Panasonic KX-TGA710 User manual

Operating Instructions
Call Block Button
Model No. KX-TGA710
KX-TGA760
KX-TG3101
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save
them for future reference.
For assistance, visit our Web site: http://shop.panasonic.com/
support for customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
Printed in Malaysia PNQX8877WA PP1218MU3061
KX-TGA7xx_(en-en)_0623_ver301.pdf 1 6/23/2021 6:48:18 PM

Introduction
Accessory information ...............3
Graphical symbols for use on
equipment and their
descriptions ...............................4
Important Information
For your safety ...........................5
Important safety instructions ......6
For best performance ................6
Other information .......................7
Specifications ............................7
Getting Started
Setting up ..................................8
Controls .....................................9
Display icons/Indicator ...............9
Language setting .....................10
Basic Operation
Caller ID service ......................11
Caller list ..................................12
Call block .................................12
Allow list ...................................14
Useful Information
Error messages .......................16
Troubleshooting .......................16
FCC and other information ......19
Appendix
Customer services ...................21
Limited Warranty (ONLY FOR
U.S.A.) .....................................22
Index
Index.........................................24
2
Table of Contents
KX-TGA7xx_(en-en)_0623_ver301.pdf 2 6/23/2021 6:48:18 PM

Accessory information
Supplied accessories
No. Accessory item/Part number Quantity
AAC adaptor/PNLV226-0X 1
BTelephone line cord/PNJA1210Z 1
A B
Other information
RDesign and specifications are subject to change without notice.
RThe illustrations in these instructions may vary slightly from the actual
product.
For assistance, please visit http://shop.panasonic.com/support 3
Introduction
KX-TGA7xx_(en-en)_0623_ver301.pdf 3 6/23/2021 6:48:18 PM

Graphical symbols for use on equipment
and their descriptions
Symbol Explanation Symbol Explanation
Alternating current
(A.C.)
Class P equipment
(equipment in which
protection against
electric shock relies on
Double Insulation or
Reinforced Insulation)
Direct current (D.C.) “ON” (power)
Protective earth “OFF” (power)
Protective bonding
earth
Stand-by (power)
Caution, risk caused
by visible radiation
“ON”/“OFF” (power;
push-push)
For indoor use only Caution, risk of electric
shock
4For assistance, please visit http://shop.panasonic.com/support
Introduction
KX-TGA7xx_(en-en)_0623_ver301.pdf 4 6/23/2021 6:48:18 PM

For your safety
To prevent severe injury and loss
of life/property, read this section
carefully before using the product
to ensure proper and safe
operation of your product.
WARNING
Power connection
RUse only the power source
marked on the product.
RDo not overload power outlets
and extension cords. This can
result in the risk of fire or
electric shock.
RCompletely insert the AC
adaptor/power plug into the
power outlet. Failure to do so
may cause electric shock and/
or excessive heat resulting in a
fire.
RRegularly remove any dust, etc.
from the AC adaptor/power plug
by pulling it from the power
outlet, then wiping with a dry
cloth. Accumulated dust may
cause an insulation defect from
moisture, etc. resulting in a fire.
RUnplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These
conditions can cause fire or
electric shock. Confirm that
smoke has stopped emitting
and contact us at http://
shop.panasonic.com/support
RUnplug from power outlets and
never touch the inside of the
product if its casing has been
broken open.
RNever touch the plug with wet
hands. Danger of electric shock
exists.
Installation
RTo prevent the risk of fire or
electrical shock, do not expose
the product to rain or any type
of moisture.
RDo not allow the AC adaptor or
telephone line cord to be
excessively pulled, bent or
placed under heavy objects.
Operating safeguards
RUnplug the product from power
outlets before cleaning. Do not
use liquid or aerosol cleaners.
RDo not disassemble the product.
RDo not spill liquids (detergents,
cleansers, etc.) onto the
telephone line cord plug, or
allow it to become wet at all.
This may cause a fire. If the
telephone line cord plug
becomes wet, immediately pull
it from the telephone wall jack,
and do not use.
For assistance, please visit http://shop.panasonic.com/support 5
Important Information
KX-TGA7xx_(en-en)_0623_ver301.pdf 5 6/23/2021 6:48:18 PM

CAUTION
Installation and location
RNever install telephone wiring
during an electrical storm.
RNever install telephone line
jacks in wet locations unless the
jack is specifically designed for
wet locations.
RNever touch uninsulated
telephone wires or terminals
unless the telephone line has
been disconnected at the
network interface.
RUse caution when installing or
modifying telephone lines.
RThe AC adaptor is used as the
main disconnect device. Ensure
that the AC outlet is installed
near the product and is easily
accessible.
Important safety
instructions
When using your product, basic
safety precautions should always
be followed to reduce the risk of
fire, electric shock, and injury to
persons, including the following:
1. Do not use this product near
water for example, near a
bathtub, washbowl, kitchen
sink, or laundry tub, in a wet
basement or near a swimming
pool.
2. Avoid using this product during
an electrical storm. There may
be a remote risk of electric
shock from lightning.
3. Do not use this product to
report a gas leak in the vicinity
of the leak.
4. Use only the power cord
indicated in this manual. Check
with local codes for possible
special disposal instructions.
SAVE THESE INSTRUCTIONS
For best
performance
Environment
RKeep the product away from
electrical noise generating
devices, such as fluorescent
lamps and motors.
RThe product should be kept free
from excessive smoke, dust,
high temperature, and vibration.
RThe product should not be
exposed to direct sunlight.
RDo not place heavy objects on
top of the product.
RWhen you leave the product
unused for a long period of
time, unplug the product from
the power outlet.
6For assistance, please visit http://shop.panasonic.com/support
Important Information
KX-TGA7xx_(en-en)_0623_ver301.pdf 6 6/23/2021 6:48:18 PM

RThe product should be kept
away from heat sources such
as heating devices, cooking
appliances, etc. It should not be
placed in rooms where the
temperature is less than 0 °C
(32 °F) or greater than 40 °C
(104 °F). Damp basements
should also be avoided.
Routine care
RWipe the outer surface of the
product with a soft moist
cloth.
RDo not use benzine, thinner, or
any abrasive powder.
Other information
RThe applied nameplate is
located at the bottom or rear of
the product.
Notice for product disposal,
transfer, or return
RThis product can store your
private/confidential information.
To protect your privacy/
confidentiality, we recommend
that you erase information such
as call block list or caller list
entries from the memory before
you dispose of, transfer, or
return the product.
Notice
Specifications
RPower source:
120 V AC, 60 Hz
RPower consumption:
Standby: 0.5 W
Maximum: 1.8 W
ROperating conditions:
0 °C – 40 °C (32 °F – 104 °F),
20 % – 80 % relative air
humidity (dry)
For assistance, please visit http://shop.panasonic.com/support 7
Important Information
KX-TGA7xx_(en-en)_0623_ver301.pdf 7 6/23/2021 6:48:18 PM

Setting up
Connections
Connect the AC adaptor to the unit by pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power outlet.
Connect the telephone line cord for your external phone (not
supplied) to the unit ("LINE IN" port), then to the single-line
telephone jack (RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL
service.
Connect the supplied telephone line cord to the unit ("PHONE" port),
then connect to your external phone.
Note:
RUse only the supplied Panasonic AC adaptor PNLV226.
LINE IN PHONE
To external phoneTo single-line telephone jack (RJ11C)
3
4
5
41 6
6
2
1
8For assistance, please visit http://shop.panasonic.com/support
Getting Started
KX-TGA7xx_(en-en)_0623_ver301.pdf 8 6/23/2021 6:48:18 PM

Note when setting up
Note for connections
RThe AC adaptor must remain
connected at all times. (It is
normal for the adaptor to feel
warm during use.)
RThe AC adaptor should be
connected to a vertically
oriented or floor-mounted AC
outlet. Do not connect the AC
adaptor to a horizontally
oriented AC outlet that faces
the floor, such as an AC outlet
installed on a ceiling or under a
table, as the weight of the
adaptor may cause it to become
disconnected.
Controls
C
G
H
D
E
AB
F
Ringer indicator
Display
MBLOCK LISTNMDN*1
MCALLER LISTNMCN*1
Speaker
MBLOCK CALLN
MERASENMEXITN
MMENUNMOKN
*1 MDN, or MCN: Scroll through
various list and items.
Display icons/
Indicator
Display items
Item Meaning
The line is in use by
your external phone.
Blocked call (page 12)
Allowed call (page 14)
Ringer indicator
Status Meaning
Green
Flashing
The call is being
received and it
matches a phone
number stored in
the allow list.
For assistance, please visit http://shop.panasonic.com/support 9
Getting Started
KX-TGA7xx_(en-en)_0623_ver301.pdf 9 6/23/2021 6:48:18 PM

Status Meaning
Red
Flashing
The call is being
received and it is
not matched a
phone number
stored in the call
block list and
allow list.
Red On
(5 seconds)
MBLOCK CALLN
is pressed when
receiving
incoming call.
Language setting
You can select either “English”
or “Español” as the language
used for the following features.
– Display
– Talking Caller ID announcement
The default setting is “English”.
1MMENUN
2MbN: “Language” a MOKN
3MbN: Select the desired setting
a MOKN a MEXITN
10 For assistance, please visit http://shop.panasonic.com/support
Getting Started
KX-TGA7xx_(en-en)_0623_ver301.pdf 10 6/23/2021 6:48:18 PM