Panasonic DMWSDP1 - HD SD CARD PLAYER User manual

LSQT1098 A
For USA assistance, please call: 1-800-272-7033 or send e-mail to : [email protected]
PP
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
Operating Instructions
HDTV Photo Player
Model No.DMW-SDP1
Before connecting, operating or
adjusting this product, please read
the instructions completely.

2
LSQT1098
Before Use
Before Use
Dear Customer,
We would like to take this opportunity to
thank you for purchasing this Panasonic
HDTV Photo Player. Please read these
Operating Instructions carefully and keep
them handy for future reference.
Information for Your
Safety
WARNING
TO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES
AND DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE THE
COVER (OR BACK);THERE ARE
NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
AC adaptor
This AC adaptor operates on AC between
110 V and 240 V.
But
• In the U.S.A. and Canada, the AC
adaptor must be connected to a 120 V
AC power supply only.
• When connecting to an AC supply
outside of the U.S.A. or Canada, use
a plug adaptor to suit the AC outlet
conguration.
• Please note that the actual controls
and components, menu items, etc.
of your HDTV Photo Player may look
somewhat different from those shown
in the illustrations in these Operating
Instructions.
• SDHC logo is a trademark.
• Other names, company names,
and product names printed in these
instructions are trademarks or registered
trademarks of the companies concerned.
CAUTION
Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to
the manufacturer’s instructions.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
-If you see this symbol-
Information on Disposal in other
Countries outside the European
Union
This symbol is only valid
in the European Union.
If you wish to discard this
product, please contact
your local authorities
or dealer and ask for
the correct method of
disposal.
Be sure to use a Panasonic CR2025
battery as a replacement battery.

Before Use
3
LSQT1098
Before Use
THE FOLLOWING APPLIES ONLY IN THE
U.S.A.
FCC Note:
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
FCC Caution: To assure continued
compliance, follow the attached
installation instructions and use
only shielded interface cables when
connecting to peripheral devices.
Any changes or modifications not
expressly approved by the party
responsible for compliance could void the
user’s authority to operate this equipment.
•
•
•
•
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference,
and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMW-SDP1
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics
Company
Telephone No.: 1-800-272-7033
Marking sign is located on bottom of the
unit.
This Class B digital apparatus complies
with Canadian ICES-003.
This unit is provided with a CSA/UL
approved Class 2 limited power supply
with detachable ouput cable.

4
LSQT1098
Before Use
About illustrations in these operating
instructions
Please note that the appearance of the
product, the illustration or the menu screen
are a little different from those in actual use.
Convenient or useful information for use of
this unit is described.
nAbout illustrations of the cursor
button
In those operating instructions, the
operations on the cursor button are
described as illustrated below.
For example: Pressing the r
cursor button
The cursor button of the Remote control is
illustrated above. You can use the cursor
button of the main unit in the same way.
MENU
SET

5
LSQT1098
Contents
Before use
Information for Your Safety....................... 2
About illustrations in these operating
instructions............................................. 4
Preparation
Standard Accessories............................... 6
Names of the Components....................... 7
The Remote Control ................................. 9
Connecting to HDTV .............................. 10
Inserting/Removing the Card (Optional). 11
About the Card ....................................... 12
Playback/Menu
Playing Back Pictures............................. 13
Displaying Multiple Screens
(Multi Playback) ................................... 14
Displaying pictures by recording date
(Calendar playback)............................. 15
Using the Playback Zoom....................... 16
Playing Back Pictures with Audio/Motion
pictures ................................................ 17
Deleting Pictures .................................... 18
Using the [PLAY] menu .......................... 20
• [SLIDE SHOW]
Playing back pictures in order for a xed
duration .............................................. 21
• [FAVORITE]
Setting your favorite pictures.............. 22
• [ROTATE DISP.]/[ROTATE]
To display the picture rotated............. 23
• [DPOF PRINT]
Setting the Picture to be Printed and the
Number of Prints ................................ 25
• [PROTECT]............................................
Preventing Accidental Erasure of the
Picture................................................ 27
• [FORMAT]
Initializing a card ................................ 28
Settings................................................... 29
Connecting to other equipment
Connecting to a PC ................................ 31
Connecting to a PictBridge-compliant
Printer .................................................. 33
Others
Message Display .................................... 37
Troubleshooting...................................... 38
Cautions for Use..................................... 40
Specications ......................................... 41
Limited Warranty (For USA Only)........... 42
Customer Services Directory
(For USA Only) .................................... 44
Limited Warranty (For Canada).............. 45
Spanish Quick Use Guide/Guía rápida en
español ................................................ 47

Preparation
6
LSQT1098
Preparation
Standard Accessories
Before using your player, check the contents.
nAC adaptor
VSK0626-2
nComponent video cables
K2KA6CA00004
nRemote control
N2QACC000010 and
Button-type battery
DISPLAY
SINGLE MULTI CALENDAR
SLIDE SHOW
MENU
SET
PLAY
Card is optional.
• If any of the accessories are lost, please
contact Panasonic’s parts department at
1 800 833-9626 (For USA) or in Canada
call 1 800 561-5505 for more details on
how to obtain replacement parts.
•

Preparation
Preparation
7
LSQT1098
Names of the Components
Power button (P13)
Operation lamp (Lights green when the
unit is on, ashes when communicating
with a computer (P31))
Cursor button (P13, 20)
[MENU/SET] button (P20, 29)
Remote Control sensor
Card slot (P11)
1.
2.
3.
4.
5.
6.
[ANALOG COMPONENT] terminals
(P10)
[AUDIO OUT] terminal (P10)
[USB] terminal (P31, 33)
[DC IN 4.8V] terminal (P10)
7.
8.
9.
10.
AUDIO OUT
DC IN 4.8V
USB
ANALOG COMPONENT
1 2 3 4
6
78
910
5
Always use a genuine Panasonic AC
adaptor.
•

Preparation
8
LSQT1098
Preparation
POWER button (P13)
[SLIDE SHOW] button (P21)
[SINGLE] button (P14)
[MULTI] button (P14)
[DISPLAY] button (P13)
Zoom button (P14, 15, 16)
[CALENDAR] button (P15)
Delete button (P14, 18)
Cursor buttons (P13, 20)
[MENU/SET] button (P20, 29)
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
DISPLAY
SINGLE MULTI CALENDAR
SLIDE SHOW
MENU
SET
PLAY
11
12
13
14
15
16
17
18
19
20

Preparation
Preparation
9
LSQT1098
The Remote Control
Push the catch in the direction
shown by arrow (1) to remove the
holder.
Insert the battery with the (+)
marked side facing up.
Return the holder to its original
position.
1�
2�
3�
When the battery (CR2025) has run out,
replace it with a new one. (The battery
lasts about one year, depending on the
frequency of use.)
If the remote control unit fails to work
even when it is operated near the remote
control sensor, the battery has run out.
Be sure to use a Panasonic CR2025
battery as a replacement battery.
Button-type battery (Lithium battery)
Insert with the poles aligned.
Do not touch the terminals (+ and -) with
metal objects.
Do not recharge, disassemble, remodel,
heat or throw into re.
Keep out of reach of children.
If any electrolyte should come into contact
with your hands or clothes, wash it off
thoroughly with water. If any electrolyte
should come into contact with your eyes,
never rub the eyes. Rinse eyes thoroughly
with water, and then consult a doctor.
•
•
•
•
•
•
•
Warning
Risk of re, explosion and burns. Do not
recharge, disassemble, heat above 100°C
(212°F) or incinerate.

Preparation
10
LSQT1098
Preparation
Connect the component video
cables to the COMPONENT IN
terminals of the TV.
To enjoy sound, connect the Monaural
sound cable (optional) as illustrated on
the left.
Connect AC adaptor (supplied) to
[DC IN 4.8V] terminal and to the
household AC socket.
Turn the TV on and select
the COMPONENT input
corresponding to the terminals
you have connected this unit to.
Do not use any other component video
cables except the supplied one.
Read the TV operating instructions too.
The top and bottom or left and right of
the picture may be cut off slightly when it
is displayed due to the characteristics of
the TV.
Depending on the screen mode setting
of the TV, the picture may be stretched
horizontally or vertically and the top and
bottom and or left and right of the picture
may be cut off when it is displayed. In this
case, change the screen mode setting.
Audio playback is in monaural.
Pictures might be slightly blurred if you
show them vertically on a television.
nTV Aspect setting
Depending on the type of televisions
connected, setting TV Aspect may be
necessary. (P30)
2�
•
3�
4�
•
•
•
•
•
•
Connecting to HDTV
Turn the unit and the TV off.
Connect the component video
cables (supplied) to the [ANALOG
COMPONENT] terminals of the
unit.
Connect each cable (Y, Cb, Cr) to the
corresponding terminals respectively.
•
1�
•
AUDIO OUT
DCIN 4.8V
USB
ANALOG COMPONENT
2
1
3
To AUDIO IN
terminal
To COMPONENT
IN terminals
Component
video cables
(supplied)
To enjoy sound.
Audio cable (optional)
AC adaptor
(supplied)
To household
AC socket