Panasonic RCDC1 - IPOD/IPHONE ALARM CLOCK User manual

RQTX1210-1B
Note:
“EB” on the packaging indicates the United Kingdom.
EB
Operating Instructions
Clock Radio
Model No. RC-DC1
RQTX1210-1B_gb.indd 1RQTX1210-1B_gb.indd 1 6/15/2010 10:24:26 AM6/15/2010 10:24:26 AM

RQTX1210
2
2
CAUTION!
• DO NOT INSTALL OR PLACE THIS
UNIT IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER CONFINED
SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF
ELECTRIC SHOCK OR FIRE HAZARD
DUE TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.
• DO NOT OBSTRUCT THE UNIT’S
VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
• DO NOT PLACE SOURCES OF NAKED
FLAMES, SUCH AS LIGHTED CANDLES,
ON THE UNIT.
• DISPOSE OF BATTERIES IN AN
ENVIRONMENTALLY FRIENDLY
MANNER.
Dear Customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions thoroughly before connecting,
operating or adjusting this product.
Keep this manual for future reference.
THIS UNIT IS INTENDED FOR USE IN
MODERATE CLIMATES.
WARNING:
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR PRODUCT
DAMAGE,
• DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE
APPARATUS.
• USE ONLY THE RECOMMENDED
ACCESSORIES.
• DO NOT REMOVE THE COVER
(OR BACK); THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RQTX1210-1B_gb.indd 2RQTX1210-1B_gb.indd 2 6/15/2010 10:24:26 AM6/15/2010 10:24:26 AM

RQTX1210
3
3
The socket outlet shall be installed near the
equipment and easily accessible.
The mains plug of the power supply cord shall
remain readily operable.
To completely disconnect this apparatus from
the AC Mains, disconnect the power supply
cord plug from AC receptacle.
This product may receive radio interference
caused by mobile telephones during use. If
such interference is apparent, please increase
separation between the product and the
mobile telephone.
Product identification marking
Product Location
Main unit Bottom
AC adaptor Bottom
■Sales and Support Information
Customer Care Centre
• For customers within the UK:
0844 844 3852
• For customers within the Republic of
Ireland: 01 289 8333
• Visit our website for product information
www.panasonic.co.uk
• E-mail: [e-mail]
Direct Sales at Panasonic UK
• For customers: 0844 844 3856
• Order accessory and consumable items
for your product with ease and confidence
by phoning our Customer Care Centre
Monday-Thursday 9:00am-5:30pm,
Friday 9:30am-5:30pm (Excluding public
holidays).
• Or go on line through our Internet
Accessory ordering application at
www.pas-europe.com.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution
facilities are provided directly by
Panasonic UK Ltd.
• It couldn’t be simpler!
• Also available through our Internet is direct
shopping for a wide range of finished
products, take a browse on our website for
further details.
RQTX1210-1B_gb.indd 3RQTX1210-1B_gb.indd 3 6/15/2010 10:24:26 AM6/15/2010 10:24:26 AM

RQTX1210
4
4
Information for Users on Collection and
Disposal of Old Equipment and used Batteries
These symbols on the products,
packaging, and/or accompanying
documents mean that used electrical
and electronic products and
batteries should not be mixed with
general household waste.
For proper treatment, recovery
and recycling of old products and
used batteries, please take them
to applicable collection points,
in accordance with your national
legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products and
batteries correctly, you will help to
save valuable resources and prevent
any potential negative effects on
human health and the environment
which could otherwise arise from
inappropriate waste handling.
For more information about
collection and recycling of old
products and batteries, please
contact your local municipality, your
waste disposal service or the point
of sale where you purchased the
items.
Penalties may be applicable for
incorrect disposal of this waste, in
accordance with national legislation.
For business users in the
European Union
If you wish to discard electrical and
electronic equipment, please contact
your dealer or supplier for further
information.
[Information on Disposal in other
Countries outside the European
Union]
These symbols are only valid in
the European Union. If you wish to
discard these items, please contact
your local authorities or dealer
and ask for the correct method of
disposal.
Note for the battery symbol
(bottom two symbol examples):
This symbol might be used in
combination with a chemical symbol.
In this case it complies with the
requirement set by the Directive for
the chemical involved.
RQTX1210-1B_gb.indd 4RQTX1210-1B_gb.indd 4 6/15/2010 10:24:26 AM6/15/2010 10:24:26 AM

RQTX1210
5
5
Foreign matter
Do not let metal objects fall inside the unit. This
can cause electric shock or malfunction.
Do not let liquids get into the unit. This can
cause electric shock or malfunction. If this
occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit.
They contain flammable gases which can ignite
if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself.
If sound is interrupted, indicators fail to light,
smoke appears, or any other problem that
is not covered in these instructions occurs,
disconnect the AC adaptor and contact your
dealer or an authorised service centre. Electric
shock or damage to the unit can occur if the unit
is repaired, disassembled or reconstructed by
unqualified persons.
Extend operating life by disconnecting the unit
from the power source if it is not to be used for a
long time.
Safety precautions
Placement
Set the unit up on an even surface away from
direct sunlight, high temperatures, high humidity,
and excessive vibration. These conditions can
damage the cabinet and other components,
thereby shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces
to avoid distortion and unwanted acoustical
effects.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can
overload the unit and cause a fire.
Do not use a DC power source. Check the
source carefully when setting the unit up on a
ship or other places where DC is used.
AC adaptor protection
Ensure the AC adaptor is connected correctly
and not damaged. Poor connection and lead
damage can cause fire or electric shock. Do not
pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the
adaptor. Pulling the AC adaptor can cause
electric shock.
Do not handle the plug with wet hands. This can
cause electric shock.
RQTX1210-1B_gb.indd 5RQTX1210-1B_gb.indd 5 6/15/2010 10:24:26 AM6/15/2010 10:24:26 AM

RQTX1210
6
6
Table of contents
Safety precautions ............................................5
Supplied accessories........................................6
Compatible iPod and iPhone............................7
Overview of controls .........................................8
Making the connections..................................10
Setting the clock..............................................10
Using an iPod or iPhone .................................11
Using the radio ................................................12
Using the sleep timer ......................................13
Using the alarm................................................13
Using the Memory Loader application ..........15
Memory back-up battery.................................16
Troubleshooting guide ....................................17
Maintenance.....................................................18
Specifications ..................................................19
Supplied accessories
Please check and identify the
supplied accessories.
1 AC adaptor
(RFEAX1008)
RQTX1210-1B_gb.indd 6RQTX1210-1B_gb.indd 6 6/15/2010 10:24:26 AM6/15/2010 10:24:26 AM

RQTX1210
7
7
Compatible iPod and iPhone
• iPod nano 5th generation (video camera)
(8GB, 16GB)
• iPod touch 2nd generation
(8GB, 16GB, 32GB, 64GB)
• iPod classic [120GB, 160GB (2009)]
• iPod nano 4th generation (video) (8GB, 16GB)
• iPod classic (160GB) (2007)
• iPod touch 1st generation (8GB, 16GB, 32GB)
• iPod nano 3rd generation (video) (4GB, 8GB)
• iPod classic (80GB)
• iPod nano 2nd generation (aluminum)
(2GB, 4GB, 8GB)
• iPod 5th generation (video) (60GB, 80GB)
• iPod 5th generation (video) (30GB)
• iPod nano 1st generation (1GB, 2GB, 4GB)
• iPod 4th generation (colour display)
(40GB, 60GB)
• iPod 4th generation (colour display)
(20GB, 30GB)
• iPod 4th generation (40GB)
• iPod 4th generation (20GB)
• iPod mini (4GB, 6GB)
• iPhone 3GS (16GB, 32GB)
• iPhone 3G (8GB, 16GB)
• iPhone (4GB, 8GB, 16GB)
Compatibility depends on the software version
of your iPod or iPhone.
“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has been
designed to connect specifically to iPod, or
iPhone, respectively, and has been certified
by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
RQTX1210-1B_gb.indd 7RQTX1210-1B_gb.indd 7 6/15/2010 10:24:26 AM6/15/2010 10:24:26 AM

RQTX1210
8
8
Overview of controls
A
B
C
D
E
F
G
H
I
J
RQTX1210-1B_gb.indd 8RQTX1210-1B_gb.indd 8 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
9
9
A [SNOOZE/DIMMER]
Snooze: To stop the alarm for 9 minutes.
Dimmer: To adjust the display panel’s
brightness (High (default), Medium or Low).
B [ALARM OFF]
To turn off the alarm.
C [ALARM 1], [ALARM 2]
To activate either alarm 1 or alarm 2 function.
To display alarm 1 or alarm 2 setting.
D [SLEEP]
To activate sleep function.
To activate daylight saving time
(summer time) in clock mode.
E [2/–, ADJ], [+/6, ADJ]
To adjust clock, radio and alarm settings.
To skip to previous or next track.
To backward or forward search through a
track.
F [SET/PRESET]
To set the clock.
To perform automatic presetting or to view
preset channels in radio mode.
G [TIME SYNC]
To synchronise the main unit with an iPod or
iPhone’s time.
H [+, VOL], [–, VOL]
To adjust the volume.
To select a 12-hour or 24-hour clock display.
I [ 4/9 ]
To start music playback from an iPod or
iPhone and to pause during playback.
J [SOURCE]
To select clock, “IPOD” or “RADIO FM”
mode.
RQTX1210-1B_gb.indd 9RQTX1210-1B_gb.indd 9 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
10
10
Making the connections
Rear view
To household
mains socket
FM indoor
antenna
Connect the AC adaptor.
• Do not use an AC adaptor from other
equipment.
• Do not use any other AC adaptors except the
supplied one.
• The unit is in the standby condition when the
AC adaptor is connected. The primary circuit
is always “live” as long as the AC adaptor is
connected to an electrical outlet.
Setting the clock
The clock is displayed once the main unit is
connected to the household mains socket.
Reset the clock regularly to maintain accuracy
(monthly accuracy +/– 60 seconds).
1 Press and hold [SET/PRESET] for 2
seconds.
2 Press [2/–, ADJ] or [+/6, ADJ] to
select the day.
3 Press [SET/PRESET] again to confirm.
4 Repeat steps 2 and 3 to set the hour and
minute.
Example:
To change the clock display
In clock mode, press and hold [+, VOL] and
[–, VOL] at the same time for 2 seconds to select
between a 12-hour or 24-hour display.
For 12-hour display:
AM : “PM” is not displayed.
PM : “PM” is displayed.
RQTX1210-1B_gb.indd 10RQTX1210-1B_gb.indd 10 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
11
11
Daylight saving time (summer time)
In clock mode, press and hold [SLEEP] to
activate or cancel daylight saving time (summer
time) function.
“DST” is displayed when the function is
activated.
Synchronising clock with iPod or iPhone
time
This function allows you to set the clock’s time to
be the same time as your iPod or iPhone’s time
( Zpage 7, “Compatible iPod or iPhone”).
Press [TIME SYNC] while an iPod or iPhone
is docked unto the main unit.
Note:
• Exact synchronisation of an iPod or iPhone
with the main unit is not possible. There could
be a difference of up to 59 seconds between
them.
• Compatibility depends on the software version
of your iPod or iPhone.
Using an iPod or iPhone
1 Pull out the iPod or iPhone support.
Adjust the support according to the height of
your iPod or iPhone.
iPod classic
iPhone
iPod touch
iPod nano
Gently pull out the
iPod or iPhone
support.
iPod
(not included)
2 Connecting an iPod or iPhone.
Hold the main unit when connecting or
disconnecting the iPod or iPhone.
Note:
When docking an iPod touch or iPhone for the
first time, a message will be displayed on your
iPod touch or iPhone if the Memory Loader
application has not been installed (Zpage 15).
(Continued on next page)
RQTX1210-1B_gb.indd 11RQTX1210-1B_gb.indd 11 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
12
12
Using the radio
Manual tuning
1 Press [SOURCE] to select “RADIO FM”.
2 Press [2/–, ADJ] or [+/6, ADJ] to
select the desired frequency.
To tune automatically
Press and hold [2/–, ADJ] or [+/6, ADJ]
until the frequency starts changing rapidly.
Automatic tuning stops when it finds a station or
when [2/–, ADJ] or [+/6, ADJ] is pressed
again.
Note:
For better reception, extend and change the
direction of the FM antenna.
Memory preset
You may store your favourite channels in 5 FM
preset channels.
Preparation
Press [SOURCE] to select “RADIO FM”.
Automatic presetting (AP)
Press and hold [SOURCE] until “AP” is
displayed.
Note:
• Automatic presetting begins from the current
frequency.
• Only the first 5 stations detected will be stored.
• “AP” will blink continuously until all 5 channels
have been set.
Charging an iPod or iPhone
The iPod or iPhone charges automatically when
connected to the main unit.
• See iPod or iPhone display to check its
charging status.
• If the iPod or iPhone is not being used for an
extended period of time after charging has
completed, disconnect it from the main unit,
as the battery will be depleted naturally. (Once
fully charged, additional charging will not
occur.)
Playing an iPod or iPhone
1 Place an iPod or iPhone in the dock and
turn it on.
2 Press [SOURCE] to select “IPOD”.
3 Press [ 4/9 ] once to start music playback
from the iPod or iPhone. Press again to
pause playback.
4 Press [2/–, ADJ] or [+/6, ADJ] to
skip to the previous or next track.
5 Press and hold [2/–, ADJ] or
[+/6, ADJ] to backward or forward
search through a track.
Note:
• If the iPod or iPhone automatically shuffles or
skip a track;
– Turn off its “Shake” feature (if there is any).
– Play the iPod or iPhone using an iPod or
iPhone dock adaptor (not included).
• For iPod or iPhone operation details, refer to
iPod or iPhone’s User Guide.
RQTX1210-1B_gb.indd 12RQTX1210-1B_gb.indd 12 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
13
13
Using the alarm
You can set two different alarm times. Before
setting the alarm, make sure to set the clock
( Zpage 10, “Setting the clock”).
Setting the alarm
1 Press and hold [ALARM 1] or [ALARM 2]
until the hour display blinks.
2 Within 10 seconds, press [2/–, ADJ] or
[+/6, ADJ] to set the hour.
3 Press [ALARM 1] or [ALARM 2] to
confirm.
4 Repeat steps 2 and 3 to set the minutes.
5 Press [2/–, ADJ] or [+/6, ADJ] to
select the days of the week:
MON-SUN (everyday) ]MON-FRI (weekdays)
SAT-SUN (weekend)
SAT-SUN (weekend)
6 Press [ALARM 1] or [ALARM 2] to
confirm.
7 Press [2/–, ADJ] or [+/6, ADJ] to
select the desired alarm mode: “IPOD”,
“RADIO” or “BUZZER”.
Manual presetting
1 Press [2/–, ADJ] or [+/6, ADJ] to
select the desired frequency.
2 Press and hold [SET/PRESET] for
2 seconds to display the preset number.
3 Press [2/–, ADJ] or [+/6, ADJ] to
select a preset number.
4 Press [SET/PRESET] again to confirm.
Tuning in to a preset channel
Press [SET/PRESET] to switch between
preset channels.
Using the sleep timer
This function enables you to turn off the unit
automatically after the set time (only in iPod and
radio mode).
1 Press [SLEEP] to activate the timer.
2 Press [SLEEP] again to select your
desired time (in minutes).
OFF (default)
] 30 ] 60 ] 90 ] 120
Note:
Press [SLEEP] once to check the remaining
time. (Continued on next page)
RQTX1210-1B_gb.indd 13RQTX1210-1B_gb.indd 13 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
14
14
8 Press [ALARM 1] or [ALARM 2] to
confirm.
“IPOD” selection: Continue with steps 9
and 10.
“RADIO” selection: Continue from steps 11
to 14.
Setting iPod alarm
9 Press [2/–, ADJ] or [+/6, ADJ] to
adjust the volume level.
10 Press [ALARM 1] or [ALARM 2] to
confirm the setting.
Note:
• The buzzer will sound if no iPod or iPhone is
detected at the set alarm time.
• Music will be played from the iPod or iPhone’s
library when the alarm sounds.
Setting radio alarm
11 Press [2/–, ADJ] or [+/6, ADJ] to
adjust the volume level.
12 Press [ALARM 1] or [ALARM 2] to
confirm.
13 Press [2/–, ADJ] or [+/6, ADJ] to
select the desired preset channel.
14 Press [ALARM 1] or [ALARM 2] to
confirm the setting.
Note:
• Alarm will function only when powered by AC
power.
• To activate or display the alarm setting, press
[ALARM 1] or [ALARM 2] once.
• Press [ALARM 1] or [ALARM 2] again to
deactivate the alarm function.
Turning off the alarm
Press [ALARM OFF] to turn off the alarm.
The alarm will sound at the same time on the
next day.
Note:
If the alarm is not turned off, it will sound
continuously for 59 minutes before turning off
by itself.
Snoozing the alarm
Press [SNOOZE] when the alarm sounds to
stop it for a few minutes.
The alarm will sound again after 9 minutes.
Tip:
For iPod touch and iPhone users, use the
Memory Loader application to unlock custom
alarm settings (Zpage 15).
RQTX1210-1B_gb.indd 14RQTX1210-1B_gb.indd 14 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
15
15
Using the Memory Loader
application
This main unit is designed to operate with
the Memory Loader application which can be
downloaded from the App Store (search for
MemoryLoader).
If you have not already downloaded the free
Memory Loader application, you will see the
following message on your iPod touch or iPhone
display:
Application Not Installed
This accessory requires
an application you do not
have installed. Would you
like to install it from the
App store?
This message is a reminder for you to download
the application in order to enjoy the enhanced
features of this main unit. However, your iPod
touch and iPhone will work properly with this
main unit even without the Memory Loader
application installed.
The Memory Loader application only works with
iPod touch and iPhone running on OS 3.0 or
later.
Once the Memory Loader application is
installed into your iPod touch or iPhone, the
following functions can be easily accessible
and controlled directly through the application’s
platform.
Alarm
• Adjust alarm 1 and alarm 2 settings easily.
• You may select any combination of days for the
alarm to sound.
• You can choose your desired snooze settings
from a choice of 1 to 30 minutes.
Radio
• Preset 5 FM channels by scrolling through your
desired frequencies by using the picker.
Events
• You can be alerted of dates stored on your
iPod touch or iPhone contacts (if the alarm is
set to sound on that day).
Nap
• You can set a short nap timer or countdown on
your iPod touch or iPhone.
Daylight saving time (DST)
• Activate or deactivate the daylight saving time
function with one simple step.
For more information, visit:
www.memoryloader.com
RQTX1210-1B_gb.indd 15RQTX1210-1B_gb.indd 15 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
16
16
Memory back-up battery
The back-up battery (CR2032, not included)
saves the clock and alarm settings in the event
of a power interruption.
Inserting the battery
When there is no battery, the battery-weak
indicator will be displayed until a battery is
inserted.
Bottom view
1 Keep the AC adaptor connected to
the household mains socket when
unscrewing the screw on the cover of the
battery holder using a screwdriver.
2 Open the cover of the battery holder.
3 Insert a new battery with the (+) side
facing up.
4 Close the cover of the battery holder and
secure it with the screw.
Replacing the battery
The service life of this battery is approximately
1 month.
When the battery is weak, the battery-weak
indicator will blink constantly on the display.
Note:
• Do not heat or expose to flame.
• Do not leave the battery(ies) in an automobile
exposed to direct sunlight for a long period of
time with doors and windows closed.
• Remove the battery if the clock radio is not
going to be used for a long period of time.
Store in a cool, dark place.
RQTX1210-1B_gb.indd 16RQTX1210-1B_gb.indd 16 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
17
17
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same
or equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
Warning
Keep the Button-Type battery out of the
reach of children. Never put Button-Type
battery in mouth. If swallowed call your
doctor.
Warning
Risk of fire, explosion and burns. Do not
recharge, disassemble, heat above 60°C or
incinerate.
Troubleshooting guide
Before requesting service, make the following
checks. If you are in doubt about some of the
check points, or if the solutions indicated do
not solve the problem, consult your dealer for
instructions.
■Clock
Clock cannot be synchronised to iPod or
iPhone’s time.
• Make sure the iPod or iPhone is securely
connected and turned on (Zpage 11).
• Update your iPod or iPhone with the latest
software.
Daylight saving time does not work.
• Make sure the clock has been set correctly.
• Press and hold [SLEEP] in clock mode to
activate daylight saving time (Zpage 11).
■Alarm
The iPod, radio or buzzer alarm does not
sound at the preset time.
• Check that “ALARM 1” or “ALARM 2” has been
correctly activated (Zpage 13).
The iPod or radio alarm is activated but there
is no sound at the preset time.
• Check the alarm’s volume setting (Zpage 14).
(Continued on next page)
RQTX1210-1B_gb.indd 17RQTX1210-1B_gb.indd 17 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
18
18
■iPod or iPhone
The iPod or iPhone cannot be operated with
this unit.
• Make sure the iPod or iPhone has been
securely connected and turned on (Zpage 11).
• Update your iPod or iPhone with the latest
software.
There is no sound from the iPod or iPhone.
• Make sure the iPod or iPhone has been
securely connected (Zpage 11).
• Adjust the volume.
The iPod or iPhone does not charge.
• Check the connections. Turn off and remove
the iPod or iPhone from the dock connector.
Reinsert and turn it on again (Zpage 11).
■Radio
A noise or sound distortion is heard.
• Distance the unit away from any television,
personal computer or device easily influenced
by magnetism. Maintenance
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to
clean this unit.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
Reset
This function enables you to restore the main
unit to the original factory settings or when it is
behaving abnormally.
Rear view
Press [RESET] with a paper clip or a pointed
object.
RQTX1210-1B_gb.indd 18RQTX1210-1B_gb.indd 18 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

RQTX1210
19
19
Specifications
AMPLIFIER SECTION
RMS Output Power (Mono)
Front channel
2.6 W per channel (8 ), 1 kHz, 10% THD
TUNER SECTION
Preset memory FM 5 stations
Frequency modulation (FM)
Frequency range
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals 75 (unbalanced)
SPEAKER SECTION
Type 1 way, 1 speaker system (Bass reflex)
Speaker unit(s) Impedance 8
Full range 2.5 cm cone type
GENERAL
Power supply (AC adaptor)
AC 100 to 240 V, 50/60 Hz
DC Output 7.5 V
Power consumption
(with iPod or iPhone charging)
Main unit 7 W
Dimensions (W x H x D)
112 mm x 80 mm x 150 mm
Mass
Main unit 0.37 kg
AC adaptor 0.14 kg
Operating temperature range 0°C to +35°C
Operating humidity range
20% to 80% RH (no condensation)
Power consumption in standby mode:
Main unit 0.3 W (approximate)
AC adaptor 0.3 W (approximate)
Note:
1) Specifications are subject to change without
notice.
Mass and dimensions are approximate.
2) Total harmonic distortion is measured by the
digital spectrum analyser.
RQTX1210-1B_gb.indd 19RQTX1210-1B_gb.indd 19 6/15/2010 10:24:27 AM6/15/2010 10:24:27 AM

Panasonic Corporation
Web Site: http://panasonic.net
Pursuant to at the directive 2004/108/EC, article 9 (2)
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
En
RQTX1210-1B
L0610HH1060
RQTX1210-1B_gb.indd 20RQTX1210-1B_gb.indd 20 6/15/2010 10:24:28 AM6/15/2010 10:24:28 AM