Panasonic CQ-VD5005U User manual

© 2007 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.
ORDER NO. ACED070201C7
C7
AUTOMOTIVE AFTERMARKET
CQ-VD5005U
CQ-VD5005L
In-Dash 7” Widescreen Color LCD Moni-
tor/DVD Receiver
TABLE OF CONTENTS PAGE PAGE
1 Service Navigation----------------------------------------------- 2
2 Specifications ----------------------------------------------------- 3
3 Features ------------------------------------------------------------- 4
4 Technical Descriptions----------------------------------------- 5
5 Disassembly and Assembly Instructions ---------------10
6 Block Diagram----------------------------------------------------12
7 Wiring Connection Diagram ---------------------------------15
8 Schematic Diagram---------------------------------------------16
9 Printed Circuit Board-------------------------------------------21
10 Exploded View and Replacement Parts List -----------28
11 Schematic Diagram for Printing with Letter Size-----44
All manuals and user guides at all-guides.com
all-guides.com

2
1 Service Navigation
1.1. About Lead Free Solder (PbF)
Distinction of PbF PCB :
• PCBs (manufactured) using lead free solder will have a PbF
stamp on the PCB.
Caution :
• Pb free solder has a higher melting point than standard sol-
der; Typically the melting point is 50 - 70°F (30 - 40°C)
higher. Please use a soldering iron with temperature control
and adjust it to 700 ± 20°F (370 ± 10°C). In case of using
high temperature soldering iron, please be careful not to
heat too long.
• Pb free solder will tend to splash when heated too high
(about 1100°F/600°C)
• This lead free solder will be used for the products after serial
No. 1,000,001.
1.2. Laser Products
1.3. Replacing the Fuse
Use fuses of the same specified rating 15 amps. Using different
substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse, could cause fire or damage to the stereo
unit.
1.4. Maintenance
Your product is designed and manufactured to ensure a mini-
mum of maintenance. Use a dry, a soft cloth for routine exterior
cleaning. Never use benzine, thinner or other solvents.
1.5. Notes
[RADIO BLOCK]
Do not align the AM/FM package block. When the package
block is necessary, it will be supplied already aligned at the fac-
tory.
[DVD DECK BLOCK]
This model has no servo alignment points because microcom-
puter controls the servo circuit.
All manuals and user guides at all-guides.com

3
2 Specifications
2.1. Specifications*
2.2. Dimensions
General
Power Supply DC 12V (11V - 16V)
Test Voltage 14.4V
Negative Ground
Current Consumption Less than 10A (during disc playback)
Maximum Power Output 45 W x 4CH
Power Output 18 W x 4CH
Compatible Speaker Imped-
ance 4 Ω
Video Input Signal Composite video signal, 1.0 Vp-p (75
Ω)
Audio Input Sensitivity 2 Vrms
Video Output Signal Composite video signal, 1.0 Vp-p (75
Ω)
Pre-Amp Output Voltage 2 Vrms
Pre-Amp Output Impedance Less than 600 Ω
Dimensions (W×H×D)** 178×50×165mm(7”×1-15/16"×6-1/2")
Weight** 2.4 kg {5 lbs. 5 oz.}
Front AV input (AV1 IN)
Input Impedance 47 kΩ
Allowable External Input 2.0 V
Connector 3.5 mm stereo mini pin (Equipped with
video input terminal)
Audio Input Sensitivity 2 Vrms
Video Output Signal Composite video signal, 1.0 Vp-p (75
Ω)
FM stereo radio
Frequency Range 87.9 MHz - 107.9 MHz
Usable Sensitivity 12.2 dBf
Stereo Separation 30 dB (at 1 kHz)
S/N ratio 62 dB
AM Radio
Frequency Range 530 kHz - 1710 kHz
Usable Sensitivity 28 dB/µV
Image Rejection Ratio 50 dB
Audio section
Output Voltage/Impedance 2 Vrms/600 Ω
Frequency Characteristics 20 Hz-20 kHz (±1 dB)
Dynamic Range 96 dB (during CD playback)
S/N ratio 95 dB (during CD playback)
Monitor
Liquid Crystal Panel 7” wide
Screen
Dimensions (W×H×D)** 154×87×177 mm (6-1/16”×3-7/16"×6- 15/16")
Number of Pixels 336 960 pixels (234 vertical ×480 hor-
izontal ×3)
Valid Pixel Ratio Over 99.99%
Display Method Transparent color filter format
Drive Method TFT (Thin Film Transistor) active
matrix format
* Specifications and the design are subject to possible modification
without notice due to improvements.
** Dimensions and Weight shown are approximate.
*** Above specifications comply with EIA standards.
All manuals and user guides at all-guides.com

4
3 Features
• Integration of the monitor, FM/AM radio, DVD Video/Video
CD player and CD/MP3/DivX player.
• Built-in AV Input/Output Terminals.
• SQ3 (3-Band Sound Quality).
• GUI (Graphic User Interface).
• Disc type auto-detection.
• Touch Panel Operation.
• DVD-R, DVD-RW Playback.
•IDcode.
• Differences Between 2 Models.
All manuals and user guides at all-guides.com

5
4 Technical Descriptions
4.1. Terminals Description
4.1.1. Main Block
IC601 ：
：：
：UPD70F32XXXB
Pin
No. Port Description I/O Vol (V)
FM AM DVD
1 AVREF0 Reference voltage for A/D
converter -3.33.33.3
2 AVSS Ground for A/D converter - 0 0 0
3 FREQ_CNT Output for control of fre-
quency of DCDC O1.51.51.5
4 TFT_RST RESET of TFT O 3.3 3.3 3.3
5 AVREF1 Reference voltage for A/D
converter -3.33.33.3
6 MONI_CNT TFT monitor power supply
control output O2.52.52.5
7 Touch_SW Switch output for touch
panel SW detection O2.82.82.8
8 IC/FLMD0 Flash memory update con-
trol -000
9 VDD +3.3V power supply - 3.3 3.3 3.3
10 REGC Bypass capacitor terminal
for voltage reg. -2.52.52.5
11 VSS Ground - 0 0 0
12 X1 Crystal osillator terminal for
Main I1.21.21.2
13 X2 Crystal osillator terminal for
Main -1.31.31.3
14 RESET System reset I 3.3 3.3 3.3
15 XT1 Crystal osillator terminal for
Sub I000
16 XT2 Not connected - - - -
17 X+ Transistor SW output for
touch panel X respect + pole O3.33.33.3
18 Y+ Transistor SW output for
touch panel Y respect + pole O3.33.33.3
19 X- Transistor SW output for
touch panel X respect-pole O00 0
20 Y- Transistor SW output for
touch panel Y respect-pole O00 0
21 INV_PWR Inverter power supply con-
trol output for monitor O3.33.33.3
22 D_SDA I2C clock 2 O 3.3 3.3 3.3
23 D_SCL I2C data 2 O 3.3 3.3 3.3
24 N.C. - - 0 0 0
25 RDS_DATA Not connected - - - -
26 RDS_CLK Not connected - - - -
27 LED_ON LED control for SW sub-
strate O3.33.33.3
28 REMO_DAT
AExternal remote control sig- nal input I3.33.33.3
29 REMO_OUT Remote control code output O 3.3 3.3 3.3
30 REQUEST I2C communication request
(DVD module) O0.10.10.1
31 NEJECT Output for compulsion eject O 3.3 3.3 3.3
32 LOADSW Loading SW I 0 0 0
33 EVSS Grand potential for external - 0 0 0
34 EVDD Positive power supply for
external -3.33.33.3
35 I2C_DATA I2C bus data output/ACK
detection O3.33.33.3
36 I2C_CLK I2C bus clock output O 3.3 3.3 3.3
37 BEEP Beep correspondence title
output O00 0
38 CN_DET1 Input 1 for connector con-
nection confirmation I000
39 PLL_CE Chip enable output for
PLL_IC communication O00 0
40 PLL_SI Cereal data input for PLL_IC
communication I3.33.33.3
41 PLL_SO Cereal data output for
PLL_IC communication O00 0
42 PLL_CLK Cereal clock output for
PLL_IC communication O3.33.33.3
43 E_SDA I2C clock 2 O 3.3 3.3 3.3
44 E_SCLK I2C data 2 O 3.3 3.3 3.3
45 MVR_DC PWM output for mechanism
control O3.73.73.7
46 PULSE Monitor start-up position
detection pulse signal input I5.15.15.1
47 DECK_RST Reset output of DVD module O 3.3 3.3 3.3
48 FRG_IN Input for frequency count of
DCDC I1.51.51.5
49 SRC_LED SRC button LED O 3.3 3.3 3.3
50 SRC_KEY SOURCE key detection I 3.3 3.3 3.3
51 SD Input for electric field
strength detection I5.25.24.5
52 SYS_MUTE System mute signal output O 0 0 0
53 PR4_SI Disc Chucking SW I 3.3 3.3 3.3
54 PR4_SO Inner Limit SW I 0 0 0.35
55 PR4_SCK 8cm Eject SW Output or
Forced Eject Input I/0 3.3 3.3 3.3
56 BATT_SENS
EBattery level detection I 3.3 3.3 3.3
57 ACC_SENS
EACC level detection I 5.4 5.4 5.4
58 PANEL_DET Input for Detatchapanel
detection I000
59 SYS_PWR System power control O 3.3 3.3 3.3
60 VideoSW1 SW1 for VideoSW switch O 3.3 3.3 3.3
61 VideoSW2 SW2 for VideoSW switch O 3.3 3.3 0
62 FAN_CNT FAN motor power supply
control O3.33.33.3
63 REVERSE Reverse detection I 3.3 3.3 3.3
64 EJECT_LED EJECT button LED O 0 0 0
65 SIDE_BRAK
EParking brake detection I 0 0 0
66 NC Insertion entrance LED con-
trol when 2Din opens O00 0
67 AMP_CNT Amplifier control output O 3.3 3.3 3.3
68 ANT_CNT Antenna control output O 3.3 3.3 0
69 BVSS Ground for bus I/F - 0 0 0
70 BVDD Power supply for bus I/F - 3.3 3.3 3.3
71 PUSH_SW Signal input for rotary SW I 3.3 3.3 3.3
72 ROTARY.1 Rotary encoder signal (VOL
UP) I3.33.33.3
73 ROTARY.2 Rotary encoder signal (VOL
DOWN) I3.33.33.3
74 INIT_DET_2 Destination detection 2 I 0 0 0
75 INIT_DET_1 Destination detection 1 I 0 0 0
76 FLMD1 - - 0 0 0
77 REMO_CUT External remote control out-
put stop signal output O00 0
78 HSD P.IC abnormality detection
check I3.33.33.3
79 AMP_STB Built-in power amplifier con-
trol output O00 0
80 AMP_MUTE Built-in power amplifier mute
output O00 0
81 FRAM_HOL
DNot connected - - - -
82 FRAM_CLK Not connected - - - -
83 FRAM_DO Not connected - - - -
84 FRAM_CS Not connected - - - -
Pin
No. Port Description I/O Vol (V)
FM AM DVD
All manuals and user guides at all-guides.com

6
85 FRAM_WP Not connected - - - -
86 FRAM_DI F_RAM cereal data input O 3.3 3.3 3.3
87 Tilt_LED Tilt button LED O 3.3 3.3 3.3
88 MA Mechanism control terminal
MA O3.33.33.3
89 MB Mechanism control terminal
MB O3.33.33.3
90 MC Mechanism control terminal
MC O3.33.33.3
91 CN_DET2 Input 2 for connector con-
nection confirmation I000
92 POSI_SENS
EMonitor position voltage sig- nal input I2.42.42.4
93 VSM Tuner S meter input I 2.2 1.3 1.1
94 AD_KEY1 AD_KEY input 1 I 3.3 3.3 3.3
95 AD_KEY2 AD_KEY input 2 I 3.3 3.3 3.3
96 AD_KEY3 AD_KEY input 3 I 3.3 3.3 3.3
97 XG Touch panel X respect-pole I 0 0 0
98 YG Touch panel Y respect-pole I 0.7 0.7 0.7
99 XR Touch panel X respect +
pole I000
100 YR Touch panel Y respect +
pole I0.70.70.7
Pin
No. Port Description I/O Vol (V)
FM AM DVD
All manuals and user guides at all-guides.com
all-guides.com

7
4.2. IC Block Diagram
4.2.1. Main Block
IC51 : C1BB00001045
IC201 : C1EA00000041
IC202 : C1BB00001132
IC381 : C1AB00000163
IC382 : C1AB00000084
IC604 : C0JBAC000390
IC701 : C0DAZHF00004
IC702 : C0DBAZC00010
All manuals and user guides at all-guides.com

8
IC703 : C0CBABC00160
IC704 : C0EBZ0000035
IC706 : C0DBCFG00003
IC710 : C0JBAZ000525
4.2.2. TFT Block
IC451 : C0DBAZA00017
IC452 : C0FBBD000065
All manuals and user guides at all-guides.com

9
4.2.3. DVD Servo Block
IC104 : YESAM370
IC105 : YESAM294
IC107 : YESAM364
IC301 : YESAM405
All manuals and user guides at all-guides.com

10
5 Disassembly and Assembly Instructions
5.1. How to Remove the Flexible PCB
Front Panel
Front Panel
FFC (CNP3)
Connector
Cover Plate
4. Disconnect the FPC Ass'y from CN452 on the TFT
PCB (E-9939A)
.
CN452
FPC Ass'y
CN707
Front Panel
Slide Mechanism
Ass'y
(Monitor Ass'y)
Monitor
Disassembly of Display Unit
. Remove the two screws( ) from the Front Panel.
2. After removing the screw ( ) from the bottom side, remove
the Connector Cover.
3. Disconnect the FFC (CNP3), which is connected to
the Front Panel, from CN707 on the Main PCB (E-3173Aa).
1. Pull out the Monitor to the arrow direction.
2. After removing the two screws ( ) and one screw ( ),
remove the Plate.
3. After removing the four screws ( ), remove the Monitor Ass'y.
4.Remove the Front Panel.
Front Panel Monitor
All manuals and user guides at all-guides.com

11
5.2. How to Disassemble & assemble
First take off the monitor block
and must be as shown above.
Remove the screws from the 3
spots as shown above labled with
circles.
Take off the metal that fixes the
connecter and remove the screws
from the 2 spots labled with circles.
Remove the screws from the
2spots labled with circles.
Must be situated as shown above
then remove the locks on the flat
cable of the deck.
Remove the deck block and it is
done.
How to assemble
How to disassemble
Insert the flat cable.
( aution for inserting diagonally)
With pad on the rear side of the deck
ass’y, there must me no gap between
the deck ass’y and the tuner shield case.
Match the connector bracket with the slit of the R A cord ass’y
and fasten them with 3 screws.
Do not let the ANT receptacle wires get jammed.
Importan
Importan
Match the mounting spots of the deck ass’y and fasten
them with 2 screws.
The deck ass’y must be inside the front plate of the under
cover.
Fasten the 2 parts labeled with a
circle with screws.
All manuals and user guides at all-guides.com
all-guides.com

12
6 Block Diagram
6.1. Main-1 Block
+
PA51
FM/AM TUNER
12
7
9
11
5
22 FM L-CH TU L
DVD L
R-CH R-CH
FM
DET
1
69
9
2435
126
1
24
23
25
10
11
12
13
4
28
141720
15 8 18 17 16
AM
X OUT
X IN
VT OSC IFC/ST REQ FM
PD
FM
IFC
ST REQ
FM
CONT
MONO
Q52
E SDA
E SCLK
BEEP
DO DI CLK CE SD
SDA
AVI L
SCL
S METER FM ST/MONO
13
19
E-3173A(1/2)
ANT51
X602
7.2MHz
Q56
LPF
IC51
PLL
CN252
AUDIO R
AUDIO L
DATA
DCLK
REQUEST
NRESET
NEJECT
5,14,15
16–18
19–22
6–9
VD OUT
2.5V
R-CH
DVD
DECK
SYS5V
SYS3.3V
VDD3.3V
DVD8V
IC706
31
2.5V
REG
DVD VD
AU9V
VDD5V
Q51
REG
REG
TU+B
IC703
64
22 DSDA
23 DSCL
30 REQUEST
47 DRESET
39 PLL CE
42
43 44 37
REM
FRQ CNT
29
3
REM CUT
77
REMO DATA2
REMO DATA
Q213 STBY
REMOTE
PRE FL
PRE RL
PRE FR
PRE RR
MUTE HSD
Q214
28
SYS MUTE
52
AMP STB
79
AMP MUTE
80
OFFSET DET
78
ACC SENS
57
ANT CNT
68 65
63
67
45
88
89
90
46
92
PLL CLK
93 VSM
51 SD
26 RDS CLK
25 RDS DATA
41 PLL SO
40 PLL SI
31 NEJECT
23
SEL FADER
22 3
9 11 1 13 17 15 19
R-CH
AV2-L
AV2-R
IC202
CAR RADIO PROCESSOR
LINE SEL
LOUDNESS,
VOLUME,
TONE
(T,M,B)
Q303
FL
RL
20
19 14
12
42225
21
2
6
4
FREQ
SHIFT
Q713
Q719,720
PWR
SW
BATT
BATT
9 VCC
2RT
15 SVP
IC702
DC/DC CONV
10
7Q706–708
ON/OFF
DRIVE SYS3.3V
Q710–712
ON/OFF
DRIVE SYS5V
59
IC601(1/2)
SYSTEM CONTROL
BUF
IC603
IC604
Q604 Q211
212
Q301
302
MUTE
CONT
R-CH
MUTE IC201
POWER AMP
CN160
(1/2)
CN701
FR+
FR-
RR+
RR-
FL+
FL-
RL+
RL-
AMP CNT
ANT CNT
REMOTE
R-CH
5
1
3
5
7
2
4
9
11
11
15
6
13
14
SIDE BRAKE 10
REVERSE 12
37
38
32
35
34
33
36
31
8
3
21
23
514
8
1
3
2
12
4
10
6
7
IC701
REGULATORS
SW5V
VDD5V
AU9V
DVD8V
Q721,724
Q703
Q705
Q722
723
AMP
CNT
MVR DC
ACC
SENS
ANT
CTRLCTRL
VCC
EXT
ACC
ILL10V
BATT
Q701,702
PWR
SW ACC
CHECK ACC
BATT PWR
SW
DC
ADJ
AU9V
Q725,726
Q615–617
SW+B
MVR DC
MA
MB
MC
PULSE
MA
MB
MC
PULSE
POSI SENSOR POSI SENSOR
SYS PWR Q612–614
INV
53
IC710
CN708
(2/2)
CQ-VD5005U/L MAIN(1/2)
PANEL
MOTOR
DRIVE
POWER
All manuals and user guides at all-guides.com

13
6.2. Main-2/TFT/SW Block
CN551 CN707
ENC PUSH
NRESET
ILL10V
VDD5V
15 15
3
2
2
1
16
10
13
12
11
7
5
4
20
17
8
20
17
8
11
7
5
4
16
10
13
12
3
2
1
1
E-9940A
SW552
SW559
RESET
SW551
PANEL
SW555
SRC
SW558
EJECT
SW557
FF
SW553
MUTE
SW554
SET-UP
SW556
REW
IC551
SW VDD PWR
SW
SW ILL 10V
AVI INV
A2 IN V CAMERA V VIDEO OUT V
AVI L
JK551
1
LIGHT
RECEIVE
V
RR-CH
L
REM DATA
DXD DV
357
55
9
3
1
1
24
AB
60 61
ILL 10V
PWR
SW
Q611,728
Q610,727
Q151,152
27 LED ON
95 AD KEY2
VSW2 VSW1
38 CN DET1
96 AD KEY3
64 EJECT LED
50 SRC KEY
49 SRC LED
58 PANEL DET
14 NRESET
72 VOL DOWN
73 VOL UP
71 PUSH SW
13 X2
12 X1
56 BATT SENS
62 FAN CNT
VDD5V
+
IC704
V
DET
45
IC704
BATT BATT
CHECK
X601
4.1943MHz
Q155,156
IC601
SYSTEM CONTROL
PWR
SW SYS5V
CN256
FAN VCC
1
FAN
E-3173A(2/2)
VDD3.3V
VDD3.3V
Q602(1/2)
Q602(2/2)
Q603(2/2)
Q603
(1/2)
CN708
(1/2)
Y+
Y+
YR
YG
Y-
X+
XR
XG
X-
YR
YG
Y-
Y+
YR
YG
Y-
TOUCH PANEL
X+
X-
TILT LED
TILT LED
I2C DATA
I2C CLK
XR
XG
X+
X-
XR
XG
18
100
98
20
7
17
99
97
19
AD KEY1
MONI CNT
RSTB 6 4
94
Q601
29
26
25
29
26
25
30
27
24
23
28
13
20
15
30
27
24
23
28
13
20
15
14 14
17 17
19
21
22
8
9
7
10
11
12
19
21
22
8
9
7
10
11
12
87
35
36
INV PWR 21
CN DET2 CN DET2
91
BATT PWR
SW
Q154,157
SYS5V SYS5V
SYS3.3V SYS3.3V
7
IC381
VIDEO
AMP
IC382
VIDEO SW
CN160(2/2)
IC802
EEPROM 5
5
6
6
7
1
2
332
2
1
14
17
4
TFT5V VDDA
INV+B
SDA
SCL
IC452
D/A CONV. IC451 DC/AC INVERTER
ENA
CAMERA
AV VIDEO
RSTB
STBY
SDA
SCL
DIM
RT
OVP
19
PDRA 20
NDRB 11
NDRD 12
PDRC
9
FB
29
21
12
30
TFT3V
SYS5V
Q502
Q501
LED
DRIVE
LED
DRIVE
28
SW503
DIMMER
SW502
TILT
SW501
OPEN/CLOSE
MONI CONT
40
4
47
8
CN452
CN902
12653487
TOUCH PANEL
E-9939A
SYS5V
SYS5V
SYS5V
SYS5V
Q404
ON/OFF
DRIVE
ON/OFF
DRIVE
ON/OFF
DRIVE
IC402
15
2.5V
REG TFT2.5V
TFT3.3V
TFT5V
CN901
3
23
16
5
1
17
29
24
21
20
19
7
13
10
9
18
8
27
28
25
14
30
IC401
DC/DC CONV.
EXT2
EXT3
VSW -10V
+15V
PWR
SW
Q403
Q401,402
IC801
VIDEO PROCESS
82 X801
27MHz
STHR
STHL
STVD
STVU
OEV
CKV
LRC
UDC
VR
VG
VB
XTALI
83
XTALO 49
STH1 50
STH2 44
OEH 52
CPH1 53
CPH2 54
CPH3 40
STV1 41
STV2 42
GOE 43
GCK 38
LR 39
68
65
62
45 6 1
3
UD
VCOM
FLICKER
LCD CONTROL
SIGNALS
TIMING
CONTROL
SYNC
SEP
SEL DEM
MATRIX
Q805–810
AMP
IC901
VCOM
DRIVE
INV+B
INV+B
Q451
Q452
T451 CN451
LV
HV
CQ-VD5005U/L MAIN(2/2) / TFT/ SW
LCD
BACKLIGHT
TFT
PANEL
Q405
All manuals and user guides at all-guides.com

14
6.3. DVD Servo Block
RESET
S5V
36
37
18
11
9
35
34
4
1
2
46
48
47
45
PWR
SW
FCO +
26
IC301
COIL/MOTOR DRIVE
FLASH
MEMORY SDRAM
23
FADR0-FADR20
FDT0-FDT15
CE,WE,OE
MA0-MA11
DQ0-DQ15
MCK,DQM1,BA0,BA1
AUDIO
Data
I/F
UP
I/F
DAC
1.2V
REG
HV -
HU +
HU -
W
V
U
SL02 +
SL02 -
SL01 +
SL01 -
49
50 LDO +
LDO -
CTL2
LDIN
TKO +
TKO -
FCO -
SW
SW
HFM
RF
TB
TA
TC
TD
F1
F2
IMON
CD VR
DVD VR
VCC5
T2
T1
CD LD+
DVD LD+ PWR
SW
COILU
SL2 +
SL2 -
SL1 +
SL1 -
FO+
TR+
LD +
LD -
TR-
FO-
HV -
HU +
HU -
COILW
COILV
IC102 IC103
3036-14-01
8
3 HV +
HV +
7
9
10
7
5
6
HB
HW +
HW -
VH -
HW +
HW -
3
VH +
4
5
6
15
16
13
14
11
12
17
18
19
20
CN201
30
29
28
27
23
P5V
1
22
21
18
16
14
12
10
9
8
7
6
5
4
2
1
OPTICAL
PICK-UP
Ass'y
81
91
80
129
130
126
124
86
114 137 138 135 136 133 134 123 125 87 162 163
84
72
181
183
173
156
77
78
4
167
169
168
166
NCSM,NRAS,NCAS, NWE,DQM0
IC101
RF AMP
DSP
DACCK
SRCK
ADOUT3
LRCK
MCLK
BICK
SDTI
LRCK
DAC-CSN
DAC-SDCK
DAC-SD0
DAC4OUT
IECOUT
VDI00
VDI02
REQUEST
NRST
1
2
3
4
6
7
8
11
10
CLK
251 RESETOUT PON 5
AOUT L
AOUT R
CN101
L-ch
R-ch
V OUT
IEC958
I2C-SDA (DATA)
I2C-SCL (DCLK)
REQUEST
IC106
RESET S5V
RESET
Q101
1.2V IC104,Q207 U2.5V
3.3V
S5V
P5V
P8V
S3.3V
S5V
P5V
P8V
X101
RF INP
VIN2 VIN1 VIN3 VIN4 VIN7 VIN8
LPC1 LPC2
DVR4
To
MAIN
BLOCK
16
18
13
11
13 NEJECT NEJECT 37
15 OSD OSD 40
31
30
29
28
19
20
21
22
23
24
25
26
27
36
32
33
34
35
SPINDLE
MOTOR
Ass'y
LD
MOTOR
CN202
DRIVEMUTE1
TRYDRV
INNERSW
VIN 10
VIN 9
LPCO2
LPCO1
HFM
Q202,205
Q201,206
LD IN
Q212
Q211
Q204
CQ-VD5005U/L DVD Servo Block
N RESET
IC105
AUDIO D/A CONVERTER
VIDEO
AMP
IC107
Q102
S5V
Q203
PWR
SELECT
INNERSW
SW3
SW1
SW4
SW2
SW6
12EJECT
8EJECT
DOWN SW
LOAD SW
DISC SW
66, 67, 73, 74, 75
All manuals and user guides at all-guides.com

15
7 Wiring Connection Diagram
DVD Deck
CN902 CN901
CN452
CN451
TFT P.C.B
[E-9939A]
30
30
18 1
1
12
CN160
CN252
MAIN P.C.B
[E-3173Aa]
CN708
402 391
CN701
19 1
20 2
CN707
20 1
140
CN551
SW P.C.B
[E-9940A]
1
19 2
20
TOUCH PANEL
LCD BACK LIGHT
To Slide
Mechanism Ass'y
CN256
1
3
FAN
Battery
Ground
Power (ACC)
Remote Out
Camera Input
(Yellow)
(Black)
(Yellow)
(R)
(L)
(R)
(L) Pre-Out Front
Video Out
Pre-Out Rear
External Amplifier Control Power
Side Brake (Parking Brake) Connection
Motor Antenna Relay Control
Reverse
Front SP
Rear SP
FPC Ass'y
CNP3
4/
4/
(Yellow)
(R)
(L) AV2-IN
Extension
Connector
Jig Part No.
YESFZS2071
ANT51
Radio Antenna
Connector
Power
Connector
18
16 9
DVD Servo P.C.B
[3036-14-01]
(Top View)
CN202
20P
CN101
40P
CN201
30P
CN301
20P
All manuals and user guides at all-guides.com

16
8 Schematic Diagram
8.1. Main-1 Block
All manuals and user guides at all-guides.com
all-guides.com

17
8.2. Main-2 Block
All manuals and user guides at all-guides.com

18
8.3. TFT Block
(C)
(C)
CQ-VD5005U/L
All manuals and user guides at all-guides.com

19
8.4. SW Block
CQ-VD5005U/L SW
All manuals and user guides at all-guides.com

20
8.5. DVD Servo Block
CQ-VD5005U/L DVD DECK
3036-14-01
IC301
YESAM405
Q201
YESAN144
Q102
YESAN140
Q202
YESAN144
Q205
YESAN137
Q206
YESAN137
Q203
YESAN139
Q212
YESAN138
Q211
YESAN138
Q204
TESAN147
IC107
YESAM364 IC105
YESAM294
Q207
YESAN145
IC104
YESAM370
IC106
YESAM407 Q101
YESAN140
IC103
YESAM406
IC102
D108
YESAD157
D104-D107
YESAD157
D104 D105 D106 D107
IC101
YESAM366
U2.5V
S3.3V
S3.3V
S3.3V
U2.5V
U2.5V
U2.5V
To MAIN E-3173Aa CN252
2V / DIV, 1ms / DIV
2V / DIV, 1ms / DIV2V / DIV, 1ms / DIV
2V / DIV, 1ms / DIV 1V / DIV, 1us / DIV
1V / DIV, 0.5ms / DIV
1V / DIV, 2us / DIV
50mV / DIV, 0.1us / DIV
20mV / DIV, 1ms / DIV
2V / DIV, 5ms / DIV
2V / DIV, 10us / DIV
1V / DIV, 1ms / DIV
1V / DIV, 0.2ms / DIV
1V / DIV, 0.2ms / DIV
1V / DIV, 5us / DIV
1V / DIV, 5us / DIV
1V / DIV, 5us / DIV
20mV / DIV, 50ns / DIV
1V / DIV, 2us / DIV
0 0 3.3 3.3 3.3 0 0 3.3 3.3 3.3 3.3 0 3.3 1.9 1.9 1.8 0 1.3 1 0.7 0.9 0.11 1.1 1 1.1 1 0 0.8 1 0 3.3 0.9 0 0 0 0 3.3 0 0 0 1.3 0.7 2.5 2.4 2.5 2.1 1.5 0 3.3 0 3.3 1.11 1.6 1.7 3.3 1.6 1.3 1.9 1.7 1.8
0
0
0
0
3.3 0
3.3
3.3
3.2 0
0
3.3
3.4
0
1.3
3.3
1.7
3.3
0
3.3
0
1.5
1.6
0
3.3
0
0
0
0
0
0
0
0
3.3
0.9
0
1.7
3.3
2.1
2.1
1.8
1.8
1.4
0
0.2
1.5
0.2
0
2.3
1.7
2.8
2.6 2.5 2.6 1.7 1.7 1.7 1.6
0
1.7 1.6 3.3
3.2 1.9
1 1
1.9
0
0.4
3.3
0
3.3
0
1.6 1.6
0
1.3 1.7 1.6 1.6
0
1.6
0
3.3
0
0
3.3 3.3
00
0 0
3.3
2.3
1.8
0
0
1.7
1.7
1.7
1.7
3.3
1.9
2.8 2.8 2.7 2.8 2.7 2.5
3.2
3.3
3.3
0
0
0
0
3.3
2.8
2.9
2.7
2.8
2.9
2.8
3.3
0
3
2.7
2.8
3.16
2.8
3
2.7
2.8
3.3
0
3
2.7
2.8
2.6
2.6
3.2
0
1.5
3.3
1.5
0
3.1
3.1
2.9
0
1.6
0
0
1.3
1.5
0
0
0
3.3
1.5
0.2
1.44
0.3
1.6
0
1.6
2.1
0
3.3
3.3
0
3.3
5.2
9.0
5.2
5.2
5.2
5.2
0
5.2
8.0
0
0
0
0
0
0
0
0
8.0
8.0
0
0
1.7
0
1.6
1.7 0.2
0.2
8.0
0.2
5.2
0
0
0
0.2
0.2
0
0
0
0
0
0
5.0
0
0
0
9.0
0
1.7
1.7
5.2
3.3 3.3
0
0
0
5.2
5.2
5.2
5.2
5.2 5.2
000
0
0
0
0
00
0
0
0
5.1
5.1
5.1
5.1
1.7
1.6
0
1.6
3.3
3.3
3.3
3.3
5.1
5.1
0
2.6
2.6
2.6
0
2.4
1.3
2.0
2.0
1.3
0
00
4.9
3.3
5.1
3.3
3.3
2.9
3.3
2.8
2.8
0
3.0
3.3
3.3
1.5
1.6
0
0.2
3.3
0.2
0.2
0.2
0.2
0
0.2
0
0
0.4
0.4
0.3
0.3
3.3
0
0.2
0
0.2
0.2
3.3
0.2
0.2
0
0.2
0.2
0.3
0.2
0
0.2
0.2
3.3
0.2
0.2
0.2
0.2
0
0
0
0
0.5
1.6
0.6
2.7
2.7
2.8
2.3
1.3
0.1
0
3.3
3.3
3.3
1.6
1.8
1.5
1.8
1.7
1.4
2.0
1.6
1.4
2.0
3.3
0
1.6
1.3
1.3
1.3
1.2
1.2
1.2
1.2
3.3
1.4
1.5
1.2
0.8
0.7
0.7
1.0
0.8
2.2
0
2.2
2.5
5V
5V
3.3V
3.3V
1.3V
3.3V
5V
5V
5V
5V
8V
8V
8V
5V
5V
5V
3.3V
3.3V
2.5V
2.5V
2.5V
3.3V
3.3V
3.3V
3.3V3.3V
3.3V
5V
8V
8V
1.3V1.3V
1.3V
3.3V
3.3V
3.3V
3.3V
8V
5V
5V
5V
3.3V
3.3V
5V
8V
8V
3.3V
3.3V
3.3V
3.3V
3.3V
3.3V
5V
3.3V
5V
5V 5V
3.3V
3.3V
3.3V
3.3V 3.3V
3.3V
5V 5V
5V
1.3V
1.3V 1.3V
1.3V
1.3V
8V
3.3V 3.3V
8V 8V
1.3V
2.5V
3.3V
5V
8V
1.3V
2.5V
3.3V
5V
8V
AUDIO (L,R)
VISUAL
The following symbols are
shown on the schematic
diagram.
L
R
L
R
All manuals and user guides at all-guides.com