Panasonic EH-NA95 User manual

1
Operating Instructions
(Household) Hair Dryer
Model No. EH-NA95
Manual writing
1733117 Kana Matsusaka

2
Contents
1. Safety precautions
2. Parts Identification
3. How to use the hair dryer
4. Maintenance of the hair dryer
5. Troubleshooting
6. Specifications

3
1. Safety precautions
To reduce the risk of injury, loss of life, and damage of equipment, always observe the
following safety precautions.
Explanation of symbols
The following symbols are used to classify and describe the level of hazard, injury, and
property damage caused when the denotation is disregarded and improper use is
performed.
WARNING
Denotes a potential hazard that could result
in serious injury or death.
CAUTION
Denotes a hazard that could result in minor
injury.
The following symbols are used to classify and describe the type of instructions to be
observed.
This symbol is used to alert users to a specific operating procedure that
must not be performed.
This symbol is used to alert users to a specific operating procedure that
must be followed in order to operate the unit safely.

4
WARNING
Do not use when the power plug or cord is damaged or hot.
- Doing so may cause burn, electric shock, or fire due to a short circuit.
Never use this hair dryer if the power plug fits loosely in a household
outlet.
- Doing so may cause burn, electric shock, or fire due to a short circuit.
Do not damage or modify, or forcefully bend, pull, or twist the cord.
Also, do not place anything heavy on or pinch the cord.
-Doing so may cause electric shock or fire due to a short circuit.
Do not use with the cord bundled.
- Doing so may cause fire or electric shock.
Do not leave the area with the main switch turned on.
- Doing so may cause fire.
Do not connect or disconnect the power plug to a household outlet with a
wet hand.
- Doing so may cause electric shock or injury.
Do not use this hair dryer with a wet hand.
- Doing so may cause electric shock or fire due to a short circuit.
Do not use in proximity of flammable materials (such as alcohol, benzine,
thinner, spray, hair care product, nail polish remover).
- Doing so may cause an explosion or fire.
Do not store this hair dryer in a bathroom or location with high humidity.
Also, do not place in a location where water may spill (such as top of a
vanity).
- Doing so may cause electric shock or fire.
Do not immerse this hair dryer in water.
Do not use this hair dryer in the bathroom or location with high humidity.
- Doing so may cause electric shock or fire.
Do not wrap the cord tightly around the main body when storing.
- Doing so may cause the wire in the cord to break with the load, and
may cause electric shock or fire due to a short circuit.

5
WARNING
Do not block, or insert hair pins or other foreign objects into the air inlet,
air outlet, or nanoe outlet.
- Doing so may cause fire, electric shock, or burn.
Do not store within the reach of children or infants.
Do not let them use it.
- Doing so may cause burn, electric shock, or injury.
Never modify, disassemble, or repair.
- Doing so may cause ignition or injury due to abnormal operation.
Contact an authorized service center for repair.
Regularly clean the power plug to prevent dust from accumulating.
- Failure to do so may cause fire due to insulation failure caused by
humidity.
Disconnect the power plug and wipe with a dry cloth.
Immediately stop using and remove the power plug if there is an
abnormality or failure.
- Failure to do so may cause fire, electric shock, or injury.
<Abnormality or failure cases>
•Air is not emitted
•Unit stops sporadically
•Interior becomes red hot and smoke is emitted
- Immediately request inspection or repair at an authorized service
center.
Disconnect the power plug by holding onto it instead of pulling on the cord.
- Failure to do so may cause the wire in the cord to break, and may cause
burn, electric shock, or fire due to a short circuit.
When you see sparks around the air outlet while using the hot air setting,
stop use and remove the lint on the air outlet and air inlet.
- Failure to do so may cause burn or fire.
Fully insert the power plug.
- Failure to do so may cause fire or electric shock.

6
WARNING
Always ensure the appliance is operated on an electric power source
matched to the rated voltage indicated on the appliance.
- Failure to do so may cause fire, electric shock, or burn.
Use the household outlet alone: do not use with an extension cord.
- Failure to do so may cause fire or electric shock.
Always turn OFF the main switch and disconnect the power plug from the
household outlet after use.
- Failure to do so may cause fire or burn.
When you feel pain or abnormality in your skin or body, stop using it
immediately.
- Failure to do so may cause troubles of skin and body

7
CAUTION
Do not drop or subject to shock.
- Doing so may cause electric shock or ignition.
Do not use with the air inlet damaged.
- Doing so may cause to get dangled your hair in the air inlet, which
could damage the hair.
Do not touch the air outlet, set nozzle, quick‑dry nozzle, and diffuser,
which will become very hot.
- Doing so may cause burn.
Do not use on children or infants.
- Doing so may cause burn.
Do not store the cord in a twisted state.
- Doing so may cause the wire in the cord to break with the load, and
may cause electric shock or fire due to a short circuit.
Only use for drying or styling human hair. (Do not use on pets, or to dry
clothing, shoes, etc.)
- Failure to do so may cause fire or burn.
Please keep a distance of over 3 cm between the air outlet and your hair.
- Failure to do so may result in your hair being burned.
Please keep your hair at least 10 cm away from the air inlet.
- Failure to do so may cause to get dangled your hair in the air inlet,
which could damage the hair.
Please make sure your fingers do not touch the joint when using or folding
or stretching the handle.
- Failure to do so may cause injury due to pinching your fingers
Please close your eyes when applying wind to your face in skin mode.
- Failure to do so may cause trouble of eyes.

8
2. Parts Identification
①Air outlet
②Platinum minus ion outlet
③nanoe outlet
④Mineral minus ion outlet
⑤Air inlet
⑥nanoe lamp
⑦Temperature indicator
⑧Temperature switching button
⑨nanoe charge panel
⑩Handle
⑪Ring for hanging
⑫Bushing
⑬Cord
⑭Power pulug
⑮Main switch
TURBO : Strong airflow
DRY : Slightly strong airflow
SET : Gentle airflow

9
Switching the mode by Temperature switching button
Switch indication or lamp lighting
Mode or function explanation
“HOT”is selected when turn on the power.
Warm air
Blow warm air.
Warm air Cold air
Warm and cold air rhythm
Detect ambient temperature and
alternately blow hot / cold air at
optimal intervals.
TURBO or DRY SET
Cold air
(When TURBO or DRY)
Blow cold air.
Skin (When SET)
Blow weak cold air including 'nanoe'
which can handle skin care & mineral
platinum.
Scalp
Blow gently to skin temperature air.

10
3. How to use the hair dryer
Preparation
1. Wipe the moisture of the hair roughly with a towel
2. Comb the snarls out of hair with a brush.
3. Insert the power plug into a household outlet.
Dry hair
1. Select the airflow with the main switch.
2. Apply warm air to the whole hair.
3. Use “Warm and cald air rhythm”mode when the hair is almost dry.
4. Turn the power switch to “OFF”.
5. Pull out the power plug from house outlet.
6. Set the hair with a brush.
Care for moisture of the skin
1. Select “SET” with the main switch.
2. Select “COLD” with temperature switching button.
3. Please spout about 20 cm from the air outlet
4. Apply for about 1 minute while swinging the main unit side to side.
Gently dry to the skin
1. Select the airflow with the main switch.
2. Select “SCALP” with temperature switching button.
3. Dry the skin with brush the hair upward.
4. Select “HOT” with temperature switching button.
5. Apply warm air to the whole hair.

11
Set the hair
1. Get wet the hair.
2. Select “SET” with the main switch.
3. Select “HOT” with temperature switching button.
4. Apply warm air to straighten out the hair

12
4. Maintenance of the hair dryer
Maintaining the hair dryer
1. Soak the cloth in mixed the solid soap water.
2. Wring the cloth.
3. Wipe up the hair dryer with the cloth.
Maintaining air inlet
Remove any dust using some tissues.
Maintaining nanoe outlet
1. Prepare a clean swab.
2. Dampen the point of the swab with tap water.
3. A needle portion is located deep within the nanoe outlet.
Using the swab, rub this portion gently about 5 times.
Maintaining the air outlet
1. Insert the power plug into a house outlet.
2. Select “SET”, “DRY” or “TURBO” with the main switch.
3. Select “COLD” with temperature switching button.
4. Remove any dust using a swab.

13
5. Troubleshooting
Problem
Possible cause
Action
It often gets cold air
while using in “HOT”
mode.
Dust has attached on
the air inlet or air
outlet.
Hair or something is
blocking the air inlet.
Remove attached dust.
Do not block the air
inlet.
Sparks can be seen
within the hair dryer.
The hot air is
abnormally hot.
The power plug is
abnormally hot.
The connection to the
household outlet is loose.
Use a household outlet
that fits securely.
Sparks are generated
inside the nanoe outlet.
Abnormality caused by a
dirty electrode.
Maintain the nanoe.
The nanoe outlet emits a
noise outlet.
(crackling noise).
6. Specifications
Power source
AC100V 50-60Hz
Power consumption
1200W (When “TURBO”)
Air flow rate
1.3m3/min (When “TURBO”)
Warm air temperature
125℃(When “DRY”)
Cord length
1.7m
Weight
585g