrectly installed.
Call your Service Provider.
●User Error Codes (U Code)
U20
U21
U90
U01
U13
U14
U15
U16
U25
U07
Operation Chart