Panasonic PT-65WX50 User manual

= p DE"
Panasonic
Color Video Projection System
Operating Instructions
PT-65WX50
For assistance, please call: 1-800-211-PANA (7262) or TQB2AA0343 |
email to: consumerproducts @ panasonic com PRINTED IN MEXICO

WARNING
To move set, push from left side of set. Casters on right side
do not pivot in all directions. Set can tip over if moved from
right side, with risk of personal injury.
ADVERTENCIA
Para mover el conjunto, empuje desde el lado izquierdo del
mismo. Los rolanas de la derecha no son pivotantes en todas
las direcciones. El conjunto se puede tumbar si se lo mueve
desde el lado derecho, corriendo asi el riesgo de sufrir dafos
personales.
Mise en garde
Lors du déplacement du téléviseur, le pouser sur son côté
gauche. Les roulettes du côté droit ne pouvant tourner dans
toutes les directions, l'appareil pourrait tomber s’il est poussé
de ce côté et causer ainsi des risques de blessure.
Ba
SHAR ARATE o HE Hehe o MEME -
Fa] ase HEE a] BERIGE OS Ho
Certain audio features of this product manufactured under a license from Desper Products, Inc.
Spatializer® and the circle-in-square device and trademarks owned by Desper Products, Inc.
Spatializer U.S. Patents are: 4,308,423; 4,355,203 and 5,412,731.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of electric shock do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrow Tha exclamation point within a
head within a triangle is triangle is intended to tell the
intended to tell the user that user that important operating
parts inside the product are a and servicing instructions are In
risk of elactric shock to persons. the papers with the appliance.
WARNING: To prevent fire or shock hazard, do not expose this appliance
to rain or moisture.

TABLE OF CONTENTS
Table of Contents
Congratulations .........ennnnnunnenessesersusreanoanersnnnnnnnnrossssss 3
Cüstómër Racord siian 3
Gare and Cleaning aniniorurnn a SES AUS EDEN REESE ENES 3
DPRCIICAUONS versare aa a 3
NSU ATOM niiina aie ai 4
Television LOCATON ao aa ere 4
Optional Cable Connections.............. cc cccesessssecerseseseeneessesseesseees 4
AC Power Supply Cord ..........cccsccccscccstsccssscecscacsnsssecessseesscnsacers 4
Cable / Antenna Connections ...............ccceseccceccueeseceessensesaneceess 4
Optional Equipment Connections. ...........cceccscsesseees 5
VCR GOMOCHON ossis neau a 5
PODLA INPUT UACKS ania aana a Ea 6
Cable Box CONNÉCHON 3 ro er aaa 6
VCR and Cable Box Connection ............ccccssccsssscreccsesseseceeseneeee 7
Amplifier Connection (To Audio AMmp).....................::ssesseesesesees 8
Program Out Connection (PROG. OUT)............::cccssssrsessseccenes 8
Digital TV Set-Top Box (DTV-STB) Connection.....9
Home Theater Connection................sccscccssssnesseronee 10
Split Screen Operation..............ccsssccccssssccsscesssererees 11
Without a VOF css araneus aaa A 11
With a VCR and Cable Box... cccccccrectecessaseuseassuarees 11
With a VCR - No Cable BOX ......... cc esccsstsssssncsecsessesessnrees 11
Remote Control........sesseesssessssenonnnnnnnenannuvosansssonnaessne 12
Quick Reference Functional Key Chart 13
Programming The Remote...............-::sscssccsseserseonee 16
Component Codes...........ccsscsesserscecsecssenssenaesenesecense 17
Roller Guide WMenu..............sccssssccccersecscnsesencnnsssncesee 21
Basie NAVIGANOM sivisscecceecdecdscc casic naoa TEE aaas 21
Roller Guide Menu Chart .............c0:: ssesesenccecsseaneees 22
Special Features ..........c.ccccssescerecscesussnersccceneereseneees 25
Menu CE QU EG SS cisions 0y5nsadesnviontadedbutentiweiteunedsesannaiueaintecs 25
Channel Programming ...........:ccccccsccccsscsscsesssescsucenersvsveecesnanens 25
Closed Captioning ............ccccccccccccccccscceccscessccerecesconsecnessausnaeens 26
Convergence AdjuStMent................cccccescessescsesessesssseessseeesees 27
SBOP TWO cisco seein a i aaia 28
TME CAN 2 nunaa a ES FEEDS RESEN TREE EEN, 28
Picture Adjustments ........asossensnueseresressrrenerssssssnnsnorevannrsrernonnas 29
AUTIO AUS ENS oiean i 29
Favorite Channels and Captions (…..sssesssserrsesreereereerrerresrene 30
OCW E SUSE SEERNES SENSE A E A AT E E ATT 31
Troubleshooting Chatt............sscccssscssctsesssercnssseneses 32
Read these instructions completely before operating TV.
Contents are subject to change without notice or obligation.
Copyright 2000 by Matsushita Electric Corporation of America. All rights reserved.
Unauthorized copying and distribution is a violation of law.

CONGRATULATIONS
Congratulations
Your new Projection Television (PTV) features state-of-the-art technology for high-
quality picture and sound with complete audio/video connections for your home
theater system. Standard television signals are displayed in a progressive scan
format, providing a clear, crisp picture without visible scan lines. This PTV is also DTV
(Digital TV) compatible. When connected to a Panasonic digital TV set-top box, this
TV can display high-definition (HDTV) 1080i and 720p formats and standard definition
(SDTV) 480p format. Your new PTV is designed to give you many years of enjoyment.
It was thoroughly tuned and tested at the factory for best performance.
Customer Record
The model and serial number of this product are located on the back of the TV. You
should note the model and serial number in the space provided and retain as a
permanent record of your purchase. This will aid in identification in the event of theft or
loss. Product registration is available at: www.prodreg.com/panasonic.
Model
Number
Number
Care and Cleaning
Protective Screen (Turn PTV Off)
The projection screen is a precision lens system and has a protective screen. The
protective screen is fully washable with the following precautions:
O Use a mild soap solution or window cleaner and a clean cloth.
e DO NOT USE ABRASIVE CLEANERS.
e Do not use laundry detergent or automatic dishwasher soap.
e Do not use alcohol, ammonia, or petroleum based products.
O Avoid excessive moisture and wipe dry.
e Prevent solution from running into the receiver below.
O Avoid bumping or scraping the screen.
Cabinet and Remote Control
O For cabinets and Remote Control, use a soft cloth dampened with water or a mild detergent
solution. Avoid excessive moisture and wipe dry.
O Do not use benzene, thinner or other petroleum based products.
Specifications
Power Source
PT-65WX50 (4.4A) 120V AC, 60Hz
Channel Capability - 181 VHF-12: UHF-56; Cable-125
4 Video Input 1Vp-p, 75 Ohm, Phono Jack Type
6 Audio Input (2 Component) 500mV RMS 47K Ohm
Specifications are subject to change without notice or obligation.

INSTALLATION
Installation
Television Location
This unit can be used as part of an entertainment center. Consult your dealer for available
options.
O Avoid excessive sunlight or bright lights, including reflections.
O Keep away from excessive heat or moisture. Inadequate ventilation may cause interna!
component failure.
O Fluorescent lighting may reduce remote control transmitting range.
O Keep away from magnetic equipment, including motors, fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
O Use 75-ohm coaxial shielded cables.
O Use appropriate input and output connectors that match your component connectors.
O Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT Polarized Plug
USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. t=
Cable / Antenna Connections
For proper reception, either a cable or antenna connection is required.
Cable Connection Incoming Cable from
i Cable Company
Connect the cable supplied by your local cable company to ANT1
connection on back of television. Select cable mode and ANT1 in SET UP iy
menu under Prog Chan (Program Channels). @ Cm
Note: A cable converter box may be required for proper reception.
Check with your local cable company for compatibility
requirements.
75 Ohm VHF/UHF
on back of TV
Antenna Connection
a For proper reception of VHF/UHF channels, an external antenna is required. For
best reception, an outdoor antenna ts recommended.
° Connect home antenna to back of television. Select TV
mode and ANT1 in the SET UP Menu under Prog Chan.
Incoming Cable from
X / Fa Home Antenna
SWS Cable Preset Qo
Cabte Mode is preset at the factory.
Antenna users must change to TV Mode and Pi
ANT1 in the Set Up Menu under Prog Chan.

INSTALLATION
Optional Equipment Connections
(S-VIDEO. OUT
ey I a G a ER l .e ‚aM
Ne ee |
r
©
ante * -
Incoming Cable
VCR Connection
Follow this diagram when connecting your television to a VCR only.
TERMINALS ON BACK OF TV
— ee ee ee ee ee ee ee
CABLES NOT SUPPLIED
Note: The remote control must be programmed with supplied codes to operate the VCR. See
Programming the Remote Control in this manual.
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Viewing a video cassette tape
Procedure
© Option A
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Begin the video.
O Option B
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channe! 3 or 4, depending on your VCR.
3. Begin the video.
Note: The S-VIDEO connection is optional and overrides other VIDEO connection.
Recording a television program
Procedure
[ Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channe! 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
O Option B (Recording one program while viewing another program)
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
Using the VCR, tune to the television program you want to record.
Begin recording.
Press the TV/ViDEO button on the remote control to switch back to regular television.
Tune the television to the television program you want to view.
om
eam

INSTALLATION
Optional Equipment Connections (Coni.)
Front A/V Input Jacks
Open the door on the PTV front panel to use the terminals for your optional
equipment. Press the TV/VIDEO button to select VIDEO 3 input mode.
TERMINALS ON FRONT OF TV
“OOOO
S-VIDEO VIDEO Layoot
Note: A second VCR, a video disc player, video game equipment and DSS equipment can also be
connected to the video inputs. See the optional equipment manual for details.
Cable Box Connection
Follow this diagram when connecting your PTV to a cable box only.
TERMINALS ON BACK OF PTV
PROG. INPUT
or fT}
+m @@®@®
VIDEO |
„w O © Og O
LO OO sO
AMP
i © | CABLE BOX
+O) ao
Note: The remote control must be programmed with supplied codes to operate the cable
box. See Programming the Remote Control in this manual.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium (scrambled) cable channel you want
to view.
Note: To use special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT1 must be selected in the SET UP menu
under Prog Chan (Program Channels).

INSTALLATION
Optional Equipment Connections (Cont.)
VCR and Cable Box Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
Panna TERMINALS ON BACK OF TV
j 1
a are ce oe een |
! : }
i @ RI
| AUD our I
|
©'
<b
!
| ole |
| eer CABLE BOX
l | |
| anrinpur | TANT OUTPUT | |
| ODO ; | |
l ANT ouTPUT! | ANT INPUT | i
i I [ ] Incoming Cabie
i © I I © l
EEEN —— CE wl be i, er — l
CABLES NOT SUPPUED
Note: The remote control must be programmed with supplied codes to operate the VCR and
cable box. See Programming the Remote Control in this manual.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium (scrambled) cable channel you want to view.
Note: To use special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT1 must be selected in the SET UP menu
under Prog Chan (Program Channels).
Recording a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Press the TV/VIDEO button on the remote control to select the input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Tum the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on your VCR.
5. Using your cable box, tune to the premium (scrambled) cable channel you want to
record,
6. Begin recording.
Note: To view a different channel while recording:
. Select ANT1 in the SET UP menu under Prog Chan (Program Channel).
e Press the TV/VIDEO button on the remote control to select TV mode.
s Tune the television to a television program (except another premium (scrambled)
cable channel).

INSTALLATION
Optional Equipment Connections (Cont.)
Amplifier Connection (TO AUDIO AMP)
Connect to an external audio amplifier input for listening through a stereo system.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
Select SPEAKERS ON located in the on screen AUDIO menu.
Set amplifier volume to minimum.
Adjust TV volume to desired level.
Adjust amplifier volume to match the TV.
Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu.
Volume, mute, bass, treble and balance are now controlled through the
television.
Note: Select SPEAKERS OFF & Fixed Audio Out to control audio functions through the
external amplifier.
Program Out Connection (PROG. OUT)
For monitoring the television audio and video with optional video equipment, connect
to PROG. OUT terminals on the back of the TV.
Procedure
1. Connect optional video equipment to PROG. OUT video and TO AUDIO AMP
R/L Audio terminals.
2. PROG OUT terminal display is the same as the on screen display.
3. See optional equipment manual for further instructions for recording or
monitoring.
PNAN
TERMINALS ON BACK OF TV
COMPONENT
SPEAKER INPUT j VIDEO INPUT
12} 50 W (DIN) MAX
Oo ©
CABLES NOT SUPPLIED

DIGITAL TV SET-TOP Box (DTV-STB) CONNECTION
Digital TV Set-Top Box (DTV-STB) Connection
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) to the
back of your TV.
DTV TERMINALS ON BACK OF TV
DTV TERMINALS ON BACK OF DTV-STB
l ian
S-VIDEO ©
w © © ©
l ba 0 O 0, 0 i E A O E
LOOO mO
|
CABLES NOT SUPPLIED
Note: There are two sets of component video inputs. Each has three video inputs, Y, Pg and
Pr- Separate component color inputs provide luminance and color separation. Use
component audio input I or 2 L (left) and R (right) for connecting to audio output of
Panasonic DTV-STB.

DIGITAL TV SET-TOP Box (DTV-STB) CONNECTION
Home Theater Connection
Your TV can be configured to use the TV speakers as center channel speakers in
Dolby” surround sound transmission. Connect a Dolby surround sound amplifier
to CENTER CHANNEL INPUT on the back of the TV, as shown. EXT & FAO
must be selected in the AUDIO Roller Guide™** Menu under SPEAKERS.
“U.S. Patent Pending
A TERMINALS ON BACK OF TV
| | — EDER |
E
|
| ej
(1) Push and hold [
down button. :
(2) Insert bare wire I
into hole and L
release button.
Dolby surround
Amplifier
oe
Left Front = Right Front
Speaker TV Speakers Speaker
Center Channel!
Left Rear Right Rear
Surround Speaker Surround Speaker
—
Listener DD
mh
*Manufactured under license from Dolby Laboratories. “Dolby”, “AC-3”, “Pro Logic” and the double-D symbol
are trademarks of Dolby Laboratories.

SPLIT SCREEN OPERATION
Split Screen Operation
This television includes a two tuner split screen feature. This allows watching two (2) live
broadcasts at the same time with or without an external video source (VCR).
Note: The Remote Control must be programmed with supplied codes to operate the VCR
and Cable Box. See Programming the Remote Control in this manual.
Without a VCR
Procedure
Connect incoming cable to antenna (ANT 1) input on back of TV.
Press the SPLIT C> button on the Remote Control to display the
Split Screen.
Note: The audio is for the Main Picture, only.
Choose channels for the Split Screen Picture by pressing the Remote Control
SPLIT CHANNEL up/down buttons.
Choose channels for the Main Picture by pressing the Remote Control CH up/
down buttons or by using the numeric keypad.
With a VCR and Cable Box
Procedure
Press the SPLIT @=> button on the Remote Control to display the Split Screen.
Note: The audio is for the Main Picture only.
To view scrambled channels through your Cable Box on the Split Screen:
Verify the Cable Box and VCR are ON and the VCR tuned to Channel 3 or 4,
depending on the VCR.
Press the TV/VIDEO button on the Remote Control to select the video input for
your VCR.
Press CBL button on the Remote Control to select cable box.
Choose channels for the Split Screen by pressing the SPLIT CHANNEL up/down
buttons on the Remote Control or by using the numeric keypad.
Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down buttons.
With a VCR- No Cable Box
Procedure
Press the SPLIT C> button on the Remote Control to display the Split Screen.
Note: The audio is for the Main Picture, only.
To view an external video source in the Split Screen:
Press the TV/VIDEO button on the Remote Contro! to select the video input for
your VCR.
Verify the VCR is on.
Insert a tape into the VCR and push Play button to watch the video in the Spiit
Screen.
Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down button.
Note: The SWAP button switches the Split Screen and Main Picture source. Press
the RECALL button for Split Screen status, onscreen.

REMOTE CONTROL
H,
CHANNEL, SWAP
*To prolong the life of the batteries,
turn the light off and on by pressing
R-TUNE and RECALL buttons,
simultaneously.
Remote Control
VCR, DVD{LD/CD)**, AUX, RCVR,
TY, , DTV, CBL, per RCVR
EXIT VCRREC GUIDE
>
SEARCH SPLIT
REV STOP PLAY FF
FREEZE SPLIT CHANNEL SWAP
CA A/DBS CH PAUSE
OPEN ‘CLOSE SLOW
O ©
6)
©
©
Q
oO
Panasonic
EUR511165
wTo Control CD, LD or OVD
player, press DVD button first.

Quick REFERENCE FUNCTIONAL KEY CHART
Quick Reference Functional Key Chart
ja
All Components” Turns On and Off selected components
pod Remote Control liuminate buttons
©
MUTE TV
O CABLE Mutes TV audio
ASPERT DTV Select picture size (ratio) to match
O TV programming format
TV/VIDEO TV
O RCVR Selects the input mode
Component mode selection for remote
control
Ail Components
TV CBL VCR CH Channel Up/Down
Ô
DBS
RCVR
9
Navigation
Up/Down
H
DBS DTV
Next/Previous Chapter
Next/Previous Track
TV CBL VCR LD CD Volume (+/-)
RCVR AUX
VOL} > VOL
DBS DVD DTV
Navigation Left/Right
Roller Guide Menu
Menu
Enter
DBS Menu
Select
Previous Channe!
DVD DVD Menu
MENU AUX (Cassette Deck) | Deck A/B
DTV Menu On/Off

QUICK REFERENCE FUNCTIONAL KEY CHART
Key " Operates
RECALL
D
PROG j
DTV
TV VCR CABLE DBS
Uj
All Components
900
0F| 0000
ODO
CD
VCR
DVD
CD
AUX (Cassette Deck)
PLAY
VCR
SPLIT AUX (Cassette Deck)
DVD LD
CD
VCR
AUX (Cassette Deck)
LD
AUX (Cassette Deck)
TV VCR CBL DBS
DVD LD
Function
Onscreen Dispiay
Time Format
Set-Top Box Program
Selects Channel
Selects Code
Selects Track
Keys 1,2,3 and 4 select A/V inputs; 5 Cd; 6
Tuner; 7 Phono; 8 Cassette Deck; 9 Aux
Exit Menus s
DBS Guide
Title
Repeat AB
Next Disc
SPLIT On/Off
Fast Forward
Skip Search Fast Forward
Search Fast Forward
Surround (+)
Rewind
Skip Search Fast Rewind
Search fast Rewind
Surround {-)
SPLIT Search
Stop

QUICK REFERENCE FUNCTIONAL KEY CHART
Key] Operates
VCR REC
O Record
SPLIT Freeze
FREEZE
TV/VCR TV/VCR Switch
OPEN/CLOSE
Open/Close
SPLIT Swap
Pause
LD
AUX (Cassette Deck)
DVD Still
SPLIT Channel
Channel Up/Down
SCR
OBS
cH
5
Channe!
Up/Down
(slow
+/-)
GD CAD
SLOW Page Up/Down
Repeat (+) - Random (-)
Center Channel (+/-)
Baitery Insiallation
Use two AA batteries:
Remove battery cover by cy in and up near arrow.
Install batteries matching (+) and (-) polarity signs.
Replace the battery cover.
Precautions
7 Replace batteries in pairs.
+ Do not mix battery types (zinc carbon with alkaline).
+ Do not recharge, heat, short-circuit, disassemble, or burn batteries.
incorrect installation can cause battery leakage and corrosion that will damage the Remote Control.

PROGRAMMING THE REMOTE!
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the
component function buttons for VCR, DVD, AUX, TV, CABLE, DBS or RCVR. Follow the procedures for programming
your Remote Contro! with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
WITH A CODE
Confirm that the external component is plugged in and on.
Tum the component off.
Press the ACTION and POWER button, together, for at least 5 seconds.
Press appropriate component button on the Remote Control. (VCR, DVD, AUX, TV, CABLE, DBS or RCVR)
Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).
Press the Remote Contro! POWER button to test the component. If the procedure was successful, the
component will turn on.
Helpful Hints: Unsuccessful Code
if the component does not operate with the
Remote Control, repeat the procedure using
another code. (Some brands have multiple
codes.)
If an incorrect code is entered, or if the procedure
takes longer than 30 seconds, the programming
will fail.
WITHOUT A CODE
This procedure searches all codes and is called the “sequence method”.
Confirm that the externa! component is piugged in and on.
Turn the component off.
Press the ACTION and POWER button, together, for at least 5 seconds.
Press appropriate component button on the Remote Control.
Press the {> button to move forward to the next code. Press the | button to move backward.
Press the Remote Control POWER button to test the component. If the procedure was successful, the
component will turn on.
Note: Repeat the above steps until the component code is found. It may take many attempts before the
correct code is found. '
After the code is found, press the ACTION button to store the code.
Write the code numbers from tables in this Space. This will serve as a reference if you need
to program your Remote Control.
Barut CABLE BOX oo E VCR ano i

COMPONENT CODES
Component Codes
The Universal Remote Control is capable of operating many component brands after entering a code. Some
components may not operate remotely because the codes are not available due to limited memory. The Universal
Remote Contro! does not control ai! features in all models.
Codes for VCR
Brand
Admirat
Code
Akai 014, 015, 016, 142
5 yam
|
125, 135
005, 006, 141
001, 130, 250
BX 010, 011, 140
003, 080, 081, 135, 136, 243, 250
005, 007, 008, 009
081, 136
130, 170, 306
000, 125, 300
Jensen
:
Karoo
Marantz
> c Q, ©
Canon
Citizen
Craig
Curtis Mathes
9 @ oO Oo £ D
©
o 3
©
i
Hitachi
ant Replay
<
8
Memorex
MGA/Mitsubishi
=
010, 011, 240
006, 100, 140, 200
081, 136
100, 101, 125, 130
000, 005, 010, 011, 130, 240, 300
000, 011, 300
081, 125, 130, 136, 150
125, 130, 150
.C. Penney
Pentax
Philips
000, 001, 002, 125, 130, 150, 300,
31
100, 101, 125, 130
Radio Shack 005, 009, 130, 170, 210, 241
CA 000, 001, 002, 125, 130, 150, 170,
300, 31
005, 009, 130, 210, 241
002, 004, 220
051, 081, 136, 240, 520
005, 009
001, 002, 004, 009, 081,136, 230,
241, 330, 340
000, 005, 006, 007,008
Proscan
D ETa 3 = 5 © w
"7 0
" oO
må O
oO
O
Es
Realistic
nm
ignature 2000
140, 141, 142
Sylvania 125, 130, 150
Tashiro
Tatung
Teac
Technics
Teknika
Toshiba
10, 011, 240
10, 011, 240
00, 101, 125, 130
par
001, 310
mn oO
3
<
< ta) Q Oo = -D [on] tD (D m Oo =
a_i
—b
Mont. Wards
Yamaha
Zenith
006, 009, 200, 210, 290
005, 010, 011, 240

COMPONENT CODES
Codes for Cable Box
Brand Code
K |
531, 544
Cableview [005,544
Ciizen [005,522
re A
530, 537, 544
e E
GCBrand [005,544
General ee ie oe
Instrument/ Mes , 360, 520, 521, 522, 530, 531,
erroid '
130, 350, 720, 730, 731, 900
32, 533
Hamlin
___|#30,
350,
720,
730,
731,
900
Hitachi
C
Macom
Magnavox
595
Memorex
[S48
Oak orano
Panasonic
poan
Pioneer 001, 260
Brand
ulsar
Code
S |
Realistic
Regal
egency
Rembrandt
130, 350, 720, 730, 731, 900
005, 544, 702
Imark
Sprucer
targate
Teleview
001, 005
005, 544
001, 005
w QD D R’:
2. 2 =e a 2
2 i
700, 701
oshiba
nika
niversal
ideoway
lewstar
000, 286
Zenith/Drake
Satelite
Ñ
£
Codes for Laser Disc
Brand
Code
100, 101, 135, 380
140, 141, 142, 143
Codes for DVD
Brand
Code
Brand
Code