Panasonic PPDW12 Operation manual

Camera Housings & Mounting Hardware
PRODUCT FEATURES
110
®
7
PPDW12
Pressurized
Dome Camera
Housing
PRODUCT FEATURES
• Pressurized camera housing for
Panasonic unitized dome cameras
• Constructed of aluminum, UV stable
ABS plastic, stainless steel and acrylic
• Pressurized to 5 psi
• Schraeder valve
• Relief valve
• Pressurized indicator
• Multi-pin sealed connector
• 50W heater turns on at 40°F and off at
60°F
• Power and video surge protector
• Wall mount included
• Weighs 18.5 lbs. (without camera)
• 14.9"H x 18.09"W x 18.25"D
The PPDW12 pressurized dome housing
is sealed and charged with dry nitrogen.
The nitrogen charge provides maximum
protection from moisture, dust and
insects, elements that normally would
cause costly deterioration of video
components in other housings.

Camera Housings & Mounting Hardware 111
TECHNICAL SPECIFICATIONS ®
7
The outdoor pressurized dome camera housing shall be a Panasonic model PPDW12 or equivalent. The housing
shall be designed for the Unitized Surveillance Device Series WV-CS654/CS404/BS304/BS504. The housing shall
be capable of withstanding a total of 5 psi of nitrogen gas injected through a Schraeder valve located on the 3⁄8"
machined aluminum retaining ring. A pressure relief valve located next to the Schraeder valve will provide an
escape for pressure exceeding 5 psi. Two (2) o-ring seals shall be included, 0.136" x 12" (inner diameter) and
0.136" x 15" (inner diameter). A 10-pin hermetically sealed connector, located in the back of the pressurized
housing shall provide power, video and control functions. A stainless steel retaining cable will be used to
capture and hold the housing’s aluminum top during service. The housing shall be constructed of 0.090"
aluminum, UV stable ABS plastic, stainless steel and acrylic. The lower dome portion shall be constructed of
distortion-free cast acrylic (free blown) and be 12" in diameter. The housing shall include an integral 10-gauge
powder coated steel wall mount bracket. The housing shall include a camera mounting bracket that integrates a
heater, blower, video and power surge protector capable of clamping differential mode voltage between 24-36V
and common mode voltage from 54-72V. The housing shall be powered with 24VAC (60Hz) and have a power
consumption not to exceed 68W including Unitized Camera. The blower shall draw 1.4W continuous power. The
50W heater shall turn on at 40°F and turn off at 60°F. A ground isolation transformer, Panasonic model
PWBT1621, shall be available as an option . The housing shall support a temperature range of 20° to 120°F. The
unit shall have a weight not to exceed 18.5 lbs. (without camera) and dimensions of 14.9"H x 18.09"W x 18.25"D.
PPDW12 Pressurized Dome
Camera Housing
GENERAL SPECIFICATIONS
Construction Pressurized enclosure
anodized aluminum
Top 0.090" 3003 aluminum
Dome Cell cast acrylic
Wall Mount Bracket 10-gauge powder coated
steel
Sunshield ABS plastic UV stable
Seals 2 o-rings: 0.136" x 12" (ID)
and 0.136" x 15" (ID); 2 types
of material
Pressure Relief Valve 5 psi
Schraeder Valve Nitrogen input
Power Connector 10-pin Souriau, hermetically
sealed
Power Source 24VAC, 60Hz
Power Consumption 68W
Dimensions 14.9"H x 18.09"W x 18.25"D
Weight 18.5 lbs.
Weights and dimensions shown are approximate.
Specifications subject to change without notice.
ARCHITECTS’ AND ENGINEERS’ BID SPECIFICATIONS

Camera Housings & Mounting Hardware
86
®
7
1/2" CCD B/W SC, 420 TVL, 0.5 lux at f/1.4
Camera Package, 1/3" CCD B/W, 380 TVL, 0.1 lux at f/1.2 Camera, 1/3" CCD B/W, 380 TVL, 0.06 lux at f/1.2, w/o LL, 12VDC Camera, 1/3" CCD B/W, 380 TVL, 0.06 lux at f/1.2, LL, 24 VAC Camera, 1/3" CCD B/W DSP, 570 TVL, 0.06 lux at f/1.2, LL, 120VAC Camera, 1/3" CCD B/W DSP, 570 TVL, 0.06 lux at f/1.2, w/o LL, 12VDC Camera, 1/3" CCD B/W DSP, 570 TVL, 0.06 lux at f/1.2, LL, 24VAC
Camera, 1/3" SD CCD B/W DSP, 570 TVL, 0.06 lux at f/1.2, LL, 120VAC
Camera, 1/3" SD CCD B/W DSP, 570 TVL, 0.06 lux at f/1.2, LL, 24VAC/12VDC Camera, 1/2" FIT CCD B/W, 570 TVL, 0.08 lux at f/1.4, 120VAC Camera, 1/2" FIT CCD B/W, 570 TVL, 0.08 lux at f/1.4, 24VAC/12VDC Unitized Camera Device, 1/3" B/W, 570 TVL, 0.08 lux at f/1.2, 24VAC Unitized Camera Device, 1/3" B/W w/presets, 500 TVL, 0.08 lux at f/1.2, 24VAC
Unitized Camera Device, 1/3" B/W w/presets, 500 TVL, 0.2 lux at f/1.7, 24VAC Mini-Dome w/ 1/3" SD Color Camera, 3.2-6.4mm Lens, 480 TVL
Mini-Dome w/ 1/3" Manual 2X Lens (3.2-6.4mm), 8 lux at f/1.6, 430 TVL Camera, 1/3" SD DSP Color, SC, 480 TVL, 2 lux at f/1.2, w/Audio
Camera, 1/3" CCD Color DSP, 480 TVL, 2 lux at f/1.4, LL, 120VAC
Camera, 1/3" CCD Color DSP, 480 TVL, 2 lux at f/1.4, w/o LL, 12VDC Camera, 1/3" CCD Color DSP, 480 TVL, 2 lux at f/1.4, LL, 24VAC Camera, 1/3" SD CCD Color DSP, 480 TVL, 2 lux at f/1.2, LL, 120VAC Camera, 1/3" SD CCD Color DSP, 480 TVL, 2 lux at f/1.2, LL, 24VAC/12VDC
Camera, 1/3" SD CCD Color DSP, 480 TVL, 2 lux at f/1.2, LL, 120VAC
Camera, 1/3" SD CCD Color DSP, 480 TVL, 2 lux at f/1.2, LL, 24VAC,12VDC Camera, 1/2" FIT CCD Color, 480 TVL, 2 lux at f/1.4, 120VAC Camera, 1/2" FIT CCD Color, 480 TVL, 2 lux at f/1.4, 24VAC/12VDC
HOUSINGS
PDM5 Bracket, Drop Ceiling Mount, f/WV-CS654/404/BS504/304 Series ■■■❑
PHM5 Bracket, Hanging Mount f/WV-CS654/404/BS504/304 Series ■■■❑
PWM5 Bracket, Wall Mount, f/WV-CS654/404/BS504/304 Series ■■■❑
POD7CW Dome Housing, Outdoor, 7", Wall Mount, f/Unitized Cameras ■■■❑
PCA2B Corner Mount Adaptor f/PWM9000B Bracket, Black ◆◆◆❑
PPM3B Pole Mount Adaptor f/PWM9000B Brackets, Black ◆◆◆❑
PSRCW2000B Bracket, Rooftop Parapet Mount, HD, Black ◆◆◆❑
POD7C Dome Housing, Outdoor, 7", Pendant Mount, f/Unitized Cameras ■■■❑
PPDW12 Dome Housing, Pressurized, Outdoor, f/Unitized Cameras ■■■❑
POH1000 Camera Housing, Outdoor ❍❍ ❍❍❍❍❍❍❍❍❍ ❍❍❍❍❍❍❍❍❍❍
WV-831P Bracket, Wall f/WV-7130D/POH1000/POH1500 Housings
POH1000HB Camera Housing, POH1000 w/Heater and Blower ❍❍ ❍❍❍❍❍❍❍❍❍ ❍❍❍❍❍❍❍❍❍❍
P9000HW Bracket, Outdoor Swivel Head, Wall Mount
P9000HC Bracket, Outdoor Swivel Head, Corner Mount
P9000HP Bracket, Outdoor Swivel Head, Pole Mount
POH1500 Camera Housing, Longer Version of POH1000 •• ••••••••• ••••••••••
WV-831P Bracket, Wall f/WV-7130D/POH1000/POH1500 Housings
POH1500HB Camera Housing, POH1500 w/Heater and Blower •• ••••••••• ••••••••••
P9000HW Bracket, Outdoor Swivel Head, Wall Mount
P9000HC Bracket, Outdoor Swivel Head, Corner Mount
P9000HP Bracket, Outdoor Swivel Head, Pole Mount
PRC201C Low Profile Recessed Ceiling Housing ❍❍ ❍❍❍❍❍❍❍❍❍ ❍❍❍❍❍❍❍❍❍❍
WV-40 Housing, Dust Proof, f/WV-BL90A ❍ ❍
WV-46/KT Housing, Drip Proof, w/HB f/WV-BL90A ❍ ❍
WV-7110A Housing, Indoor, for 1/3" CCD B/W and Color CAMS ❍ ❍❍❍❍❍❍❍❍❍ ❍❍❍❍❍❍❍❍❍❍
WV-831P Bracket, Wall f/WV-7130D/POH1000/POH1500 Housings
WV-7120D Housing, Indoor, for Cameras w/Fixed Lenses ❍❍ ❍❍❍❍❍❍❍❍❍ ❍❍❍❍❍❍❍❍❍❍
WV-831P Bracket, Wall f/WV-7130D/POH1000/POH1500 Housings
WV-7130D Housing, Indoor f/CCD CAMS w/Zoom Lenses •• ••••••••• ••••••••••
Camera, 1/3" CCD B/W, 380 TVL, 0.06 lux at f/1.2, LL, 120VAC
❍
❍
•
•
❍
❍
❍
•
Unitized Camera Device, 1/3" Color DSP, 480 TVL, 3 lux at f/1.2, 24VAC
■
■
■
■
◆
◆
◆
■
■
Unitized Camera Device, 1/3" SD CCD Color DSP w/Presets, 2 lux at f/1.2, 24VAC
■
■
■
■
◆
◆
◆
■
■
Unitized Camera Device, 1/4" Color DSP w/Presets, 480 TVL, 6 lux at f/1.7, 24VAC, ER
■
■
■
■
◆
◆
◆
■
■
WV-CS404 WV-CS654
WV-CST604
WV-BL90A WV-BP70
WV-BP132 WV-BP134 WV-BP330 WV-BP332 WV-BP334 WV-BP550 WV-BP554 WV-BL730 WV-BL734 WV-BS304 WV-BS504 WV-BST504 WV-CF254 WV-CF20 WV-CP150 WV-CP230 WV-CP232 WV-CP234 WV-CP450 WV-CP454 WV-CP650 WV-CP654 WV-CL830 WV-CL834 WV-BP130
CAMERA/HOUSING
COMPATIBILITY CHART
Legend
■Compatible
❍Compatible with listed Panasonic
camera with Panasonic fixed and
varifocal lens
•Compatible with listed Panasonic
camera with Panasonic fixed or
zoom lens
❑Contact Panasonic Sales
Engineering for compatibility
(tel. [phone])
◆Accessory for POD7CW Wall Mount
Housing for Unitized Cameras
■Accessory for housing listed
above model #
CAMERAS
BLACK & WHITE COLOR