
Model PT-VW431D PT-VW435N PT-VW440 PT-VX505N PT-VX510
Power supply 100-240 V AC, 50/60 Hz
Power consumption
365 W [0.3 W when standby
mode set to Eco*1, 12.5 W
when standby mode set to
Network.(19.7 W with DIGITAL
LINK, 27.5 W when standby
mode of sound set to ON.)]
365 W (0.3 W when standby
mode set to Eco*1,
12.9 W when standby mode
set to Network.)
365 W (0.3 W when standby
mode set to Eco*1,
11.5 W when standby mode
set to Network.)
365 W (0.3 W when standby
mode set to Eco*1,
12.9 W when standby mode
set to Network.)
365 W (0.3 W when standby
mode set to Eco*1,
11.5 W when standby mode
set to Network.)
LCD panel
Panel size 15 mm (0.59 in)
diagonal (16:10 aspect ratio)
16 mm (0.63 in)
diagonal (4:3 aspect ratio)
Display method Transparent LCD panel (x 3, R/G/B)
Pixels 1,024,000 (1,280 x 800) x 3,
total of 3,072,000 pixels
786,432 (1,024 x 768) x 3,
total of 2,359,296 pixels
Lens 1.6x manual zoom (throw ratio: 1.18–1.90:1), manual focus, F 1.60–2.12, f 15.28–24.62 mm
Lamp 280 W x 1, lamp replacement cycle (lamp power: Normal/Eco): 2,500 hours/4,000 hours*2
Screen size (diagonal) 0.76–7.62 m (30–300 in),
16:10 aspect ratio
0.76–7.62 m (30–300 in),
4:3 aspect ratio
Brightness*34,300 lm (lamp power: Normal)
4,800 lm (lamp power: Normal) 5,000 lm (lamp power: Normal) 5,500 lm (lamp power: Normal)
Center-to-corner uniformity*385 %
Contrast*33,500:1 (full on/full off, lamp power: Normal, Iris: On) 4,000:1 (full on/full off, lamp power: Normal, Iris: On)
Resolution 1,280 x 800 pixels*41,024 x 768 pixels*5
Scanning
frequency
HDMI/
DIGITAL LINK
(PT-VW431D only)
fH
: 25–80 kHz,
fV:
24–85 Hz,
dot clock: 162 MHz or lower
fH: 25–80 kHz, fV: 50–85 Hz, dot clock: 162 MHz or lower
RGB (analog) fH: 15–100 kHz, fV: 50–100 Hz, dot clock: 140 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)
YPBPR(YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i(525i)] fH: 15.63 kHz, fV: 50 Hz [576i(625i)]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)]
fH: 45.00 kHz, fV: 60 Hz [720(750)/60p] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1125(1035)/60i] fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]
fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical: +48 % Vertical: +40 %
Keystone correction range Vertical: ±30° (±20° when Real-Time Keystone)
Installation Ceiling/floor, front/rear
Terminals
HDMI IN
HDMI 19-pin x 1 (Deep Color,
compatible with HDCP)
480p, 576p, 720/60p,
720/50p, 1080/60i, 1080/50i,
1080/24p, 1080/60p,
1080/50p, VGA (640 x 480)-
WUXGA (1,920 x 1,200),*
6
audio signal : linear PCM
(sampling frequencies:
48 kHz, 44.1 kHz, 32 kHz)
HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200),*6
audio signal : linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
COMPUTER IN 1 D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCRx 1)
COMPUTER IN 2/
MONITOR OUT
D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output selectable using on-screen menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
VIDEO IN Pin jack x 1 (Composite VIDEO)
S-VIDEO IN Mini DIN 4-pin x 1 (S-VIDEO)
AUDIO IN Pin jack x 2 (L-R x 1) for VIDEO/S-VIDEO input
COMPUTER AUDIO IN 1 M3 x 1 (L-R x 1)
COMPUTER AUDIO IN 2
(MIC IN) M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO OUT M3 x 1 (L-R x 1) for output (variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
LAN — RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
LAN/DIGITAL LINK
RJ-45 x 1
for network/DIGITAL LINK
connection (Video, audio
and control signals),
10Base-T/100Base-TX,
compliant with PJLink™
(class 1), Deep Color,
compatible with HDCP
—
USB A — USB type-A (for the USB
Memory Viewer) x 1 —USB type-A (for the USB
Memory Viewer) x 1 —
USB B — USB type-B (for the USB
Display/Wireless Mouse) x 1 —USB type-B (for the USB
Display/Wireless Mouse) x 1 —
Built-in speaker 4 cm round shape x 1, output power: 10.0 W (monaural)
Noise level 37 dB (lamp power: Normal), 29 dB (lamp power: Eco) 38 dB (lamp power: Normal),
31 dB (lamp power: Eco)
37 dB (lamp power: Normal),
29 dB (lamp power: Eco)
38 dB (lamp power: Normal),
31 dB (lamp power: Eco)
Cabinet materials Molded plastic
Dimensions (W × H × D) 379 x 107 x 305 mm (14.9 x 4.2 x 12.0 in) (with legs at shortest position, not including protruding parts)
Weight Approximately 4.8 kg (10.6 lbs)
Operating environment
Operating temperature: 0-40°C [32-104°F]
*
7
(less than 1,200 m [3,937 ft] above sea level, Fan control: OFF),
0-30°C [32-86°F] (between 1,200 m and 2,000 m [3,937 ft and 6,562 ft] above sea level, Fan control: ON1),
0-30°C [32-86°F] (between 2,000 m and 2,700 m [6,562 ft and 8,858 ft] above sea level, Fan control: ON2)
Operating humidity: 20-80 % (no condensation)
Supplied accessories
Power cord x 1*8, power cord holder x 1, wireless remote control unit, batteries (AAA/R03/LR03 type x 2),
carrying bag x 1, computer cable (1.8 m, for VGA) x 1
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software, Wireless
Manager ME 6.0)
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software, Wireless
Manager ME 6.0)
Software CD-ROM
(Logo Transfer Software,
Multi Projector Monitoring &
Control Software)
Specifications
*1When the Standby mode is set to Eco, network functions such as standby on via LAN are not available.
Also, only certain commands can be received for external control using the serial terminal.
*2The values given for the recommended lamp replacement cycles are maximum.
*3Measurement, measuring conditions, and method of notation all comply with ISO 21118 international
standards.
*4Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
*5Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*6Compliant with VESA CVT-RB.
*7When the ambient temperature is between 35°C and 40°C (95°F and 104°F), the lamp power should be
set to Eco.
*8Power cords available (x 2) for the PT-VW431DEA/ VW435NEA/ VW440EA/ VX505NEA/ VX510EA. * Not supported by IEEE802.11n.
Specifications (built-in wireless LAN function)
6
Model PT-VW435N PT-VX505N
Standard IEEE802.11b/g/n
Infrastructure mode
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES),
128 bit/64 bit WEP, WPA-EAP/WPA2-EAP (PEAP [MS-CHAPv2/GTC],
EAP-FAST [MS-CHAPv2/GTC], EAP-TTLS [MD5/MS-CHAPv2])
Ad-hoc mode* 128 bit/64 bit WEP