Panasonic KX-FC379CX User manual

© 2005 Panasonic Communications Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
KX-FC379CX
(for Asia and Middle Near East)
Digital Cordless Phone System with FAX and Copier
ORDER NO. KMF0504858CE

16.8. SENSOR BOARD (PCB7)
SW402
1
2
34
SW401
REED SW
CN401
1PTOP
2REED
3GND
KX-FC379CX : SENSOR BOARD SCHEMATIC DIAGRAM
250
KX-FC379CX
Y
KXFC379CX

1 INTRODUCTION 4
1.1. ABOUT LEAD FREE SOLDER (PbF: Pb free) 4
1.2. SAFETY PRECAUTIONS 6
1.3. INSULATION RESISTANCE TEST 6
1.4. FOR SERVICE TECHNICIANS 6
1.5. BATTERY CAUTION 6
1.6. AC CAUTION 7
1.7. PERSONAL SAFETY PRECAUTIONS 7
1.8. SERVICE PRECAUTIONS 8
2 FEATURES AND SPECIFICATIONS 9
2.1. FEATURES 9
2.2. OPTIONAL ACCESSORIES 9
2.3. SPECIFICATIONS 10
3 LOCATION 11
3.1. OVERVIEW 11
3.2. CONTROL PANEL 12
4 INSTALLATION 14
4.1. INSTALLATION SPACE 14
4.2. CONNECTIONS 15
4.3. BATTERY CHARGE 15
4.4. INSTALLING THE INK FILM 16
4.5. REPLACING THE INK FILM 18
4.6. INSTALLING THE PAPER TRAY 18
4.7. INSTALLING THE RECORDING PAPER 19
4.8. BATTERY INSTALLATION 20
4.9. BATTERY REPLACEMENT 21
4.10. INSTALLING THE BELT CLIP 21
4.11. INSTALLING THE HEADSET (optional) 22
4.12. SETTING YOUR LOGO 22
5 MAINTENANCE 24
5.1. MAINTENANCE ITEMS AND COMPONENT LOCATIONS
24
5.2. GEAR SECTION 26
5.3. JAMS 29
5.4. CLEANING 32
6 DISASSEMBLY INSTRUCTIONS 34
6.1. DISASSEMBLY FLOWCHART 34
6.2. DISASSEMBLY PROCEDURE 36
7 TROUBLESHOOTING GUIDE 51
7.1. TROUBLESHOOTING SUMMARY 51
7.2. USER RECOVERABLE ERRORS 52
7.3. PROGRAMMING AND LISTS 55
7.4. TEST FUNCTIONS 58
7.5. REMOTE PROGRAMMING 74
7.6. THE EXAMPLE OF THE PRINTED LIST 77
7.7. TROUBLESHOOTING DETAILS 81
8 CIRCUIT OPERATIONS 147
8.1. CONNECTION DIAGRAM 147
8.2. GENERAL BLOCK DIAGRAM 148
8.3. CONTROL SECTION 150
8.4. FACSIMILE SECTION 159
8.5. SENSORS AND SWITCHES 166
8.6. MODEM SECTION 169
8.7. DESCRIPTION OF BLOCK DIAGRAM IN ANALOG
SECTION 176
8.8. NCU SECTION 178
8.9. ITS (Integrated Telephone System) AND MONITOR
SECTION 182
8.10. ATAS (Automatic Telephone Answering System)
SECTION 182
8.11. OPERATION BOARD SECTION 183
8.12. LCD SECTION 184
8.13. POWER SUPPLY BOARD SECTION 185
8.14. CORDLESS SECTION (BASE UNIT) 188
8.15. CORDLESS SECTION (HANDSET) 194
8.16. CPU DATA (Cordless Base Board) 198
8.17. CPU DATA (Handset) 199
8.18. EXPLANATION OF RF UNIT TERMINALS (RF Unit) 200
9 REFERENCE MATERIAL DATA 201
9.1. TERMINAL GUIDE OF THE ICs TRANSISTORS AND
DIODES 201
9.2. HOW TO REPLACE THE FLAT PACKAGE IC 202
9.3. TEST CHART 204
10 FIXTURES AND TOOLS 206
11 CABINET, MECHANICAL AND ELECTRICAL PARTS
LOCATION 207
11.1. GENERAL SECTION 207
11.2. OPERATION PANEL SECTION 208
11.3. UPPER CABINET SECTION 209
11.4. BACK COVER SECTION 210
11.5. LOWER CABINET / P.C.BOARD SECTION 213
11.6. GEAR BLOCK SECTION 214
11.7. HANDSET SECTION 215
11.8. SCREWS 216
12 ACCESSORIES AND PACKING MATERIALS 217
13 REPLACEMENT PARTS LIST 218
13.1. CABINET AND ELECTRICAL PARTS 218
13.2. DIGITAL BOARD PARTS 220
13.3. ANALOG BOARD PARTS 222
13.4. OPERATION BOARD PARTS 223
13.5. POWER SUPPLY BOARD PARTS 224
13.6. CORDLESS BASE BOARD PARTS 225
13.7. HANDSET BOARD PARTS 226
13.8. SENSOR BOARD PARTS 227
13.9. FIXTURES AND TOOLS 227
14 PRINTED CIRCUIT BOARD 229
14.1. DIGITAL BOARD (PCB1) 229
14.2. ANALOG BOARD (PCB2) 231
14.3. OPERATION BOARD (PCB3) 233
14.4. POWER SUPPLY BOARD (PCB4) 234
14.5. CORDLESS BASE BOARD (PCB5) 235
14.6. HANDSET BOARD (PCB6) 236
CONTENTS
Page Page
2
KX-FC379CX

14.7. SENSOR BOARD (PCB7) 237
15 FOR THE SCHEMATIC DIAGRAMS 238
16 SCHEMATIC DIAGRAM 239
16.1. DIGITAL BOARD (PCB1) 239
16.2. ANALOG BOARD (PCB2) 241
16.3. OPERATION BOARD (PCB3) 243
16.4. POWER SUPPLY BOARD (PCB4) 244
16.5. CORDLESS BASE BOARD (PCB5) 245
16.6. HANDSET BOARD (PCB6) 247
16.7. RF PART in HANDSET BOARD 249
16.8. SENSOR BOARD (PCB7) 250
3
KX-FC379CX

1 INTRODUCTION
1.1. ABOUT LEAD FREE SOLDER (PbF: Pb free)
Note:
In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that
contains lead.
We will use PbF solder when discussing the lead free solder used in our manufacturing process which is made from Tin (Sn),
Silver, (Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder although, with some precautions, standard Pb solder can also be used.
Caution
• • •
• PbF solder has a melting point that is 50° ~ 70° F, (30° ~ 40°C) higher than Pb solder. Please use a soldering iron with
temperature control and adjust it to 700° ± 20° F, (370° ± 10°C). In case of using high temperature soldering iron, please
be careful not to heat too long.
• • •
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100°F, (600°C).
• • •
• If you must use Pb solder on a PCB manufactured using PbF solder, remove as much of the original PbF solder as possible
and be sure that any remaining is melted prior to applying the Pb solder.
• • •
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
opposite side (See figure, below).
1.1.1. Suggested PbF Solder
There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer’s specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
4
KX-FC379CX

1.1.2. How to Recognize that Pb Free Solder is Used
P.C.Boards marked as “PbF” use Pb Free solder. (See the figure below.)
(Example : Digital Board)
Note:
The “PbF” marked may be found on different areas of the same P.C.Board, depending on manufacture date.
5
KX-FC379CX

1.2. SAFETY PRECAUTIONS
1.Before servicing, unplug the AC power cord to prevent an electric shock.
2.When replacing parts, use only the manufacturer´s recommended components.
3.Check the condition of the power cord. Replace if wear or damage is evident.
4.After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc.
5.Before returning the serviced equipment to the customer, be sure to perform the following insulation resistance test to prevent
the customer from being exposed to shock hazards.
1.3. INSULATION RESISTANCE TEST
1.Unplug the power cord and short the two prongs of the plug with a jumper wire.
2.Turn on the power switch.
3.Measure the resistance value with an ohmmeter between the jumpered AC plug and each exposed metal cabinet part
(screw heads, control shafts, bottom frame, etc.).
Note: Some exposed parts may be isolated from the chassis by design. These will read infinity.
4.If the measurement is outside the specified limits, there is a possibility of a shock hazard.
1.4. FOR SERVICE TECHNICIANS
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1.Cover the plastic part´s boxes with aluminum foil.
2.Ground the soldering irons.
3.Use a conductive mat on the worktable.
4.Do not touch the IC or LSI pins with bare fingers.
1.5. BATTERY CAUTION
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s Instructions.
The lithium battery is a critical component (type No. CR2032). Please observe for the proper polarity and the exact location
when replacing it and soldering the replacement lithium battery in.
6
KX-FC379CX

1.6. AC CAUTION
For safety, before closing the lower cabinet, please make sure of the following precautions.
1.The earth lead is fixed with the screw.
2.The AC lead is connected properly to power supply unit.
3.Wrap the earth lead around the core 3 times.
4.Wrap the AC lead around the core 2 times.
1.7. PERSONAL SAFETY PRECAUTIONS
1.7.1. Moving Sections of the Unit
Be careful not to let your hair, clothes, fingers, accessories, etc., become caught in any moving sections of the unit.
The moving sections of the unit are the rollers and a gear. There is a separation roller and a document feed roller which are rotated
by the document feed motor. A gear rotates the two rollers. Be careful not to touch them with your hands, especially when the unit
is operating.
7
KX-FC379CX

1.7.2. Live Electrical Sections
All the electrical sections of the unit supplied with AC power by the AC power cord are live.
Never disassemble the unit for service with the AC power supply plugged in.
CAUTION:
AC voltage is supplied to the primary side of the power supply unit. Therefore, always unplug the AC power cord before
disassembling for service.
1.8. SERVICE PRECAUTIONS
1.8.1. Precautions to Prevent Damage from Static Electricity
Electrical charges accumulate on a person. For instance, clothes rubbing together can damage electric elements or change their
electrical characteristics. In order to prevent static electricity, touch a metallic part that is grounded to release the static electricity.
Never touch the electrical sections such as the power supply unit, etc.
8
KX-FC379CX

General
Please refer to WHEN YOU DON´T KNOW HOW TO
OPERATE THE UNIT, USE THE HELP FUNCTION (P.51)
to print below features.
• • •
• Help function
Display:
− − −
− SEND GUIDE
− − −
− BASIC SETTINGS
− − −
− FEATURE LIST
− − −
− TAM OPERATION
− − −
− FAX RECEIVING
− − −
− COPIER
− − −
− REPORTS
− − −
− CALLER ID
• • •
• LCD (Liquid Crystal Display) readout
Plain Paper Facsimile Machine
• • •
• 9 second transmission speed *
• • •
• Letter / Legal / A4, G3 compatible
• • •
• Automatic document feeder (up to 10 sheets)
• • •
• Quick scan
• • •
• Resolution: Standard/Fine/Super fine/Photo (64 level)
• • •
• Broadcast with Navigator
• • •
• 30-sheet recording paper capacity (60 g/m2to 80 g/m2)
• • •
• Automatic fax/phone switching
• • •
• Distinctive ring detection **
* The 9 second speed is based upon the ITU-T No. 1 Test
Chart on the condition that memory transmission is performed.
** Subscription to distinctive ring services is required.
Large Memory... Performed by DRAM
Approx. 28 pages of memory reception
Approx. 25 pages of memory transmission
Integrated Telephone System
• • •
• On-hook dialing
• • •
• Digital duplex speakerphone
• • •
• Voice muting
• • •
• Redialing function
• • •
• Both the handset and base unit up to 50-Station
telephone phone book in total.
• • •
• Caller ID compatible
Feature requires a subscription to caller identification
services offered by certain local telephone companies
for a tee. You and your caller(s) must be in areas that
provide caller identification services, and compatible
equipment must be used by both telephone companies.
Feature not available when the unit is connected to a
PBX system.
Enhanced Copier Function
• • •
• Multi-copy function (up to 30 copies)
• • •
• Enlargement and reduction
• • •
• Collate
• • •
• 64-Level halftone
Digital Answering System
• • •
• Voice Time / Day Stamp
• • •
• 18-Minutes recording time
• • •
• Voice pager call
2.4 GHz Cordless
• • •
• Fax activation from handset
• • •
• 11 day battery life
2 FEATURES AND SPECIFICATIONS
2.1. FEATURES
2.2. OPTIONAL ACCESSORIES
Model No. Description Specifications
KX-FA54E /KX-FA54A Replacement Film
*
135 m × 2 rolls
(Each roll will print about 105 A4-sized pages)
HHR-P104 Rechargeable Batteries Nickel metal hydride (Ni-MH) batteries
KX-TCA89BX Headset --------------------------------
*1 We recommend that you buy a full-size replacement film for continuous use of your unit. Please use genuine Panasonic
replacement film. The ink film is not reusable. Do not rewind and use the ink film again.
9
KX-FC379CX

2.3. SPECIFICATIONS
Any details given in these instructions are subject to change without notice.
2.3.1. Base Unit
Applicable Lines: Public Switched Telephone Network
Document Size: Max. 216 mm in width, Max. 600 mm in length
Effective Scanning Width: 208 mm
Recording Paper Size: Letter: 216 mm × 279 mm
A4: 210 mm × 297 mm
Effective Printing Width: Letter: 208 mm
A4: 202 mm
Recording Paper Weight: 60 g//m2to 90 g/m2
Transmission speed*1:Approx. 9 s/page *2
Scanning Density: Horizontal: 8 pels/mm
Vertical:
3.85 lines/mm (standard resolution)
7.7 lines/mm (fine/photo resolution)
15.4 lines/mm (super fine resolution)
Photo resolution: 64-level
Scanner Type: Contact Image Sensor
Printer Type: Thermal Transfer on Plain Paper
Data Compression System: Modified Huffman (MH), Modified READ (MR)
Modem Speed: 14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Operating Environment: 5—35°C, 20—80 % RH (Relative Humidity)
Dimensions: Approx. height 128 mm × width 389 mm × depth 242 mm
Mass (Weight): Approx. 3.1 kg
Power Consumption: Standby: Approx. 7.0 W
Transmission: Approx. 13 W
Reception: Approx. 45 W (When receiving a 20% black document)
Copy: Approx. 45 W (When copying a 20% black document)
Maximum: Approx. 135 W (When copying a 100% black document)
Power Supply: 220V - 240V AC, 50/60 Hz
Fax Memory Capacity*3:Transmission: Approx. 25 pages
Reception: Approx. 28 pages
Voice Memory Capacity*4:Approx. 18 minutes
*1Transmission speed varies depending on page content, resolution, telephone line conditions, and the other party’s machine.
*2Transmission speed is based upon the ITU-T No. 1 Test Chart and original mode. (Refer to ITU-T No.1 Test Chart (P.204).) If
the capabilities of the other party’s machine are inferior to your unit, the transmission speed may be lower.
*3If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will
be retained in memory.
*4Including greeting messages. Total recording time may be reduced by the calling party´s background noise.
2.3.2. Handset
Operating Environment: 5°C—40°C
Frequency: 2.40 GHz—2. 48 GHz
Dimensions: Approx. height 208 mm × width 52 mm × depth 39 mm
Mass (Weight): Approx. 190 g
Power Supply: Ni-MH battery (3.6 V, 830 mAh)
Security codes: 1,000,000
10
KX-FC379CX

(1) CHARGE indicator
(2) Document guides
(3) Paper tray
(4) Metal recording paper guide
(5) Recording paper entrance
(6) Recording paper exit
(7) Tension plate
(8) Antenna
(9) Front cover
(10) Document entrance
(11) Document exit
(12) Speaker
(13) Green button (Back cover release button)
(14) Back cover
(1) Ringer/Message alert indicator
(2) Antenna
(3) Receiver
(4) Headset jack
(5) Microphone
(6) Speaker
3 LOCATION
3.1. OVERVIEW
3.1.1. Base Unit
3.1.2. Handset
11
KX-FC379CX

3.2.1. Base Unit
(1) [MIC]
• • •
• The built-in microphone.
(2) [SEARCH]
• • •
• To use Caller ID features.
(3) [LOCATOR/INTERCOM]
• • •
• To page or locate the handset.
• • •
• To transfer a call.
(4) [RECORD]
• • •
• To record a greeting message.
• • •
• To record a memo message.
(5) [PLAY MESSAGES]
• • •
• To play recorded messages.
(6) [ERASE]
• • •
• To erase recorded messages.
• • •
• To erase a recorded greeting message.
(7) [AUTO ANSWER]
• • •
• To turn the AUTO ANSWER setting ON/OFF.
(8) [TONE]
• • •
• To change from pulse to tone temporarily during dialing
when your line has rotary pulse services.
(9) [COPY]
• • •
• To copy a document.
(10) [FAX/START] [SET]
• • •
• To start sending or receiving a fax.
• • •
• To store a setting during programming.
(11) [STOP]
• • •
• To stop an operation or programming.
(12) [HELP]
• • •
• To print helpful information for quick referance .
(13) [MENU]
• • •
• To initiate or exit programming.
(14) [SLOW]
• • •
• To slow down message playback.
(15) [VOLUME] [NAVIGATOR]
• • •
• To adjust volume.
• • •
• To search for a stored item.
(16) [QUICK]
• • •
• To speed up message playback.
(17) [SP-PHONE]
• • •
• For speakerphone operation.
(18) [MUTE]
• • •
• To mute your voice to the other party during a
conversation. Press this button again to resume the
conversation.
(19) [FLASH/CALL WAIT ]
• • •
• To access special telephone services such as call
waiting or for transferring extension calls.
• • •
• The flash time can be changed.
(20) [REDIAL/PAUSE]
• • •
• To redial the last number dialed from the base unit.
• • •
• To insert a pause during dialing.
3.2. CONTROL PANEL
12
KX-FC379CX

(1) [Soft keys]
• • •
• Two soft keys are used to select functions displayed
directly above each key. Functions displayed above the
keys will change depending on the state of usage.
(2) [TALK]
• • •
• To make/answer calls.
(3) [SP-PHONE]
• • •
• For speakerphone operation.
(4) [TONE]
• • •
• To change from pulse to tone temporarily during dialing
when your line has rotary pulse services.
(5) [HOLD/INTERCOM]
• • •
• To put a call on hold.
• • •
• To page the base unit.
• • •
• To transfer a call.
(6) [VOL.], [Navigator]
• • •
• To adjust volume.
• • •
• To search for a stored item.
(7) [OFF]
• • •
• To hang up.
• • •
• To stop an operation or programming.
(8) [MENU]
• • •
• To initiate programming.
(9) [FLASH/CALL WAIT]
• • •
• To access special telephone services such as call
waiting or for transferring extension calls.
• • •
• The flash time can be changed.
(10) [REDIAL]
• • •
• To redial one of the last 5 numbers dialed from the
handset.
3.2.2. Handset
13
KX-FC379CX

4 INSTALLATION
4.1. INSTALLATION SPACE
The space required to install the unit is shown below.
The dimensions given are necessary for the unit to operate efficiently.
Note:
• • •
• Avoid excessive heat or humidity.
• • •
• Use the unit within the following ranges of temperature and humidity.
• • •
• Ambient temperature: 5°C to 35°C
• • •
• Relative humidity: 20% to 80% (without condensation)
• • •
• Avoid direct sunlight.
• • •
• Do not install near devices which contain magnets or generate magnetic fields.
• • •
• Do not subject the unit to strong physical shock or vibration.
• • •
• Keep the unit clean. Dust accumulation can prevent the unit from functioning properly.
• • •
• To protect the unit from damage, hold both sides when you move it.
14
KX-FC379CX

4.2. CONNECTIONS
Caution:
• • •
• When you operate this product, the power outlet
should be near the product and easily accessible.
4.2.1. Base Unit
(1) Telephone line cord.
• • •
• Connect to a single telephone line jack.
(2) Power cord.
• • •
• Connect to the power outlet (220V - 240V, 50/60 Hz).
Note:
• • •
• To avoid malfunction, do not position the fax machine
near appliances such as TVs or speakers which
generate an intense magnetic field.
• • •
• If any other device is connected to the same telephone
line, this unit may disturb the network condition of the
device.
If you use this unit with a computer or subscribe to an
xDSL service:
• • •
• Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversation, or Caller ID may not function properly. A
filter to prevent this is provided from your service
company. Please attach the filter ( ) to the telephone
line cord of the fax machine.
4.3. BATTERY CHARGE
Place the handset on the cradle of the base unit for about
6 hours before initial use.
• • •
• The unit will beep once, the [CHARGE] indicator ( )
will light, and “ Charging ” will be displayed.
• • •
• When the battery is fully charged, “Charge completed”
will be displayed.
Note:
• • •
• To ensure the battery charges properly, clean the
handset charge contacts ( ) and the charger
charge contacts ( ) with a soft, dry cloth once a
month. Clean more often if the unit is subject to
grease, dust or high humidity.
• • •
• The battery cannot be overcharged.
Battery strength
You can confilm the battery strength on the handset
display.
Battery life
• • •
• After your Panasonic battery is fully charged, you can
expect the following performance:
— it should last up to 5 hours while in use (in
conversation).
—it should last up to about 11 days while not in use (off
the base unit).
Note:
• • •
• Battery power is consumed whenever the handset is off
15
KX-FC379CX

the base unit, even when the handset is not in use. The
longer you leave the handset off the base unit, the time
you can actually talk on the handset will be shortened.
Actual battery performance depends on a combination
of how often the handset is in use (in conversation) and
how often it is not in use (off the base unit).
• • •
• Once the battery is fully charged, you do not have to
place the handset on the cradle of the base unit until
“Recharge battery” is displayed and/or flashes.
This will maximize the battery life.
Recharge
Recharge the battery when:
—”Recharge battery” is shown and/or flashes on the
handset display.
—the handset beeps intermittently while it is in use.
• • •
• Recharge the handset battery for more than 15 minutes,
or the display will continue showing the indication.
• • •
• If the battery has been discharged, the handset will
display “Charge for 6h” and when you place the
handset on the cradle of the base unit. The handset will
not work unless the battery is charged. Continue
charging.
4.4. INSTALLING THE INK FILM
1.Open the front cover by pulling up the center part.
2.Release the back cover by pushing the green button ( ).
• • •
• You can also release the back cover by pushing in the
green lever ( ).
3.Open the back cover.
16
KX-FC379CX

4.Insert the front ink film roll by inserting its blue gear into the
left slot of the unit ( ). Insert the rear ink film roll by
inserting its white gear into the left slot of the unit ( ).
• • •
• The ink film is safe to touch and will not rub off on your
hands like carbon paper.
• • •
• Make sure the blue gear ( ) and white gear ( )are
installed as shown.
5.Turn the gear of the blue core ( ) in the direction of the
arrow until the ink film is tight ( ).
• • •
• Make sure that the ink film is wrapped around the blue
core ( ) at least once.
6.Close the back cover securely by pushing down on the
notched area at both ends ( ).
7.Close the front cover securely.
17
KX-FC379CX

4.5. REPLACING THE INK FILM
To ensure that the unit operates properly, we recommend the
use of Panasonic replacement film. (Refer to OPTIONAL
ACCESSORIES (P.9).)
• • •
• We cannot be responsible for any damage to the unit or
degradation of print quality which may occur from the use of
non-Panasonic replacement film.
1.Open the covers. (See steps 1 to 3 on INSTALLING THE
INK FILM (P.16).)
2.Remove the used core ( ) and used ink film( ).
3.Remove the stoppers ( ) and tags ( ) from the new ink
film ( ).
4.Insert the ink film and close the covers. (See steps 4 to 6 on
INSTALLING THE INK FILM (P.16).)
4.6. INSTALLING THE PAPER
TRAY
Insert the tabs on the paper tray ( ) into the slots on the
back of the unit ( ).
TouseA4sizepaper
Insert the tab on the A4 paper guide ( ) into the slot on
the paper tray ( ) and push the guide until it clicks into
place. Attach the paper tray to the back of the unit.
Note:
• • •
• When you use letter or legal paper, you do not need
to install the A4 paper guide.
• • •
• Change the recording paper size to “A4” (feature
#16 on Program Mode Table (P.75).)
18
KX-FC379CX

To use Letter size paper
Remove the A4 paper guide.
1.Press down the tab ( )
2.Push the tab towards the direction of the arrow ( ).
Note:
• • •
• Change the recording paper size to “letter” (feature
#16 on Program Mode Table (P.75).)
4.7. INSTALLING THE RECORDING
PAPER
The unit can hold:
—Up to 30 sheets of 60 g/m2to 80 g/m2paper.
—Up to 20 sheets of 90 g/m2paper.
1.Pull the tension plate forward ( ).
2.Fan the paper to prevent paper jams.
3.Insert the paper, print-side down ( ).
4.Push the tension plate back ( ).
• • •
• If the paper is not inserted correctly, readjust the paper,
or the paper may jam.
19
KX-FC379CX