Panasonic BL-C10A - Network Camera - Pan User manual

Operating Instructions
Please read this manual before using and save this manual for future reference.
Network Camera
Panasonic Network CameraWebsite: http://www.panasonic.com/netcam
for customers in the USA or Puerto Rico
Model No. BL-C10A

Operating Instructions
2
Main Features
Various remote monitoring features
• Pyroelectric infrared sensor*1 detects temperature differences caused by a
human body or animals.
• Detection can let camera transfer images by E-mail or TP*2.
• Color night view mode (auto-adjusted) enables the camera to display images
even in 1 lx illuminance*3.
Monitoring from PC or mobile phone
• The camera images can be monitored over the Internet.
• Pan/tilt operation can move the lens horizontally from -50 ° to +50 ° and
vertically from -40 ° to +10 °.
Privacy mode
• Privacy mode hides the lens into the unit to protect privacy.
• Pressing the privacy button on the front of the camera switches privacy mode
on or off with a single touch.
Easy installation using UPnP (Universal Plug and Play)
When connecting the camera with a UPnP enabled router, the camera
automatically configures its network settings.
*1 The sensor uses pyroelectric effect. Due to the effects of environment temperature, direct
sunlight or air conditioner, it may detect the temperature differences by mistake, or the
detection range may be shortened.
*2 It may take some time to transfer images depending on the network condition.
*3 1 lx is the brightness about 2.5 m (8.2 feet) away from auxiliary fluorescent light. Color night
view mode slows down the frame rate, and images may blur when viewing a moving object or
using the pan/tilt operation.
Privacy Monitoring Purpose
Privacy mode On Disabled Protecting privacy
Monitoring Off Enabled Remote monitoring
* Some UPnP enabled routers cannot configure the camera automatically. In
this case, the router needs to be configured manually. Ask the router
manufacturer how to configure it. See Panasonic Network Camera support
website at
http: panasonic.co.jp pcc products en netwkcam for more information.

Operating Instructions
[ or assistance, please call: 1-800-272-7033] 3
Supporting Viewnetcam.com service
Viewnetcam.com service allows you to access the camera over the Internet with
your favorite domain name (e.g. bob.viewnetcam.com) instead of a global IP
address.
Multi-Language Display
Top page, Single Camera and Multi-Camera page can be displayed inEnglish,
rench, German, Italian, Spanish, Russian, Simplified Chinese or Japanese. If you
select English or Japanese, all pages can be changed. But if you select other
language, the Setup, Maintenance and Support pages are displayed only in
English.
* Viewnetcam.com service is the service for Panasonic Network Camera. See
Viewnetcam.com website (http: www.viewnetcam.com) for more
information.

Operating Instructions
4
System Requirements for your PC
Your PC (Personal Computer) and network must meet the following technical
specifications for the camera to work properly.
Note
See Panasonic Network Camera support website at
http: panasonic.co.jp pcc products en netwkcam for the latest
information about web browser.
Trademarks
• Adobe and Acrobat are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
• Ethernet is either a registered trademark or a trademark of Xerox Corporation
in the United States and/or other countries.
• Microsoft, Windows, Hotmail and ActiveX are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
• Pentium is a trademark or registered trademark of Intel Corporation or its
subsidiaries in the United States and other countries.
• Screen shots reprinted with permission from Microsoft Corporation.
• All other trademarks identified herein are the property of their respective
owners.
Abbreviations
•UPnP
TM is the abbreviation for Universal Plug and Play.
• "Network Camera" is called "Camera" in this Operating Instructions.
Item Description
Operating
System
Microsoft® Windows® 98SE, Microsoft Windows 2000®
Microsoft Windows Me, Microsoft Windows XP
CPU Pentium® III (500 MHz or greater is recommended.)
Protocol TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
Interface 10/100 Mbps network card installed
Web Browser Internet Explorer 6.0 or later (Not included on the Setup CD-
ROM)

Operating Instructions
[ or assistance, please call: 1-800-272-7033] 5
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed to reduce
the risk of fire, electric shock, or personal injury.
1. Read and understand all instructions.
2. Keep these instructions.
3. Heed all warnings.
4. ollow all instructions.
5. After taking away the dust on the lens, wipe the lens with a cotton bud.
6. Do not install near any heat sources such as radiators, heat registers, stoves,
or other devices (including amplifiers) that produce heat.
7. Protect the AC adaptor cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the unit.
8. When you operate the camera, the power outlet should be near the camera
and easily accessible.
9. Do not touch the unit or the AC adaptor during lightning storms.
10. Unplug the unit when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required when
the unit has been damaged in any way, such as the AC adaptor cord or plug
is damaged, the unit does not operate normally, or has been dropped.
12. The camera is intended for indoor use only. Prolonged exposure to direct
sunlight or halogen light may damage CMOS sensor.
SAVE THESE INSTRUCTIONS
Network Camera Memo
Serial Number
(Found on the rear side of the main unit) MAC Address (Found on the rear side of the main unit)
Name and address of dealer
Date of purchase
For your future reference
Attach your purchase receipt here.

Operating Instructions
6
Table of Contents
1 Camera Monitoring .......................................................8
1.1 Accessing the Camera................................................................... 8
1.2 Viewing Single Camera page....................................................... 10
1.2.1 Bringing the Clicked Point to Center (Crick to Center) ............................ 12
1.2.2 Capturing a Still Image............................................................................. 13
1.2.3 Using Operation Bar ................................................................................ 14
1.2.4 Setting Home Position/Sensor Position/Preset Button ............................ 16
1.3 Viewing Multi-Camera page......................................................... 20
1.4 Viewing Buffered Image page ...................................................... 22
1.4.1 Deleting Buffered Images ........................................................................ 23
1.5 Viewing Still Images on Your Mobile Phone................................. 24
2 Various Camera Features ...........................................26
2.1 Using Camera eatures............................................................... 26
2.2 Connecting the Camera to Your Network .................................... 28
2.3 Using UPnP (Universal Plug and Play)........................................ 32
2.4 Registering with the Viewnetcam.com service............................. 33
2.5 Setting Date and Time ................................................................. 35
2.6 Changing Camera Settings.......................................................... 37
2.7 Changing Authentication Setting and Administrator User Name and
Password ..................................................................................... 41
2.8 Logging in to the Camera............................................................. 44
2.9 Creating, Modifying or Deleting General Users ........................... 45
2.10 Changing Initial Settings on the Single Camera page or the Multi-
Camera page ............................................................................... 47
2.11 Configuring Multiple Cameras...................................................... 49
2.12 Buffering or Transferring Images by Timer .................................. 51
2.13 Buffering or Transferring Images by Sensor ................................ 58
2.14 Specifying Operation Time........................................................... 67
2.15 Changing Indicator Display .......................................................... 69
2.16 Enabling Privacy Mode ................................................................ 70

Operating Instructions
[ or assistance, please call: 1-800-272-7033] 7
3 Camera Maintenance ..................................................71
3.1 Maintenance page........................................................................ 71
3.1.1 Confirming the Status .............................................................................. 72
3.1.2 Restarting the Camera ............................................................................ 72
3.1.3 Updating the Camera irmware .............................................................. 73
3.1.4 Creating Configuration ile...................................................................... 76
3.1.5 Loading Settings from a Configuration ile ............................................. 77
3.1.6 Resetting the Camera to actory Default ................................................ 78
3.2 Support page................................................................................ 79
3.2.1 Seeing Help page .................................................................................... 79
3.2.2 Seeing Product Information ..................................................................... 79
3.2.3 Seeing Support Information..................................................................... 80
3.3 ACTORY DE AULT RESET Button........................................... 81
3.4 Default Setting List....................................................................... 82
3.5 Cleaning....................................................................................... 88
3.5.1 Cleaning the Main Unit ............................................................................ 88
3.5.2 Cleaning the Lens.................................................................................... 88
3.6 Setting an IP Address on Your PC ............................................... 89
3.7 Using Setup Program................................................................... 90
3.8 Setting Your PC............................................................................ 92
3.8.1 Setting the Proxy Server Settings on Web Browser ............................... 92
3.8.2 Setting UPnP to Display Camera Shortcut in My Network Places .......... 95
3.8.3 Setting the Internet Temporary ile Setting on Web Browser.................. 95
3.9 ASCII Character Table ................................................................. 96
3.10 ile Size and Number of Buffered Images ................................... 97
3.11 Specifications............................................................................... 98
Index..................................................................................101

Operating Instructions
8
1 Camera Monitoring
1.1 Accessing the Camera
1. Start up the web browser on your PC.
2. Enter "http: IP Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
• When port number is 80 (default), you do not need to enter port number.
See page 30 for details about port number, and page 11 in the Installation/
Troubleshooting.
• If the Internet access to the camera is desired, the port number will be
changed in the order from 50000 to 50050. It is changed because some
ISPs block port 80.
Note
When [Prohibiting unregistered users] is set on the Security: Administrator
page, authentication window will be displayed. Enter the administrator's or the
general user's user name and password, and the Top page is displayed.
E.g. http://192.168.0.253
(or http://XXXXX.viewnetcam.com)

Operating Instructions
[ or assistance, please call: 1-800-272-7033] 9
3. Click the following tabs to display each page.
Note
When users other than an administrator are accessing the camera, [Setup]
and [Maintenance] tab will not be displayed. Additionally, When [Prohibiting
unregistered users] is set on the Security: Administrator page, [Login] tab will
not be displayed.
ATo Single Camera page (page 10) BTo Multi-Camera page (page 20)
CTo Buffered Image page (page 22) DTo Setup page (page 26)
ETo Maintenance page (page 71) FTo Support page (page 79)
GTo log in to the camera (page 44)
A B C D E F G
Select a language
to display.

Operating Instructions
10
1.2 Viewing Single Camera page
1. Access the camera (see page 8).
• The Top page is displayed.
2. Click the [Single] tab at the top of the page.
• When Security Warning window is displayed, see page 11.
3. Close the web browser.
Notes
• While viewing images under florescent lighting, the image may appear
noisy or experience flicker if the incorrect AC power setting was selected.
Select 60 Hz in the U.S. (see page 37).
• Refresh interval is [Motion] by default. You can change it on the operation
bar (see page 14).
• Refresh interval may change depending on the network condition, PC
performance and what object you view.
• When displaying video (Motion JPEG), the camera allows up to 20
simultaneous accesses. When trying more than 20 accesses, the 21st
user will see a gray screen. (Maximum 20 accesses for a Buffered Image
page too.)
• If the video (Motion JPEG) display is limited (see page 47), the video will
be changed to refreshing still images.
• To reduce the data traffic, the video can be automatically changed to
refreshing still images (see page 47).
• To display the Single Camera page directly, add it to the [ avorites] on the
web browser.
• Refresh interval may slow down depending on the network condition or
the number of accessing users.
• When viewing a dark image, Color Night View mode automatically starts.
The image will be brighter, but the refresh interval may slow down and
image quality may decrease.
Capture Image
Button
(see page 13)
Operation Bar
(see page 14)
Refresh Interval
(see page 14)
Click to Center
(see page 12)
Camera Image

Operating Instructions
[ or assistance, please call: 1-800-272-7033] 11
Security Warning window
To view a video (Motion JPEG), ActiveX® Controls must be installed. When trying
to display a video for the first time, Security Warning window will be displayed.
When using Windows 2000 or Windows XP, log in as an administrator to install it.
If you cannot install ActiveX Controls or you cannot see the video in the
Internet Explorer
• Click [Tools] [Internet Options] [Security] tab and click [Custom level] on
the web browser.
(1) Check "Prompt" in "Download signed ActiveX Controls".
(2) Check "Enable" in "Run ActiveX Controls and plug-ins".
• ActiveX Controls can be installed from the file on the Setup CD-ROM.
(1) Restart the PC.
(2) Confirm that Internet Explorer is closed.
(3) Double-click"ocx\ActiveXInst.exe" on the Setup CD-ROM.
Notes
• Video may not be displayed quickly. Wait for a while.
• If you use a proxy server, set the web browser not to access the proxy server
(see page 92).
• In some corporate network environments a firewall may be used for security
purposes. It is possible that this may prevent motion video from being
displayed. In this situation we suggest:
• Contact your network administrator.
• Try using regularly refreshed images.

Operating Instructions
12
1.2.1 Bringing the Clicked Point to Center (Crick to
Center)
When you click a certain point on the camera image, the point is centered on the
image.
1. Move the cursor to the desired point.
2. Click it.
• The clicked point is centered.
• See page 15 for the pan/tilt operation.
Notes
• When End Display appears on the operation bar, Click to Center does not
work beyond the pan/tilt end (see page 14).
• The clicked position may slightly miss the center depending on the lens
direction.
• If a user is restricted to level 1 or 2 on the General User page (see page
45), Click to Center does not work.
Cursor

Operating Instructions
[ or assistance, please call: 1-800-272-7033] 13
1.2.2 Capturing a Still Image
A still image can be saved on your PC.
1. Operate pan/tilt and select a resolution to display an image.
2. Click the capture image button.
• The camera image opens in another window.
3. Right-click the image, and select [Save Picture As...].
• Save as dialog box is displayed.
4. Specify the location, and click [Save].
• Camera image is saved at that location.
5. Click [Close].
Capture Image Button

Operating Instructions
14
1.2.3 Using Operation Bar
Note
When the camera image is not displayed correctly, click [Refresh] at the tool
bar on the web browser. The image will be refreshed.
End Display
and Preset
Display:
When the pan/tilt has reached the end (Left
End, Right End, Up End and Down End), End
Display appears. When clicking a preset button,
the preset name appears.
Pan Tilt
Scan: Moves the lens throughout the horizontal ( )
or vertical ( ) range, and returns to the original
position.
Pan Tilt
Home
Position:
Controls lens direction.
Pan ( : Left, : Right), Tilt ( : Up,
: Down) and Home Position ( : Center)
Preset
Button:
Applies the camera direction to a preset
position. You can preset 8 positions (see page
16—page 19).
Sensor
Position:
When the sensor detects a temperature
difference, the camera can be set up to turn to
this position. Only an administrator can operate
it (see page 16).
Brightness: Changes brightness in nine steps including
[STD] (Standard). Clicking [-] or [+] changes the
image brightness.
Refresh
Interval:
Sets a refresh interval. (Motion—60-second
interval)
Resolution: Selects [640 x 480] or [320 x 240] (default)
pixels.
Image
Quality:
Selects the image quality.
• [ avor Clarity] optimizes the image for good
clarity.
• [Standard] keeps the standard quality.
(default)
• [ avor Motion] optimizes the image for
motion display.

Operating Instructions
[ or assistance, please call: 1-800-272-7033] 15
Pan Tilt Operation
Pan Tilt Range
Note
Do not apply pressure to the pan/tilt portion of the camera. Any forced
movement can damage the internal mechanism.
Pan/tilt scan buttons automatically move the
lens horizontally from -50 ° to +50 ° and
vertically from -40 ° to +10 ° and return the
lens to the original position. Each pan/tilt
arrow moves the lens Up, Down, Right or
Left, and the home position button moves it to
the home position.
Pan/Tilt
Scan
Pan/Tilt

Operating Instructions
16
1.2.4 Setting Home Position Sensor Position Preset
Button
The home position, sensor position and 8 preset buttons can be registered. Preset
buttons (1—4) are registered 1: Upper Left, 2: Upper Right, 3: Lower Left and 4:
Lower Right. These buttons can be changed (see page 19).
• Registered buttons are shown in blue.
• Unregistered buttons are shown in white.
When clicking each button, the image switches to the home/sensor/preset position.
When restarted, the camera takes a home position. If the Lens Position When
Triggered setting is set (see page 59), the camera takes a sensor position after the
pyroelectric infrared sensor detects temperature differences.
Registering Home Position Sensor Position
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Click the home position button or the
sensor position button.
4. Click [Save].
• The bar switches to the operation
bar.
• Clicking [Back] takes you back to
the previous page.
Sensor
Position
Pan/Tilt
Program
Home
Position

Operating Instructions
[ or assistance, please call: 1-800-272-7033] 17
Registering a Preset Button
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Click a preset button (1—8) to register.
E.g.:
Setting "Middle" for the preset 5.
4. Enter the preset name.
• Maximum 15 characters.
• Enter ASCII characters (see page
96) or characters in each language.
But [Space], ["], ['], [&], [<] and [>]
are not available.
5. Click [Save].
• The bar switches to the operation
bar.
• Clicking [Back] takes you back to
the previous page.
Notes
• When registering preset buttons,
the camera also saves brightness
and white balance settings.
• Only an administrator can register
preset buttons.
Pan/Tilt
Setting
a name
The button
turns blue.
Preset
Preset
number

Operating Instructions
18
Viewing the Image
1. Click the home position, sensor
position or registered preset button.
• The camera takes each position,
and the image is displayed.
Sensor
Position
Pan/Tilt
Putting the
cursor displays
the preset
name.
Home
Position
UpperLeft

Operating Instructions
[ or assistance, please call: 1-800-272-7033] 19
Changing or Deleting the Settings
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Click the home position, sensor position
or a preset button (1—8).
4. Click [Save] after setting the preset
name or click [Delete].
• The bar switches to the operation
bar.
• Clicking [Back] takes you back to
the previous page.
Note
The home position or the sensor position
cannot be deleted, and these position
names cannot be changed either.
Pan/Tilt
Changing
the name
Preset
Preset
number
The deleted
button turns
white.
Sensor
Position
Home
Position

Operating Instructions
20
1.3 Viewing Multi-Camera page
To view multiple cameras on the Multi-Camera page, you need to configure each
camera on the Multi-Camera Setup page (see page 49).
1. Access the camera (see page 8).
• The Top page is displayed.
2. Click the [Multi] tab at the top of the page.
• Multi-Camera page can display up to 12 camera images.
3. Close the web browser.
Notes
• When selecting [All] at the View Type, all images are displayed in 160 x
120 pixels resolution.
• 640 x 480 pixels image cannot be displayed on the Multi-Camera page.
Capture Image Button (see page 13)
Switches cameras to
display.
Selects [320 x 240]
(default) or [160 x 120]
pixels resolution.
Selects a refresh interval
(Motion—60-second
interval). If you select [All]
at the View Type, video
(Motion JPEG) cannot be
displayed.
When clicking the camera
name, the Single Camera
page is displayed on
another window.