Panasonic Diga DMR-EX75EB User manual

What is Q Link?
Q Link enables you to connect this unit to a Q Link- Q Link (registered trademark of Panasonic)
equipped Panasonic TV and perform various linked Easy Link (registered trademark of Philips)
functions.
The following systems from other manufacturers have SMARTLINK (registered trademark of Sony)
similar function to Q Link from Panasonic. DATA LOGIC (registered trademark of Metz)
For details, refer to your television’s operating
instructions or consult your dealer. Megalogic (registered trademark of Grundig)
Please check and identify the supplied accessories.
Use numbers when asking for replacement parts.
(Product numbers correct as of March 2006.
These may be subject to change.)
Accessories
Remote Control
EUR7659YG0
AC Mains Lead
RJA0044-3C or
K2CT3CA00004
For use with this unit only.
Do not use it with other equipment.
Also do not use the cords for other
equipment with this unit.
Batteries for the
Remote Control
R6 size
Audio/video cabel
K2KA6BA00003
2x RF coaxial cables
(black)
(K1TWACC00001)
1x RF coaxial cable
(grey)
(K1TWACA00001)
R6/LR6, AA
Insert the batteries
into the remote control
Scart
What kind of input terminal does your television have? Required cable(s) Page No. for
connections
Page No. for
TV settings
Highly recommended connection.
>You can enjoy high-quality RGB video from this unit
by connecting to an RGB compatible television.
>If your television has the Q Link feature, you can use
a variety of useful functions.
Fully wired 21-pin
Scart cable 2, 3 4
These terminals provide a purer picture than the
S Video terminal.
>If your television is compatible with progressive
scan, you can enjoy high-quality progressive video.
If you have a progressive compatible CRT television,
we cannot recommend this connection as some
flickering may occur.
Component video
S Video
Audio/video The most basic connection.
This terminal achieves a more vivid picture than
the video terminal.
3 Video cables
S Video cable
Audio/Video cable
(included)
4
60
(Operating Instructions)
62
(Operating Instructions)
(Operating Instructions)
62
DELETE
DISPLAY
PAGE
G
U
I
D
E
F
U
N
C
T
I
O
N
S
VOLUME
CH
CH
AV
DRIVE
SELECT
TV
DVD
PLAY/ PAUSESTOP
SKIP SLOW/SEARCH
3
2
1
6
54
9
8
7
0
INPUT
SELECT
REC EXTLINK RECMODE
STTLTEXT
CHAPTER
CREATE
MANUALSKIP
DIRECTTV REC
RETURN
SUBMENU
PROG/CHECK
TIMESLIP
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
VIDEOPlus+
ENTER
OK

2
This unit’s rear panel
4AC mains lead (included)
Connect only after all other
connections are complete.
To household mains socket
(AC 220 V to 240 V, 50 Hz)
After completing the above connections, proceed to
the Auto-Setup to tune in TV channels.
RF IN AV IN
Television’s rear panel
4
To household
mains socket
RF coaxial cable
(included, black)
2
Fully wired 21-pinScart cable
3
4
1
2
3
4
Connect the aerial to RF IN
(Aerial input) of the DVD Recorder.
Connect RF OUT (Aerial output) of the DVD
Recorder with the aerial input of the TV.
Connect the AV1 terminal (21-pin Scart terminal) of
the DVD Recorder with the Scart input of the TV.
Connect the DVD Recorder and the television to the
household mains socket.
Before connection, turn off all connected equipment and read the appropriate
operating instructions.
Choose from one of the connection types A-B that suits your requirement.
Use of the supplied RF coaxial cable
To prevent interference patterns from appearing on your TV, use only the supplied
RF coaxial cables when you connect this unit to your TV and aerial outlet or aerial
cable and Satellite receiver, as shown in connection types A-B.
!Keep the RF coaxial cables as far away as possible from other cables.
!Do not roll up the RF coaxial cables.
(Operating Instructions)
3
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD
You can use a variety of Q Link
functions by connecting the unit to
a Q Link compatible television.
You can enjoy high-quality viewing by connecting
the unit to an RGB compatible television.
Basic connections
Connecting to a television only A
To the aerial To this unit
Use one of the included RF coaxial cable (black or grey) to connect this unit’s RF IN terminal to your aerial socket or aerial cable.
RF coaxial cable (included, grey)
RF coaxial cable (included, black)
or
1
1
Connection with 21-pin Scart cable (not included)
The RF cable cannot be used
for showing pictures from the
DVD Recorder. The unit must
be connected by another
means e.g. Scart cable to
show pictures from the DVD
Recorder on the television set.
59
(Operating Instructions)

3
After completing the connections,
proceed to the TV Tuning on Page 4.
Auto Setup
View / record satellite programmes
Press INPUT SELECT to select the
input channel AV2 or put this unit in
standby mode.
To record satellite programmes refer
to “Timer Recording from Sat with
VIDEO Plus+”. 22
(Operating Instructions)
AV OUT
RF OUT
LNB IN
6
To household mains socket
RF IN AV IN
Television’s rear panel
This unit’s rear panel
Satellite receiver’s
rear panel
Fully wired 21-pin Scart cable
4
6
To household mains socket
RF coaxial cable
(included, black) 3
RF coaxial cable
(included, black)
2
Fully wired 21-pin
Scart cable
5
Connecting to a television and satellite receiver B
6
AC mains lead (included)
Connect only after all other
connections are complete.
To household mains socket
(AC 220 V to 240 V, 50 Hz)
RF IN
1
You can use a variety of Q Link
functions by connecting the unit to
a Q Link compatible television.
The RF cable cannot be used
for showing pictures from the
DVD Recorder. The unit must
be connected by another
means e.g. Scart cable to
show pictures from the DVD
Recorder on the television set.
59
(Operating Instructions)

4
RETURN
Owner ID
RETURN: leave
* * * *
PIN number
Name
House No
Postcode
DVB Auto-Setup
Please wait ! Ch 21 68
Prog.
Quality
Channel Service Name
Net ID
TS ID
1 23 BBC ONE 12302 12289 9
2 23 BBC 12302 12289 9
RETURN
Download from TV with Q Link
If your television is equipped with the Q Link feature, it will start to
download TV tuning information to this unit. In order to be able to use
Q Link, the unit must be connected to a TV with Q Link or a similar
feature via a fully wired 21-pin Scart cable.
The auto setup tunes in all available analogue television stations.
This takes approx. 5 minutes.
RETURN : to cancel
Datenübernahme von TV
Analogue Auto-Setup in progress.(without Q Link)
Download in progress.(with Q Link)
Checking Broadcaster's data.
(with Q Link)
1
Analogue Auto-Setup in progress. Please wait.
RETURN : to cancel
Download in Progress. Please wait.
RETURN : to cancel
Checking Broadcaster's data. Please wait.
RETURN : to cancel
You can complete the Owner ID now. To skip this step and do it later,
press the RETURN button. Your DVD Recorder is now ready to use.
You can later set the Owner ID in the Setup Menu.
!To enter the Owner ID, press ENTER.
!Press . To set the Owner ID now, use to enter a four-digit
PIN number.
Press to correct the digit.
!Make sure that you will remember the PIN number (make a note of it).
!Press the ENTER button to confirm.
!Select [Yes] with and confirm with ENTER.
!Press . Enter the [Name], [House No] and [Postcode] in the same
way, using .
!Press the ENTER button to confirm each entry.
!Press the RETURN button to leave the Owner ID screen. You will now
see the TV picture. Your DVD Recorder is now ready to use.
09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09 09
Depending on different countries or regions, the digital TV programme has
its own selection of operating frequency channels, frequency bands,
transmission parameters and frequencies. The unit automatically searches
for all available digital stations.
You can repeat the station search again.
2
(Operating Instructions)
58
(Operating Instructions)
53
(Operating Instructions)
45
Checking Broadcaster's data (with Q Link)
Once the station data have been adopted from the television set,
the analogue stations are sorted accordingly.
You can repeat the station search again.
Setting the date and time ()
If the Date and Time are not transferred via a television station,
the Clock menu appears.
!Set the clock manually.
if not found automatically
An incorrect date or time affects the programmed recording of
television programmes (note summer and winter time).
or
3
Analogue Auto-Setup (without Q Link)
Auto-Setup
Off
Clock
Automatic
Please set the clock manually.
ENTER : store RETURN : leave
ENTER
CHANGE
RETURN
Time Date
10 52 04 20 03 2006: : / /
Owner ID
You now have the opportunity
to enter your details and
help the police crack crime
see instruction book.
ENTER RETURN
DVB Auto-Setup (Tuning digital channels)
Auto-Setup (Tuning analogue channels)
Owner ID
Auto setup for your unit is complete. The availability of stations may differ
regionally. You can now select your favourite stations and store them
in the required order in the profiles.
(Operating Instructions)
44
(Operating Instructions)
45 46
Automatic setup of the unit
After being switched on for the first time, the unit proceeds with an
automatic station search for digital channels. This is followed by the search
for analogue channels.
!Switch the unit on using the Standby/on-switch.
!Turn on the television and select the AV input that this unit is connected to.
(Operating Instructions)
52