Panasonic PT-DZ770K Installation guide

PRELIMINARY
As of January 2012
Available from June 2012
PT-DZ770
1-Chip DLP™ Projectors
PT-DZ770K/DZ770LK
7,000 lm
WUXGA (1,920 ×1,200)
The PT-DZ770LK is sold without lenses. The specifications are the same as those of the PT-DZ770K.
Crisp Pictures with 7,000 lm and
WUXGA Resolution for
Effective Visual Communication
Vivid Picture Quality with
High Brightness
• Unique lamp drive systems have helped to
make the body compact, while providing a
high 7,000 lm of brightness.
• Full-HD-ready WUXGA resolution.
• Panasonic’s proprietary RGB Booster
achieves high image quality with excellent
color reproduction and brightness.
• Detail Clarity Processor brings depth and
clarity to details.
• System Daylight View 2 enhances color
perception with no need to turn off the lights.
• The DICOM Simulation mode reproduces
easy-to-view rendering of X-ray photos.*1
• Rec. 709 mode for HDTV projection.
• Full 10-bit signal processing.
• Advanced technologies for excellent image
quality: 3D color management system, HD IP
conversion, digital noise reduction, dynamic
sharpness control.
Easy Maintenance and
Superior Reliability
• A dust-resistant cabinet and reusable “Eco
Filter” that needs no replacement for up to
12,000 hours*2protect optical components
from dust.
• Panasonic’s unique Dual Lamp System
eliminates a sudden interruption if a lamp
should fail (in dual-lamp operation mode).
The Lamp Relay mode also operates the
lamps alternately to enable 24/7 projection.
• The replacement lamp unit*3can be used
with all of the Panasonic PT-DW730 Series,
PT-D6000 Series and PT-DZ570 Series
projectors.*4This reduces the number of lamp
types that need to be kept in stock when
multiple projectors are used.
• Original cooling system allows use in ambient
temperatures from 0 °C to 45 °C (from 32 °F
to 113 °F)*5with a compact body and quiet
operation.
System Integration Flexibility
• Flexible vertical 360 degree installation, lens-
centered design, horizontal/vertical-lens shift
and a wide range of optional lenses.
• The Multi-Screen Support System optimally
adjusts multiple screens: Edge blending,
color matching and multi-screen processor.
• Side-by-Side function.
• Abundant terminals, including an HDMI
digital input terminal, meet a wide variety of
customer needs.
• Multi Projector Monitoring & Control Software
allows multiple projectors to be managed
together over a wired LAN.
• Web browser control over a wired LAN.
• PJLink™compatibility.
• Compatible with Creston RoomView™and
AMX Device Discovery.
• 30 m long-range wireless remote control.
• Direct Power Off.
• Mechanical lens shutter.
• Environment-friendly, low standby power
consumption of 0.2 W at 120 V AC, 0.3 W at
220–240 V AC (STANDBY MODE: ECO).*6
• Carefully manufactured at the Panasonic
factory in Japan, under strict quality control.

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. The projection
distances and throw ratios given in this leaflet are for use only as guidelines. For more detailed information, please
consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in
Japan, the United States, and other countries and regions or registered trademarks. RoomView, Crestron RoomView,
and Crestron Connected are trademarks of Crestron Electronics, Inc. AMX is a trademarks of AMX, LLC registered in
the U.S. and other countries. All other trademarks are the property of their respective trademark owners. Projection
images simulated. © 2012 Panasonic Corporation. All rights reserved. PT-DZ770PRE1 Printed in Japan.
All information included here is valid as of January 2012.
For more information about Panasonic projectors, please visit:
Projector Global Web Site – panasonic.net/avc/projector
Facebook – www.facebook.com/panasonicprojector
YouTube – www.youtube.com/user/PanasonicProjector
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
120 V AC, 9.1 A, 50/60 Hz; 220 –240 V AC, 4.6 A, 50 /60 Hz
830 W (890 VA) at 120 V AC, 810 W (950 VA) at 240 V AC (0.2 W at 120 V AC, 0.3 W at 220–240 V AC with STANDBY MODE set to ECO,*6
8 W at 120 V AC, 9 W at 220–240 V AC with STANDBY MODE set to NORMAL. Both with fan stopped.)
17.0 mm ( 0.67 ˝ ) diagonal (16:10 aspect ratio)
DLP™ chip ×1, DLP™ projection system
2,304,000 (1,920 ×1,200) pixels
Powered zoom (1.7–2.4:1), powered focus F 1.7–1.9, f 25.6–35.7 mm
Optional powered zoom/focus and fixed-focus lens
300 W (max. 310 W) UHM lamp ×2
2,000 hours*7(LAMP POWER: NORMAL), 3,000 hours*7(LAMP POWER: ECO)
1.27–15.24 m ( 50 –600 in), 1.27–5.08 m (50–200 in) with the ET-DLE055, 16:10 aspect ratio
7, 0 0 0 l m ( d u al - la m p, LAMP POWER: NORMAL)
90 %
2,500:1 (full on/off, CONTRAST MODE: HIGH)
1,920 ×1,200 pixels ( Input signals that exceed this resolution will be converted to 1,920 ×1,200 pixels.)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
VGA (640 ×480)–WUXGA*9(1,920 ×1,200 ), compatible with non-interlaced signals only, dot clock: 25–162 MHz
fH: 15–91 kHz, fV: 50–85 Hz, dot clock: 150 MHz or lower, 162 MHz or lower when a signal is input via DVI terminal
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
+50 % (+45 % with the ET-DLE080) from center of screen (powered)
±10 % from center of screen (powered)
Vertical: ±40° (±30° with the ET-DLE055/DLE080)
Ceiling/floor, front/rear
DVI-D 24-pin ×1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI 19-pin ×1 (Deep Color, compatible with HDCP)
BNC ×5 (RGB/YPBPR/YCBCR×1)
D-Sub HD 15-pin (female) ×1 (RGB/YPBPR/YCBCR×1)
BNC ×1 (composite video)
Mini DIN 4-pin ×1 (S-Video)
D-sub 9-pin (female) ×1 for external control (RS-232C compliant)
D-sub 9-pin (male) ×1 for link control
M3 ×1 for wired remote control
M3 ×1 for link control (for wired remote control)
D-sub 9-pin (female) ×1 for external control (parallel)
RJ-45 ×1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
39 dB (dual-lamp, LAMP POWER: NORMAL), 35 dB (dual-lamp, LAMP POWER: ECO)
Molded plastic
498 ×175*11 ×466 mm (19-19/32 ×6-7/8*11 ×18-11/32 in) (with supplied lens)
498 ×175*11 ×432 mm (19-19/32 ×6-7/8*11 ×17 in) (without lens)
Approximately 16.3 kg (35.9 lbs) (with supplied lens)
Approximately 15.4 kg (34.0 lbs) (without lens)
Operating temperature: 0 °C–45 °C (32 °F–113 °F)*5, operating humidity: 20%–80% (no condensation)
Power cord with secure lock, wireless/wired remote control unit, batteries (R6/LR6/AA type ×2), Software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring and Control Software)
Model
Power supply
Power consumption
DLP™ chip
Lens
Lamp
Lamp replacement cycle
Screen size (diagonal)
Brightness*8
Center-to-corner uniformity*8
Contrast*8
Resolution
Scanning frequency
Optical axis shift
Keystone correction range
Installation
Terminals
Operating noise*10
Cabinet materials
Dimensions
(W×H ×D)
Weight*10
Operating environment
Supplied accessories
Panel size
Display method
Pixels
PT-DZ770K
PT-DZ770LK
DVI-D
RGB
YPBPR(YCBCR)
Video/S-Video
Vertical
Horizontal
DVI-D IN
HDMI IN
RGB 1 IN
RGB 2 IN
VIDEO IN
S-VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
PT-DZ770K
PT-DZ770LK
PT-DZ770K
PT-DZ770LK
PT-DZ770K/DZ770LK
Specifications (Tentative)
Optional accessories
Silver models
Zoom lens
ET-DLE080
ET-DLE150
ET-DLE250
ET-DLE350
ET-DLE450
Fixed-focus lens
ET-DLE055
Ceiling mount bracket
ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
Replacement lamp unit
ET-LAD60A
ET-LAD60AW (Twin Pack)
Replacement filter unit
ET-EMF300
PT-DZ770S/DZ770LS
Silver models also available upon request.
The specifications are the same as those of the
PT-DZ770K and PT-DZ770LK.
PRELIMINARY
As of January 2012
*1This product is not a medical instrument. Do not use it for actual medical diagnosis.
*2The usage environment affects the duration of the filter.
*3ET-LAD60A/LAD60AW.
*4PT-DW730/DX800/DZ6710/DZ6700/DW6300S/D6000S/D5000S/DZ570/DW530/DX500.
*5The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the HIGH ALTITUDE MODE is set to ON (for
altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds
40 °C (104 °F) (35 °C (95 °F) in HIGH ALTITUDE MODE) when the projector is being used with LAMP SELECT set to DUAL
and LAMP POWER set to HIGH, the light output may be reduced approximately 20% to protect the projector.
*6When the STANDBY MODE is set to ECO, network functions such as standby on via LAN are not available. Also, only
certain commands can be received for external control using the serial terminal.
*7The usage environment affects the lamp replacement cycle.
*8Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*9WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-
Reduced Blanking).
*10 Average value. May differ depending on models.
*11 With legs at shortest position.