Panasonic KX-TCD820FX User manual

PQQW14867ZA DT0905DS0 FX-2/3
Digital Cordless Answering System
Model No. KX-TCD820FX
To use this product in Czech or Slovakia, change the unit’s region setting to match your
country.
Refer to “Changing the unit’s region settings” in the operating instructions.
1Connections
2Battery installation
Quick Guide
Hooks
Use only the included AC adaptor and
telephone line cord.
(220–240 V, 50 Hz)
To telephone network
Charge the batteries
for about 7 hours
before initial use.
TCD820FX_QG(e-e).fm Page 1 Monday, September 12, 2005 9:38 AM

–2 –
3Symbols used in this manual
Changing the display language
16 display languages are available.
You can select “Deutsch”, “English”, “Magyar”, “Polski”, “slovensky”,
“ČeŠtina”, “Hrvatski”, “Slovenscina”, “Eesti”, “LIETUVIŠKAI”, “LatvieŠu”,
“Românã”, “БЪЛГАРСКИ”, “Srpski”, “МАКЕДОНСКИ”, or “Shqiptar”.
1{ih} i"imi#
2Push the joystick down 3 times. i#
3Push the joystick down 3 times. i#
4Select the desired language. i#i{ih}
Setting dialling mode (tone/pulse)
1"(centre of joystick) ini#
2Enter the base unit PIN (default: “0000”).
3“Call Options”i#
4“Dial Mode”i#
5Select the desired setting. i#i{ih}
Symbol Meaning
"Press "(centre of joystick).
iProceed to the next operation.
#Press #(centre of joystick).
jSelect j(caller list menu icon).
kSelect k(SMS settings menu icon).
lSelect l(answering system settings menu icon).
mSelect m(handset settings menu icon).
nSelect n(base unit settings menu icon).
oSelect o(infrared menu icon).
“ ” Example: “Time Settings”
Push the joystick up or down to select the words in quotations shown on
the display.
TCD820FX_QG(e-e).fm Page 2 Monday, September 12, 2005 9:38 AM

–3 –
Setting the date and time
4Basic operations
1"(centre of joystick) imi#
2“Time Settings”i#
3“Set Date & Time”i#
4Enter the current day, month and year.
5Enter the current hour and minute.
6#i{ih}
Feature Operation
Making a call Dial the phone number. i{C}/{s}
Answering a call {C}
Hanging up {ih}
Receiver/speaker volume Push the joystick up or down while on a call.
Last number redial B(right soft key) i{C}
Making a call with redial list B(right soft key) iPush the joystick up or down
to select the desired number. i{C}
Handset phonebook: storing an
entry (name, phone numbers,
picture)
A(left soft key) i"i“New Entry”i
#i“Name”i#iEnter the party’s name
(16 characters max.). i#i“Phone No. 1”
i#iEnter the party’s phone number (24 digits
max.). i#i“Picture”i#i
“Preset Pictures”or “User Pictures”i#
iPush the joystick up or down to select the desired
picture. i#i“Category 1”i#i
Select the desired category. i#i“<Save>”
i#i{ih}
LYou can store up to 3 phone numbers for each entry.
LTo enter a name, see the character table in the
operating instructions.
Handset phonebook: making a
call
A(left soft key) iPush the joystick up or down to
display the desired entry. i{C}
LIf more than 1 phone number is assigned to the
entry, press {C}/y. iSelect the desired
phone number. i{C}
{ih}
"/#
R
TCD820FX_QG(e-e).fm Page 3 Monday, September 12, 2005 9:38 AM

–4 –
Answering system
5Frequently asked questions
Handset ringer volume "(centre of joystick) imi#i“Ringer
Setup”i#i“Ringer Volume”i#
iPush the joystick up or down to select the desired
volume. i#i{ih}
Changing ringtone
(outside calls)
"(centre of joystick) imi#i“Ringer
Setup”i#i“Ext. Ringtone”i#
i“Preset Ringtones”or “User Ringtones”
i#iSelect the desired ringtone. i#i
{ih}
Feature Operation
Answering on/off "(centre of joystick) ili#iai
{ih}
Listening to messages "(centre of joystick) ili#i“Play
New Msg.”or “Play All Msg.”i#
Question Cause & solution
What kind of power outlet
should I connect the AC
adaptor to?
Connect the AC adaptor to a 220–240 V outlet.
Why is wflashing? LThe handset is too far from the base unit. Move closer.
LThe AC adaptor is not connected. Check the
connections.
LThe handset is not registered to the base unit. Register it.
"(centre of joystick) imi#i
“Registration”i#i“Register H.set”i
#iSelect a base unit number. i#iPress
and hold {x} on the base unit for about 3 seconds, until the
registration tone sounds. iWait until “Enter Base
PIN”is displayed. iEnter the base unit PIN (default:
“0000”). i#
Why can I not make calls? The dialling mode setting is incorrect. Set to “Tone”or
“Pulse”as needed.
Why is the handset display
blank?
The handset is not turned on. To turn the power on, press
{ih} until a short beep sounds.
What should I do when the
handset does not turn on?
LMake sure that the batteries are installed correctly.
LFully charge the batteries.
LClean the charge contacts and charge again.
Feature Operation
TCD820FX_QG(e-e).fm Page 4 Monday, September 12, 2005 9:38 AM

–5 –
6To use Caller ID and SMS (optional services)
If you subscribe to Caller ID service, you can:
How long should I charge new
batteries?
Charge the batteries for about 7 hours.
How long is the battery
operating time?
When you are using fully-charged Ni-MH batteries;
Talking: 14 hours max.
Standby: 150 hours max.
LBattery operating time may be shortened over time
depending on usage conditions and ambient
temperature.
When should I replace the
batteries?
If the batteries are fully charged until
! is displayed, but #
is displayed after a few calls, replace the batteries with new
ones.
What is a PIN? The PIN is a 4-digit number that must be entered in order
to change certain handset and base unit settings. The
default PIN for both the handset and base unit is “0000”.
What do I need to do to
display caller information?
You need to subscribe to Caller ID service. Consult your
service provider for details.
– display caller information
– identify who is calling by using different display colours and ringtones
(handset phonebook category)
– identify who is calling without looking at the display (audible call)
To use SMS, you must subscribe to Caller ID and/or appropriate service.
SMS (Short Message Service)
Question Cause & solution
Ann
012345
Ann
012345
Ann
TCD820FX_QG(e-e).fm Page 5 Monday, September 12, 2005 9:38 AM

TCD820FX_QG(e-e).fm Page 6 Monday, September 12, 2005 9:38 AM