Panasonic PT-LX300E User manual

Operating Instructions
Functional Manual
DLP™Projector Commercial Use
Thank you for purchasing this Panasonic Product.
Before operating this product, please read the instructions carefully, and save this manual
J
for future use.
Before using your projector, be sure to read “Read this rst!” (See pages 2 to 6).
J
Model No. PT-LX300E
PT-LX270E
ENGLISH
TQBJ0609

2 - ENGLISH
Important
Information
Read this rst!
WARNING: THIS APPARATUS MUST BE EARTHED.
WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain
or moisture.
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.
2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to
qualied service personnel.
3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing
type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are
unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the
earthing plug.
CAUTION: To assure continued compliance, follow the attached installation instructions. The user must
use the provided RGB computer interface cable with ferrite cores. Any unauthorized changes or
modications to this equipment will void the user’s authority to operate.
This is a device to project images onto a screen, etc., and is not indented for use as indoor lighting in a
domestic environment.
Directive 2009/125/EC
Product information (for Turkey only)
EEE Yönetmeliğine Uygundur.
EEE Complies with Directive of Turkey.

Read this rst!
ENGLISH - 3
Important
Information
WARNING:
POWER

The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily
accessible when problems occur. If the following problems occur, cut off the power supply
immediately.
Continued use of the projector in these conditions will result in re or electric shock.
If foreign objects or water get inside the projector, cut off the power supply.
z
If the projector is dropped or the cabinet is broken, cut off the power supply.
z
If you notice smoke, strange smells or noise coming from the projector, cut off the power supply.
z
Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the power cord or the power plug.
If the power cord is used while damaged, electric shocks, short-circuits or re will result.
Do not damage the power cord, make any modications to it, place it near any hot objects, bend it
z
excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
Completely insert the power plug into the wall outlet and the power connector into the projector
terminal.
If the plug is not inserted correctly, electric shocks or overheating will result.
Do not use plugs which are damaged or wall outlets which are coming loose from the wall.
z
Do not use anything other than the provided power cord.
Failure to observe this will result in re or electric shocks. Please note that if you do not use the provided
power cord to ground the device on the side of the outlet, this may result in electric shocks.
Clean the power plug regularly to prevent it from becoming covered in dust.
Failure to observe this will cause a re.
If dust builds up on the power plug, the resulting humidity can damage the insulation.
z
If not using the projector for an extended period of time, pull the power plug out from the wall outlet.
z
Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.
Do not handle the power plug with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and re will result.
ON USE/INSTALLATION

Do not place liquid containers on top of the projector.
If water spills onto the projector or gets inside it, re or electric shocks will result.
If any water gets inside the projector, contact an Authorized Service Center.
Do not place the projector on soft materials such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, re or damage to the projector.
Do not set up the projector in humid or dusty places or in places where the projector may come into
contact with oily smoke or steam, ex. a bathroom.
Using the projector under such conditions will result in re, electric shocks or components deterioration.
Components deterioration (such as ceiling mount brackets) may cause the projector which is mounted on the
ceiling to fall down.
Do not install this projector in a place which is not strong enough to take the full weight of the
projector or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage
could result.
Do not place another projector or other heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or
injury. The projector will be damaged or deformed.

Read this rst!
4 - ENGLISH
Important
Information
WARNING:
Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician.
If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks.
Do not use anything other than an authorized ceiling mount bracket.
z
Be sure to use the wire provided with the projector mount bracket for ceiling mount as an extra safety
z
measure to prevent the projector from falling down. (Install in a different location to the ceiling mount
bracket.)
Do not cover the air inlet port or the air outlet port.
Doing so will cause the projector to overheat, which can cause re or damage to the projector.
Do not place the projector in narrow, badly ventilated places.
z
Do not place the projector on cloth or papers, as these materials could be drawn into the air inlet port.
z
Do not place your hands or other objects close to the air outlet port.
Doing so will cause burns or damage your hands or other objects.
Heated air comes out of the air outlet port. Do not place your hands or face, or objects which cannot
z
withstand heat close to this port.
Do not look and place your skin into the lights emitted from the projection window while the projector
is being used.
Doing so can cause burns or loss of sight.
Strong light is emitted from the projector’s projection window. Do not look or place your hands directly into
z
this light.
Be especially careful not to let young children look into the projection window. In addition, turn off the power
z
and disconnect the power plug when you are away from the projector.
Do not insert any foreign objects into the projector.
Doing so will cause re or electric shocks.
Do not insert any metal objects or ammable objects into the projector or drop them onto the projector.
z
Never attempt to remodel or disassemble the projector.
High voltages can cause re or electric shocks.
For any inspection, adjustment and repair work, please contact an Authorized Service Center.
z
Do not allow metal objects, ammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in re, electric shock, or malfunction of the
projector.
Do not place containers of liquid or metal objects near the projector.
z
If liquid enters inside of the projector, consult your dealer.
z
Particular attention must be paid to children.
z
Use the ceiling mount bracket specied by Panasonic.
Defects in the ceiling mount bracket will result in falling accidents.
Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
z
WARNING:
ACCESSORIES

Do not use or handle the battery improperly, and refer to the following.
Failure to observe this will cause burns, battery to leak, overheat, explode or catch re.
Do not use unspecied battery.
z
Do not disassemble coin cell battery.
z
Do not heat the battery or place them into water or re.
z
Do not allow the + and
z
-
terminals of the battery to come into contact with metallic objects such as
necklaces or hairpins.
Do not bring or store battery together with metallic objects.
z
Store the battery in a plastic bag and keep them away from metallic objects.
z
Make sure the polarities (+ and
z
-
) are correct when inserting the battery.
Remove the empty battery from the remote control at once.
z
Insulate the battery using tape or something similar before disposal.
z
Do not allow children to reach the battery (CR2025).

Read this rst!
ENGLISH - 5
Important
Information
The battery can cause personal injury if swallowed.
z
If swallowed, seek medical advice immediately.
z
If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.
Battery uid on your skin or clothing could result in skin inammation or injury.
z
Rinse with clean water and seek medical advice immediately.
Battery uid coming in contact with your eyes could result in loss of sight.
z
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Do not remove unspecied screws during the lamp unit replacement.
Doing so can cause electric shocks, burns, or injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will
result.
The lamp can easily explode if struck against hard objects or dropped.
z
Before replacing the lamp, be sure to disconnect the power plug from the wall outlet.
z
Electric shocks or explosions can result if this is not done.
When replacing the lamp, turn the power off and allow the lamp it to cool for at least 1 hour before handling
z
it otherwise it can cause burns.
Do not allow infants or pets to touch the remote control unit.
Keep the remote control unit out of the reach of infants and pets after using it.
z
Do not use the supplied power cord with devices other than this projector.
Using the supplied power cord with devices other than this projector may cause short circuits or
z
overheating, and result in electric shock or re.
Remove the depleted battery from the remote control promptly.
Leaving them in the unit may result in uid leakage, overheating, or explosion of the battery.
z
CAUTION:
POWER

When disconnecting the power cord, be sure to hold the power plug and power connector.
If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric
shocks will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall
outlet.
Failure to do so may result in re or electric shock.
Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.
Electric shocks can result if this is not done.
ON USE/INSTALLATION

Do not put your weight on this projector.
You could fall or the projector could break, and injury will result.
Be especially careful not to let young children stand or sit on the projector.
z
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in re.
Take particular care in locations exposed to direct sunlight or near stoves.
z
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause re or electric shocks
to occur.
Never plug headphones and earphones into VARIABLE AUDIO OUT jack.
Excessive sound pressure from earphones and headphones can cause hearing loss.
ACCESSORIES

Do not use the old lamp unit.
If used it could cause lamp explosion.

Read this rst!
6 - ENGLISH
Important
Information
If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the
broken pieces.
Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and which
contains nearly the same amount of mercury as uorescent lamps, and the broken pieces will cause injury.
If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek
z
medical advice immediately.
Ask your dealer about replacing the lamp unit and check the inside of the projector.
z
When not using the projector for an extended period of time, remove the battery from the remote
control.
Failure to observe this will cause the battery to leak, overheat, catch re or explode, which may result in
z
re or contamination of surrounding area.
Do not open the desiccant bag or eat it, and do not discard it to moisture circumstances.
Accidentally swallow the contents of the desiccant bag may cause bad result to your body. Moreover, the
contents may generate heat if exposing to moisture, so it may cause inammation or injury to your skin if such
contents is attached to your body or clothes.
In case that the desiccant has got into your eyes or mouth, wash with clean water immediately and seek
z
medical advice.
Particular attention must be paid to children.
z
To remove the battery
Remote Control Battery
1. Press the guide and pull out
the battery base.
2. Remove the battery.
3
V
O
L
T
S
CR2025
3
V
O
L
T
S
CR2025
Trademarks
Windows
•®, Windows Vista®, and Internet Explorer® are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
Macintosh, Mac OS and Safari are the trademarks of Apple Inc. registered in the United States and other
•
countries.
HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of
•
HDMI Licensing LLC in the United States and other countries.
Other names, company names or product names used in these operating instructions are the trademarks or
•
registered trademarks of their respective holders.
Please note that the operating instructions do not include the ® and ™ symbols.
Illustrations in these operating instructions
Note that illustrations of the projector and screens may differ from the ones you actually see.
•
Page references
In these instructions, references to pages are indicated as: (
•Æpage 00).
Term
In these instructions, the “Wireless remote control unit” accessory is referred to as the “Remote control”.
•

ENGLISH - 7
- Up to 3 000 lm* of brightness in a
compact body, weighting 2.3 k].
- High contrast ratio up to 4 000:1
makes images with excellent detail
and depth.
- Quiet 29 dB design does not
interrupt meetings or classes. (Lamp
power mode: ECO)
(* 3 000 lm is for PT-LX300E.
2 700 lm is for PT-LX270E.)
- The Intelligent Lamp Control System
reduces power consumption and
extends the lamp replacement
cycle. (Lamp power mode: AUTO)
Superb Basic Performance
Eco Friendly Performance
For details, see the corresponding pages.
1. Set up your projector.
(Æpage 19)
2. Connect with other devices.
(Æpage 22)
3. Connect the power cord.
(Æpage 24)
4. Power on.
(Æpage 26)
5. Select the input signal.
(Æpage 27)
6. Adjust the image.
(Æpage 27)
Features of the ProjectorFeatures of the Projector
Quick stepsQuick steps

8 - ENGLISH
Important
Information Preparation Getting Started Basic Operation Settings Maintenance Appendix
Contents Be sure to read “Read this rst!”. ( pages 2 to 6)
Important Information
Read this rst! ........................................... 2
Contents..................................................... 8
Precautions for Use................................. 10
Cautions when transporting.......................................... 10
Cautions when installing............................................... 10
Security .........................................................................11
Disposal.........................................................................11
Cautions on use ........................................................... 12
Accessories .................................................................. 13
Optional accessories .................................................... 13
Preparation
About Your Projector .............................. 14
Remote control ............................................................. 14
Projector body .............................................................. 15
Control Panel and Indicators ........................................ 16
Connecting terminals.................................................... 17
Using Remote control ............................ 18
Installing and Removing battery ................................... 18
Setting Remote control ID numbers ............................. 18
Getting Started
Setting up................................................. 19
Projection method ........................................................ 19
Parts for ceiling mount (Optional)................................. 19
Screen size and throw distance ................................... 20
Adjusting the Projector's Height ................................... 21
Adjusting the zoom and focus ...................................... 21
Connections............................................. 22
Before connecting to the projector ............................... 22
Connecting example: Computers ................................. 23
Connecting example: AV equipment ............................ 23
Basic Operation
Powering ON/OFF.................................... 24
Connecting the power cord .......................................... 24
ON(G)/STANDBY(R) indicator...................................... 25
Powering On the Projector ........................................... 26
Powering Off the Projector ........................................... 26
Projecting................................................. 27
Selecting the input signal ............................................. 27
How to adjust the state of the image ............................ 27
Basic operation by using remote
control................................................... 28
Switching the input signal............................................. 28
<LAMP> button ............................................................ 28
<INFO.> button............................................................. 28
<FREEZE> button ........................................................ 28
<KEYSTONE> button................................................... 28
<IMAGE> button........................................................... 28
<INPUT> button ........................................................... 29
<MENU> button............................................................ 29
<AUTO ADJ.> button.................................................... 29
<MUTE> button ............................................................ 29
<ASPECT> button........................................................ 29
<AV MUTE> button ...................................................... 29
<VOLUME> buttons ..................................................... 29
Settings
On-screen Display Menus....................... 30
How to operate menu ................................................... 30
Menu Tree .................................................................... 31
Picture ...................................................... 33
Color Mode................................................................... 33
Wall color...................................................................... 33
Brightness .................................................................... 33
Contrast........................................................................ 33
Sharpness .................................................................... 34
Saturation ..................................................................... 34
Hue............................................................................... 34
Gamma......................................................................... 34
Color Temp ................................................................... 34
Color Space.................................................................. 34
Position .................................................... 35
Aspect Ratio ................................................................. 35
Phase ........................................................................... 35
Clock ............................................................................ 35
H Position ..................................................................... 35
V Position ..................................................................... 36
Digital Zoom ................................................................. 36
V Keystone ................................................................... 36
Ceiling Mount ............................................................... 36
Setting ...................................................... 37
Language ..................................................................... 37
Menu Location.............................................................. 37
Closed Caption............................................................. 37
VGA Out (Standby)....................................................... 37
Test Pattern .................................................................. 37
Remote ID .................................................................... 38
Startup Logo................................................................. 38
Reset ............................................................................ 38

ENGLISH - 9
Important
Information
PreparationGetting StartedBasic OperationSettingsMaintenanceAppendix
Audio ........................................................ 39
Mute ............................................................................. 39
Volume ......................................................................... 39
In Standby Mode (Audio).............................................. 39
Options..................................................... 40
Auto Source.................................................................. 40
Input ............................................................................. 40
Auto Power Off (Min).................................................... 40
Lamp Settings .............................................................. 40
High Altitude ................................................................. 41
Information ................................................................... 41
Maintenance
About indicator status ............................ 42
If an indicator turns on.................................................. 42
Maintenance/replacement....................... 43
Before cleaning/replacing the unit ................................ 43
Maintenance................................................................. 43
Replacing the unit......................................................... 44
Troubleshooting ...................................... 46
Appendices
Appendix .................................................. 49
Serial terminal .............................................................. 49
Other terminals............................................................. 52
List of compatible signals ............................................. 53
Specications .......................................... 55
Dimensions................................................................... 57
Ceiling mount bracket safeguards......... 58
Index ......................................................... 59
Contents

10 - ENGLISH
Important
Information
Precautions for Use
Cautions when transporting
When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts.
z
Doing so may damage the internal parts and result in malfunctions.
Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
z
Cautions when installing
Do not set up the projector outdoors.
J
The projector is designed for indoor use only.
Do not use under the following conditions.
J
Places where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal
z
parts and result in malfunctions.
Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may uctuate in rare
z
cases due to the hot air from the air exhaust port or the heated or cooled air. Make sure that the exhaust
from the projector or other equipment, or the air from the air conditioner does not blow toward the front of
the projector.
Near lights (studio lamps, etc.) and other locations of great temperature uctuation (“Operating
z
environment” (Æ page 56)): Doing so may shorten the life of the lamp or result in deformation of the outer
case and malfunctions.
Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
z
Place where there is high-power laser equipment: Directing a laser beam onto the lens surface causes
z
damage to the DLP chips.
Be sure to ask a specialized technician when installing the product to a
J
ceiling.
This requires an optional ceiling mount bracket.
Model No.: ET-PKV100H (for high ceilings), ET-PKV100S (for low ceilings),
ET- PKL300B (Projector Mount Bracket)
Lens focus
J
The high clarity projection lens is thermally affected by the light from the light source, making the focus
unstable in the period just after switching on the power. Wait at least 30 minutes with the image projected
before adjusting the lens focus.
When using the projector at elevations below approx. 1 000 m (3 300 ft),
J
make sure [High altitude] is set to [Off].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
When using the projector at elevations approx. 1 000 m (3 300 ft) and
J
approx. 3 000 m (10 000 ft), make sure [High altitude] is set to [On].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
Do not install the projector at elevations approx. 3 000 m (10 000 ft) or
J
higher above sea level.
Failure to do so may shorten the life of the internal parts and result in malfunctions.
Conrm and set the using environment temperature [“Operating
J
environment” (Æpage 56)].

Precautions for Use
ENGLISH - 11
Important
Information
Do not tilt the projector or place it on its side.
J
Do not tilt the projector body more than approximately ±20 ° vertically or ±20 ° horizontally. Over-tilting may
result in shortening the life of the components.
Within 20 ° Within 20 °
Within 20 ° Within 20 °
Cautions when setting the projectors
J
Do not stack the projectors.
z
Do not block the ventilation ports (intake and exhaust) of the projector.
z
Avoid heating and cooling air from the air conditioning system directly blow to the ventilation ports (intake
z
and exhaust) of the projector.
Over 50 cm (1.5') Over 1 m (3.0') Over 50 cm (1.5')
Over 50 cm (1.5')
Do not place the projector in an enclosed space.
z
If you need to place the projector in an enclosed space, additional air conditioning and ventilation system
must be equipped. When ventilation is insufcient, remaining heat may trigger the protection circuit of the
projector.
Security
Take safety measures against following incidents.
Personal information being leaked via this product.
z
Unauthorized operation of this product by a malicious third party.
z
Interfering or stopping of this product by a malicious third party.
z
Security instruction
Make your password as difcult to guess as possible.
z
Change your password periodically.
z
Panasonic or its afliate company never inquires a password directly to a customer. Do not tell your
z
password in case you receive such an inquiry.
Disposal
When disposing of the product, ask your local authority or dealer about the correct methods of disposal.
The lamp contains mercury. When disposing of the used lamp unit, ask your nearest local authorities or
dealer about proper disposal of the unit.
Dispose of used battery according to the instructions or your local disposal rule or guidelines.

Precautions for Use
12 - ENGLISH
Important
Information
Cautions on use
In order to get the picture quality
J
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light
z
from indoor lamps from shining onto the screen.
Depending on where the projector is used, heated air from an exhaust port or warm or cold air from an air
z
conditioner can cause a shimmering effect on screen.
Avoid use in locations where exhaust or streams of air from projector, other devices and air conditioners
ow between the projector and the screen.
The lens of projector is affected by the heat from the luminous source. Because of this, the focusing may
z
not be stable right after the power is turned on. Focusing is stabled after projecting image for 30 minutes
and longer.
Do not touch the surface of the projection lens with your bare hand.
J
If the surface of the projection lens becomes dirty from ngerprints or anything else, this will be magnied and
projected onto the screen.
DLP chips
J
The DLP chips are precision-made. Note that in rare cases, pixels of high precision could be missing or
z
always lit, but this is not a malfunction.
Directing a high power laser beam onto the projection window surface can damage the DLP chips.
z
Optical components
J
Operating the projector in an environment with high temperature or heavy exposure to dust or tobacco smoke
will reduce the service life of the optical components and may necessitate their replacement within less than
one year of use. For details, consult your dealer.
Lamp
J
The luminous source of the projector is a mercury lamp with high internal pressure.
A high pressure mercury lamp has following characteristics.
The brightness of the lamp will decrease by duration of usage.
z
The lamp may burst with sound or shorten life by shock or chipping.
z
The life of the lamp varies greatly depending on individual specicities and usage conditions. In particular,
z
continuous use over 22 hours and frequent on/off switching of the power greatly deteriorate the lamp and
affect the lamp life.
In rare cases, the lamp burst shortly after the projection.
z
The risk of bursting increases when the lamp is used beyond its replacement cycle. Make sure to replace
z
the lamp unit consistently. (Æ page 44)
If the lamp bursts, gas contained inside of the lamp is released in a form of smoke.
z
It is recommended to store replacement lamps for contingency.
z
It is recommended to have authorized engineer or your dealer replace the lamp unit.
z
About connections to computer or peripheral device
J
To assure continued compliance, follow the attached installation instructions, which include using the provided
power cord and shielded interface cables when connecting to computer or peripheral device.
Importer's name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Center
Winsbergring 15, 22525 Hamburg, Germany

Precautions for Use
ENGLISH - 13
Important
Information
Accessories
Make sure the following accessories are provided with your projector. Numbers in the brackets ( ) show the
number of accessories.
Wireless remote control
unit (x1)
(H458UB01G001)
VGA cable (x1)
(H4200200G105)
Lithium coin cell Battery
CR2025 (x1)
CD-ROM (x1)
(H368UB01G001)
CR2025
3V
(Included to the remote
control unit at the time
of purchase)
AC Power Cord (x1)
(H4200120G011) Lens Cap (x1)
(Attached to the projector
at the time of purchase.)
Attention
After unpacking the projector, discard the power cord cap and packaging material properly.
For lost accessories, consult your dealer.
z
The part numbers of accessories and separately sold components are subject to change without notice.
z
Store small parts in an appropriate manner, and keep them away from young children.
z
Optional accessories
Options Model No.
Replacement lamp unit ET-LAL320
Ceiling Mount Bracket ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
Projector Mount Bracket ET-PKL300B
Serial terminal conversion adapter ET-ADRS

14 - ENGLISH
Preparation
About Your Projector
Remote control
(17)
(16)
(15)
(14)
(13)
(12)
(11)
(18)
(19)
(1)
(2)
(4)
(5)
(6)
(8)
(7)
(3)
(9)
(10)
(1) Remote control signal emitter
(2) <COMPUTER> button
Switches to COMPUTER input.
(3) <v/b> button
Turns the projector on/off.
(4) <LAMP> button
Displays [Lamp Power Mode] menu.
(Æ page 28)
(5) <FREEZE> button
Temporarily stops the image and mute the
sound. Press again to return to previous state.
(6) <MENU> button
Turns the main menu on/off.
(7) <INPUT> button
Displays [Source] menu. (Æ page 27)
(8) <MUTE> button
Temporarily mutes the sound.
Press again to return to previous state.
(9) <KEYSTONE -> button
Adjusts the image to compensate for distortion
caused by tilting the projector.
(10) <AV MUTE> button
Momentarily turns off/on the audio and video.
Press again to return to previous state.
(11) <HDMI> button
Switches to HDMI source.
(12) <INFO.> button
Displays [Information] menu.
(13) <VIDEO> button
Switches to Video source.
(14) <KEYSTONE +> button
Adjusts the image to compensate for distortion
caused by tilting the projector.
(15) <IMAGE> button
Selects the color mode among Dynamic, PC,
Movie, Game and User.
(16) ▲▼◄► buttons
Uses to operate menu.
(17) <AUTO ADJ.> button
Automatically synchronize the projector to the
input source.
(18) <ASPECT> button
Selects [Aspect Ratio] in [Screen].
(19) <VOLUME +/-> buttons
Increases/decreases speaker volume.
Attention
Do not drop the remote control.
z
Avoid contact with liquids.
z
Do not attempt to modify or disassemble the remote
z
control.
Note
The <AUTO ADJ.> operation may not optimize the image
z
position or the resolution, depending on the input signal
format or the image contents. In this case, switch to a
different image and execute <AUTO ADJ.> again.
When pointing the remote control directly toward the
z
projector (Remote control signal receiver), operating
range for the remote control is within 8 m (26.25 ft). Also,
operation range available for four directions (up, down,
left, right to the projector) is ± 35° and the operation
distance may become short.
If there are any obstacles between the remote control
z
and the remote control signal receiver, the remote control
may not operate correctly.
When the remote control signal receiver is lit with a
z
uorescent light or other strong light source, the projector
may become inoperative. Set the projector as far from
the luminous source as possible.
You can operate all of the functions of the projector via
z
the remote control. Make sure not to lose the remote
control.
Before using the remote control for the rst time, remove
z
the transparent insulation tape.
0
Q
2


/
L
&
(
/
/

9
2
/
7
6
-
$
3
$
1
+
&5
Transparent insulation
tape

About Your Projector
ENGLISH - 15
Preparation
Projector body
3
3
2
1
121212124
121212125
1212121210
1212121211
1212121212
1212121213
121212127
121212126
121212129
121212129
121212128
(1) Control panel and indicators (Æpage 16)
(2) Zoom lever
(3) Air intake port
(4) Speaker
(5) Focus ring
Adjusts the focus.
(6) Lens cap
(7) Projection lens
(8) Remote control signal receiver
(9) Air exhaust port
WARNING:

Keep your hands and other objects away from
the air exhaust port.
Keep your hand and face away.
z
Do not insert your nger.
z
Keep heat-sensitive articles away.
z
Heated air from the air exhaust port can cause burns
or external damage.
(10) Security slot
Attaches the commercial shackle lock,
manufactured by Kensington, to protect your
projector. Compatible with the Kensington MicroSaver
Security System.
(11) Adjustable feet
Adjusts the projection angle.
(12) <AC IN> terminal
(13) Connecting terminals (Æpage 17)

About Your Projector
16 - ENGLISH
Preparation
Control Panel and Indicators
1
9
8
2
36
5
7
4
(1) <ON(G) / STANDBY(R)> indicator
Indicates the projector’s status.
(2) <v/b> button
Turns the projector on/off.
(3) <INPUT> button
Displays [Source] menu. (Æ page 27)
(4) Unavailable button
(5) <MENU> button
Turns the main menu on/off.
(6) ▲▼◄► buttons
Uses to operate menu.
(7) Unavailable button
(8) <TEMP> indicator
Indicates the status of the internal temperature or
the cooling fan of the projector.
(9) <LAMP> indicator
Indicates the projector’s lamp status.

About Your Projector
ENGLISH - 17
Preparation
Connecting terminals
23 5
46
1
7
(1) <HDMI IN> Input
Connects to HDMI input signals.
(2) <COMPUTER IN>
Connects to COMPUTER IN input signal.
(3) <VIDEO IN>
Connects to VIDEO IN input signal.
(4) <SERIAL IN>
Connects to a computer via an RS-232C cable.
(5) <MONITOR OUT>
Outputs COMPUTER signals input to the projector.
(6) <AUDIO IN>
Connects to AUDIO IN signal.
(7) <VARIABLE AUDIO OUT>
Outputs the audio signals input to the projector.
Note
When the <HDMI IN> terminal is connected to a computer
z
via a HDMI-DVI conversion cable, it can only input video
signal and the analog audio signal can not be input.

Using Remote control
18 - ENGLISH
Preparation
Installing and Removing battery
Press the guide and pull1 )
out the battery base.
3
V
O
L
T
S
CR2025
M
3
V
O
L
T
S
CR2025
Install new battery into2 )
the compartment.
3
V
O
L
T
S
CR2025
M
3
V
O
L
T
S
CR2025
Remove the old
Lithium coin cell
battery and install
new one (CR2025).
Ensure that the side
with a “+” is facing
up.
Put the battery base3 )
back.
3
V
O
L
T
S
CR2025
M
3
V
O
L
T
S
CR2025
Attention
When discarding a lithium coin battery, be sure both sides (+/-) are covered with adhesive insulating tape, such as and the
z
cellophane tape, and discard it according to the instructions of the local government.
Setting Remote control ID numbers
When you use the system with multiple projectors, you can operate all the projectors simultaneously or each
projector individually using single remote control, if unique ID number is assigned to each projector.
After setting the remote control ID of the projector, set the same remote control ID to the remote control.
There are 7 different remote control IDs: [All], [ID1]~[ID6], the initial remote control ID is [All].
Setting the remote control ID
J
1) While holding down the <MENU> key, press the <IMAGE> key. The number of times you press the
<IMAGE> key corresponds to the desired remote control ID.
The number of times to press the <IMAGE> key is as follows:
ID1 = Once, ID2 = Twice, ID3 = 3 times, ID4 = 4 times, ID5 = 5 times, ID6 = 6 times.
2) The remote control ID is changed when the <MENU> button is released.
JResetting the remote control ID
The remote control ID is reset to [All] (default) by pressing the <MENU> key and <IMAGE> key at the
same time for 10 seconds or more.
Note
When operating the projector under [All] code, you can operate several projectors at the same time.
z
If the <IMAGE> button is pressed 7 times or more, the remote control ID cannot be changed (the operation is invalid).
z
For setting the remote control ID codes, see [Remote ID] in the [Setting] menu. (
zÆ page 38)
If the battery is not in use for a long period of time and is removed from the remote control, the remote control ID will be
z
reset.
Using Remote control

Setting up
ENGLISH - 19
Getting Started
Setting up
Projection method
You can use the projector with any of the following 4 projection methods to set the desired method in the
projector.
Setting on a desk/oor and
J
projecting forward
Mounting on the ceiling and
J
projecting forward
Menu setting*1Menu setting*1
Ceiling Mount Front Ceiling Mount Front Ceiling
Mounting on the ceiling and
J
projecting from rear
(Using translucent screen)
Setting on a desk/oor and
J
projecting from rear
(Using translucent screen)
Menu setting*1Menu setting*1
Ceiling Mount Rear Ceiling Ceiling Mount Rear
For details about the menu setting, please refer to the [Position] menu → [Ceiling Mount]. (*1 :Æpage 36)
Parts for ceiling mount (Optional)
You can install the projector on the ceiling by using the optional ceiling mount bracket (ET-PKV100H: for high
ceiling, ET-PKV100S: for low ceiling), and the optional projector mount bracket ET-PKL300B.
Use only the ceiling mount brackets specied for this projector.
z
Refer to the installation manual for the ceiling mount bracket when you install the bracket or hanger and the
z
projector.
Attention
To ensure projector performance and security, installation of the ceiling mount bracket must be carried by your dealer or a
z
qualied technician.

Setting up
20 - ENGLISH
Getting Started
Screen size and throw distance
Place the projector referring to the diagram on the right and the gures of throwing distance. You can adjust the
display size.
Attention
Before installing, please read “Precautions for Use”. (
zÆ pages 10 to 13)
Do not use the projector and the high-powered laser equipment in the same room. Hitting of a laser beam on to the lens
z
can damage the DLP chips.
Projection distance
J
All measurements below are approximate and may differ slightly from the actual measurements. (Unit: m)
Projection size For 4:3 aspect ratio For 16:9 aspect ratio
Screen diagonal
(SD)
Minimum
distance
(LW)
Maximum
distance
(LT)
Height
position (H)
Minimum
distance
(LW)
Maximum
distance
(LT)
Height
position (H)
0.76 (30") 1.2 1.3 0.07 1.3 1.4 0.14
1.02 (40") 1.6 1.8 0.09 1.7 1.9 0.18
1.27 (50") 2.0 2.2 0.11 2.2 2.4 0.23
1.52 (60") 2.4 2.6 0.14 2.6 2.9 0.27
1.78 (70") 2.8 3.1 0.16 3.0 3.3 0.32
2.03 (80") 3.2 3.5 0.18 3.5 3.8 0.37
2.29 (90") 3.6 3.9 0.21 3.9 4.3 0.41
2.54 (100") 4.0 4.4 0.23 4.3 4.8 0.46
3.05 (120") 4.8 5.2 0.27 5.2 5.7 0.55
3.81 (150") 5.9 6.6 0.34 6.5 7.1 0.69
5.08 (200") 7.9 8.7 0.46 8.6 9.5 0.91
6.35 (250") 9.9 10.9 0.57 10.8 11.9 1.14
7.62 (300") 11.9 13.1 0.69 13.0 14.3 1.37
Projected image
SH
SD
SW
Screen
L (LW/LT)
H
SH
L (LW/LT)
Screen
SW
L (LW/LT) *1Projection distance (m)
SH Height of the projection area (m)
SW Width of the projection area (m)
HDistance from the center of lens to
the image lower end (m)
SD Diagonal length of the projection
area (m)
*1: LW: Minimum distance, LT: Maximum distance