Panasonic KX-TCD340E User manual

–1 –
Please read the operating instructions for further details.
Controls
Handset
ASpeaker
BCharge contact
CDisplay
DSoft keys
E{C} (Talk)
FNavigator key
L{e}{v}: To search for the desired
item in menus.
L{>}: To select the desired item or
move the cursor to the right.
L{<}: To return to the previous
screen or move the cursor to the left.
G{s} (Speakerphone)
HDial keypad
LThe icons printed below the dial
keys shown in the illustration (g, d,
■etc.) indicate answering system
operations.
I{R}(Recall)
JReceiver
K{ih} (Off/Power)
L{C/T}(Clear/Mute)
M{INT}(Intercom)
NMicrophone
C
s
i
h
T
M
N
C
E
F
G
H
I
DK
J
L
B
A
N
a
HG
g
LN
gd
n
n
Digital Cordless Answering System
Model No. KX-TCD340E
Quick Guide
TCD340E_QG(e).fm Page 1 Monday, May 9, 2005 11:33 AM

–2 –
Base unit
ASpeaker
BCharge contact
CDisplay
D{Answer on}/Answer on indicator
E{d}(Greeting)
F{4}(Erase)
GNavigator key
L{>}{<}: To adjust the ringer and
speaker volumes.
L{<}{>}: To select the desired
ringtone or to repeat or skip the
recorded messages.
H{x} (Page)
I{R}(Recall)
J{R} (Redial/Pause)
K{T}(Mute)
LMicrophone
M{s} (Speakerphone)/Speakerphone
indicator
NIn use indicator
LLights when a handset is in use (on
a call, editing the shared
phonebook, using the answering
system, etc.).
LFlashes when a call is being
received or when the answering
system is answering a call.
O{5}(Play/Stop)
BC D
A
J
E F G
KL OMNIH
TCD340E_QG(e).fm Page 2 Monday, May 9, 2005 11:33 AM

–3 –
Displays
Handset display icons
Various icons appear on the handset display to indicate the current status of the unit.
Base unit display icons
Following icons appear on the base unit display to indicate the current status of the unit.
wWithin range of a base unit
LWhen flashing: Handset is
searching for base unit. (out
of range of base unit,
handset is not registered to
base unit, no power on base
unit)
xHandset is accessing base unit.
(intercom, paging, changing
base unit settings, etc.)
kHandset is on an outside call.
xCall bar is on.
yMissed call (Caller ID
subscribers only)
uAnswering system is on and/or
new messages have been
recorded.
nAnswering system is full.
dAnswering system will answer
calls with a greeting message
and caller message will not be
recorded.
iBatteries are charging.
1Battery strength
eAlarm is on.
dVoice enhancer is set to high
or low tone.
URinger volume is off.
fNight mode is on.
[2] Handset number: The left icon
shows handset 2 example.
-2- Base unit number: The left
icon shows base unit 2
example.
hNew SMS message received
(SMS users only)
jYour written SMS message is
over 160 characters. (SMS
users only)
mSMS memory is full. (SMS
users only)
{The base unit is on a call.
Another handset is on a call or
is using the answering
system.
dAnswering system will answer
calls with a greeting message
and caller message will not be
recorded.
URinger volume is off.
TCD340E_QG(e).fm Page 3 Monday, May 9, 2005 11:33 AM

–4 –
Handset menu icons
When in standby mode, pressing the middle soft key reveals the handset’s main menu. From
here you can access various features and settings.
Handset soft keys
Handset soft key icons
The handset features 3 soft keys. By pressing a soft key,
you can select the feature or operation indicated by the
soft key icon shown directly above it.
LPressing the left, middle, or right soft key selects the
leftmost, centre, or rightmost soft key icon
respectively.
LThe icons shown will vary depending on how you are
using the unit.
WCaller List
XSMS (Short Message Service)
uAnswer System
YHandset Setup
ZBase Unit Setup
aDisplay Setup
C
s
i
h
T
vReturns to the previous screen.
$Displays the menu.
,Accepts the current selection.
qDisplays a previously dialled phone
number.
UOpens the phonebook and switches
between handset phonebook and
shared phonebook.
rDisplays the phonebook search
menu.
"Turns the key lock feature off.
pDisplayed when adding or
editing a phonebook entry, or
when writing an SMS
message.
ZStops recording or playback.
sInserts a dialling pause.
wErases the selected item.
tDisplayed when the soft key
has no function.
TCD340E_QG(e).fm Page 4 Monday, May 9, 2005 11:33 AM

–5 –
Connections
When the AC adaptor is connected, a short beep will be heard. If it is not heard, check the
connections.
Battery installation
Insert the batteries negative (T) terminal first. Close the handset cover. Place the handset
on the base unit for about 7 hours before initial use.
Note:
LUse only rechargeable batteries.
Important:
LUse only the AC adaptor and telephone
line cord supplied with this unit.
Note:
LNever install telephone wiring during a
lightning storm.
LThe AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
(220–240 V, 50 Hz)
To telephone
network
Hook
TCD340E_QG(e).fm Page 5 Monday, May 9, 2005 11:33 AM

–6 –
Screen saver mode
Turning the power on
Press {ih} for about 1 second.
Setting the date and time
1Press $(middle soft key).
2Select Y, then press ,.
3Select “Time Settings”, then press ,.
4Select “Set Date & Time”, then press ,.
5Enter the current day, month and year by selecting 2 digits for each.
6Enter the current hour and minute by selecting 2 digits for each.
LYou can select “AM”, “PM”or 24-hour time entry by pressing {*} repeatedly.
7Press ,.
8Press {ih}.
Handset basic operations
The backlight will turn off completely after 1 minute
of inactivity if the handset is not on the base unit.
Only essential icons and the date and time will be
displayed, and they will occasionally change
position in order to preserve the life of the display.
To use the handset when it is in screen saver mode,
first press {ih} to turn the display on again.
Example:
Feature Operation
To turn the power off Press {ih} for about 2 seconds.
To make a call Dial the phone number, then press {C}.
To turn on the speakerphone Press {s}.
To hang up Press {ih}.
To adjust the receiver or speaker
volume
Press {e} or {v} while talking.
To redial the last number dialled Press q(right soft key), then press {C}.
To make a call using the redial list Press q(right soft key). Press {e} or {v}
repeatedly to select the desired number, then
press {C}.
To answer a call Press {C}.
To mute your voice during a call Press {C/T}. To return to the conversation, press
{C/T}again.
17 May 15:30
1
TCD340E_QG(e).fm Page 6 Monday, May 9, 2005 11:33 AM

–7 –
Base unit basic operations
To store a name and phone number
in the handset phonebook
Press U(left soft key), $, select “New
Entry”, then press ,.
Enter the party’s name (16 characters max.), then
press ,. Enter the party’s phone number (24
digits max.), then press ,. Select the desired
category for the entry, then press ,. Select
“Save”, then press ,. Press {ih}.
LTo enter a name, see the character table in the
operating instructions.
To make a call using the handset
phonebook
Press U(left soft key). Press {e} or {v}
repeatedly to display the desired entry, then press
{C}.
To adjust the handset ringer volume Press $(middle soft key). Select Y, then
press ,. Select “Ringer Setup”, then press
,. Select “Ringer Volume”, then press
,. Press {e} or {v} repeatedly to select the
desired volume. Press ,, then press {ih}.
To change the ringtone used by the
handset for outside calls
Press $(middle soft key). Select Y, then
press ,. Select “Ringer Setup”, then press
,. Select “Ext. Ringtone”, then press
,. Select the desired ringtone, then press
,. Press {ih}.
Feature Operation
To make a call Press {s}, then dial the phone number.
To hang up Press {s}.
To adjust the speaker volume Press {>}or {<}while talking.
To redial the last number dialled Press {s}, then press {R}.
To answer a call Press {s}.
To mute your voice during a call Press {T}. To return to the conversation, press
{T}again.
To adjust the base unit ringer
volume
Press {>}or {<}when a call is received or when
the base unit is in standby mode.
To change the ringtone used by the
base unit for outside calls
Press {>}or {<}when the base unit is in standby
mode. Press {<}or {>}repeatedly to select
the desired ringtone, then press {5}.
Feature Operation
TCD340E_QG(e).fm Page 7 Monday, May 9, 2005 11:33 AM

PQQW13631ZA DT0505DS0
Answering system
Sales and support information
Customer Care Centre
LFor customers within the UK: 08700 100 076
LFor customers within the Republic of Ireland: 01289 8333
LVisit our website for product information: www.panasonic.co.uk
LE-mail: [e-mail]
Direct Sales at Panasonic UK
LOrder accessory and consumable items for your product with ease and confidence by
phoning our Customer Care Centre Monday - Thursday 9:00am - 5:30pm, Friday 9:30am
- 5:30pm (Excluding public holidays).
LOr go on line through our Internet Accessory ordering application at
www.panasonic.co.uk
LMost major credit and debit cards accepted.
LAll enquiries transactions and distribution facilities are provided directly by Panasonic UK
Ltd.
LIt couldn’t be simpler!
LAlso available through our Internet is direct shopping for a wide range of finished products,
take a browse on our website for further details.
Feature Operation
To turn the answering system on/off Press {Answer on}.
To listen to new/all messages Press {5}.
Customer Care Helpline Tel. No.: U.K. 08700 100 076 / R.O.I. 01289 8333
TCD340E_QG(e).fm Page 8 Monday, May 9, 2005 11:33 AM