Panasonic SVSR100 - SD AUDIO RECORDER User manual

PP EG EB GC
SD Audio Recorder
Operating Instructions
Model No. SV-SR100
Dear customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this
manual for future reference.
Note:
“EB” on the packaging indicates the United Kingdom.
[For\U.S.A.]
The warranty can be found on pages 22 and 23.
RQT6457-P
SD AUDIO RECORDER
MENU
ENTER/MEMORY
12
ABC
3
SV-SR100
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
010
>_
_
9
WXYZ
DEF
:9
SD OPEN
1
SD
1
CD
1
/
;
OPROFF
FUNCTION
DEL
∫
S-XBS
MODE
2
CDOPEN
REC
PAUSE
VOLUME
DISPLAY
CHARA
SPACE
!"#
This manual was printed with soy based ink.

2
RQT6457
WARNING:
TO REDUCE THE RISK OF FIRE, ELEC-
TRIC SHOCK OR PRODUCT DAMAGE, DO
NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING
AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE
PLACED ON THE APPARATUS.
This product may receive radio interference caused
by mobile telephones during use. If such interference
is apparent, please increase separation between the
product and the mobile telephone.
CAUTION:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable pro-
tection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment
and receiver.
≥Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
≥Consult the dealer or an experienced radio/TV
technician for help.
Any unauthorized changes or modifications to this
equipment would void the user’s authority to operate
this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause un-
desired operation.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
CAUTION!
≥DO NOT INSTALL, OR PLACE THIS UNIT,
IN A BOOKCASE, BUILT-IN CABINET OR
IN ANOTHER CONFINED SPACE. EN-
SURE THE UNIT IS WELL VENTILATED.
TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CUR-
TAINS AND ANY OTHER MATERIALS DO
NOT OBSTRUCT THE VENTILATION
VENTS.
≥DO NOT OBSTRUCT THE UNIT’S VENTI-
LATION OPENINGS WITH NEWSPA-
PERS, TABLECLOTHS, CURTAINS, AND
SIMILAR ITEMS.
≥DO NOT PLACE SOURCES OF NAKED
FLAMES, SUCH AS LIGHTED CANDLES,
ON THE UNIT.
≥DISPOSE OF BATTERIES IN AN ENVI-
RONMENTALLY FRIENDLY MANNER.
THIS UNIT IS INTENDED FOR USE IN TROPICAL
CLIMATES.
Marking sign is located on bottom of the unit.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.:
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
For other areas
For Europe, the U.S.A, and Canada
For areas except Europe, the U.S.A. and
Canada
Make sure the voltage of the AC adaptor suits your
local voltage before plugging it into the household
AC outlet . If it doesn't, use a flat-headed screwdriver
to set the VOLTAGE ADJUSTOR to the voltage
corresponding to your area.
If the power supply in your area is 115 V or 120 V,
please set the VOLTAGE ADJUSTOR as follows:
For 115 V: set to 110 V
For 120 V: set to 127 V
VOLTAGE
ADJUSTOR
110V
VOLTAGE
ADJUSTOR
110V
110V 127V
OFF 220V-240V

3
RQT6457
Getting started
Table of contents
Getting started
Supplied accessories . . . . . . . . . . . . . 03
IMPORTANT SAFETY
INSTRUCTIONS . . . . . . . . . . . . . . . . 04
Listening caution . . . . . . . . . . . . . . . . 05
Selection and care of batteries . . . . . 05
Control guide. . . . . . . . . . . . . . . . . . . . 06
Power supply. . . . . . . . . . . . . . . . . . . . 07
Recording and playing on this unit . . . 08
CD and SD card information . . . . . . . 08
Inserting CDs and SD cards. . . . . . . . 09
HOLD . . . . . . . . . . . . . . . . . . . . . . . . . . 09
Playback
Playing CDs and SD cards . . . . . . . . . 10
Other ways of playing CDs and SD
cards . . . . . . . . . . . . . . . . . . . . . . . . . 11
Recording
Recording from a CD to an SD
card . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Recording from a microphone and
other equipment . . . . . . . . . . . . . . . 14
Other ways of recording. . . . . . . . . . . 15
Editing
Titling SD cards. . . . . . . . . . . . . . . . . . 16
Erasing tracks . . . . . . . . . . . . . . . . . . . 17
Formatting SD cards. . . . . . . . . . . . . . 17
Reference
Anti-Skip System. . . . . . . . . . . . . . . . . 17
Convenient functions . . . . . . . . . . . . . 18
Changing the display . . . . . . . . . . . . . 18
Using the unit with other
equipment . . . . . . . . . . . . . . . . . . . . 19
Specifications . . . . . . . . . . . . . . . . . . . 19
Displays . . . . . . . . . . . . . . . . . . . . . . . . 20
Troubleshooting guide . . . . . . . . . . . . 21
Maintenance . . . . . . . . . . . . . . . . . . . . 21
Limited Warranty (U.S.A.). . . . . . . . . . 22
Product Service. . . . . . . . . . . . . . . . . . 23
Supplied accessories
Please check and identify the supplied accessories.
For the U.S.A.
To order accessories contact 1-800-332-5368 or web
site (http://www.panasonic.com).
For other areas
To order accessories, call the dealer from whom you
have made your purchase.
∏1 Remote control: N2QCBD000022
∏1 Pair of stereo earphones:
L0BAB0000170
∏1 Carrying case: RFC0073-H
∏1 Cleaning cloth: RFE0088-1
∏1 AC adaptor
U.S.A. and Canada: RFA2002A
United Kingdom: RFA2002C
Continental Europe: RFA2002B
Other areas: RFA2002D
Use numbers indicated when asking for replacement
parts.
The configuration of the
AC adaptor depends on
the area.

4
RQT6457
Getting started
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety
precautions listed below. Keep these operating instructions handy for future reference.
Safety
1. Power source—Connect the
unit to a power source of the type
described in these instructions or
as marked on the unit.
2. Polarization—The unit is
equipped with a polarized power
plug where one blade is wider
than the other. This safety fea-
ture ensures that the plug fits into
your household AC outlet only
one way. If the plug doesn’t fit
one way, try reversing it. If the
plug still doesn’t fit, contact an
electrician to replace the obso-
lete outlet. Do not attempt to
defeat the safety purpose of the
plug.
3. Power cord protection—Route
the AC power supply cord so that
it will not be walked on or pinched
by items placed on or against it.
Never take hold of the plug or
cord with wet hands. Always
grasp the plug body firmly when
connecting and disconnecting it.
4. Overloading—When connect-
ing the AC power supply cord, be
careful not to overload the
household AC outlet, extension
cord, or outlet from any other
device as this can result in fire or
electric shock.
5. Nonuse periods—Turn the unit
off when it is not in use. Unplug
the unit from the household AC
outlet if it is not to be used for a
long time. Unplug the unit during
lightning storms. Leaving the unit
connected to a household AC
outlet for extended periods can
cause battery fluid leakage.
6. Attachments and accesso-
ries—Use only the attachments
and accessories recommended
in these operating instructions.
Installation
∫Placement
1. Foreign material—Ensure ob-
jects and liquids do not get into
the unit. Avoid exposing the unit
to excessive smoke, dust,
mechanical vibration, and shock.
2. Magnetism—Situate the unit
away from equipment and devic-
es that generate strong magnetic
fields.
3. Stacking—Do not place any-
thing on top of this unit.
4. Wall and ceiling mounting—
Do not mount the unit on walls or
ceilings unless specified in the
instructions.
∫Environment
1. Water and moisture—Do not
use the unit near water, such as
near a bathtub or swimming pool.
Avoid damp basements.
2. Heat—Situate the unit away
from heat sources, such as radia-
tors. Do not leave it in an auto-
mobile exposed to direct sunlight
with the doors and windows
closed as this may deform the
cabinet.
Do not situate where tempera-
tures fall below 5oC (41oF) or rise
above 35oC (95oF).
Maintenance
(See page 21 for details.)
Unplug the unit from the household
AC outlet before cleaning.
Clean with a damp cloth.
Do not use abrasive pads, scouring
powders, or solvents.
Service
1. Damage requiring service—
The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or
AC adaptor has been dam-
aged; or
(b) Objects or liquids have got-
ten into the unit; or
(c) The unit has been exposed
to rain; or
(d) The unit does not operate
normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or
the cabinet damaged.
2. Servicing—Do not attempt to
service the unit beyond that
described in these operating
instructions. Refer all other ser-
vicing to authorized servicing
personnel.
3. Replacement parts—When
parts need replacing ensure the
servicer uses parts specified by
the manufacturer or parts that
have the same characteristics as
the original parts. Unauthorized
substitutes may result in fire,
electric shock, or other hazards.
4. Safety check—After repairs or
service, ask the servicer to per-
form safety checks to confirm
that the unit is in proper working
condition.
(Item 2 in “Safety”applies only in the
U.S.A. and Canada.)

5
RQT6457
Getting started
Listening caution
Do not play your headphones or earphones at a high
volume. Hearing experts advise against continuous
extended play.
If you experience a ringing in your ears, reduce volume
or discontinue use.
Do not use while operating a motorized vehicle. It may
create a traffic hazard and is illegal in many areas.
You should use extreme caution or temporarily discontin-
ue use in potentially hazardous situations.
Even if your headphones or earphones are the open-air
type designed to let you hear outside sounds, don’t turn
up the volume so high that you can’t hear what’s around
you.
Sound can be deceiving. Over time your hearing “com-
fort level”adapts to higher volumes of sound. So what
sounds “normal”can actually be loud and harmful to your
hearing.
Guard against this by setting your equipment at a safe
level BEFORE your hearing adapts.
To establish a safe level:
≥Start your volume control at a low setting.
≥Slowly increase the sound until you can hear it comfort-
ably and clearly, and without distortion.
Once you have established a comfortable sound level:
≥Leave it there.
Selection and care of
batteries
∫Selection
As a safety precaution, this unit is constructed so it is
impossible to recharge ordinary batteries.
Only batteries especially designed for this unit can be
recharged.
Special rechargeable Ni-Cd batteries (set of 2)
≥U.S.A. and Canada: P-3GAVA/2B
≥United Kingdom and Europe: P-3GAVE/2B
≥Other areas: P-3GAVT/2B
For details, check with your dealer.
EST. 1924
≥You can recharge the batteries about 300 times. They
have reached the end of their useful life if play time dra-
matically reduces after recharging.
≥Play time may be shorter than usual after recharging
batteries for the first time or after they have been
unused for a long time. Repeatedly recharge and
discharge the batteries if this occurs to restore them to
normal.
∫Care
To prevent battery damage, electrolyte leakage, and
short-circuiting, heed the following points.
≥Do not peel off the covering on batteries and do not use
if the covering has been peeled off.
≥Align the poles +and -correctly when inserting the
batteries.
≥Do not mix different types of batteries or old and new
batteries.
≥Remove the batteries if you do not intend to use the unit
for a long time.
≥Do not throw into fire, short-circuit, disassemble, or
subject to excessive heat.
≥Do not attempt to recharge dry cell batteries.
≥Do not allow metal objects to touch the battery termi-
nals as this may cause short-circuiting which is dan-
gerous.
≥When carrying batteries in a pocket or bag, ensure no
metal objects such as necklaces are placed together
with them. Contact with metal may cause short-
circuiting which can cause a fire.
Special rechargeable
batteries
Notice about the rechargeable battery
The battery is designated recyclable.
Please follow your local recycling regulations.
Suomi
Huomautus ladattavasta paristosta
Paristo määritellään kierrätykseen sopivaksi.
Ole hyväja noudata asuinpaikkasi kierrätyssääntöjä.
Norsk
Merknad vedrørende det oppladbare batteriet
Batteriet er resirkulerbart.
Vennligst følg det lokale regelverket for resirkulering.
Ordinary dry cell
batteries/rechargeable
batteries
Discontinue use if you experience discomfort with
the earphones or any other parts that directly contact
your skin. Continued use may cause rashes or other
allergic reactions.
For United Kingdom and Continental Europe

6
RQT6457
Getting started
Control guide
DC IN 4.5V LINE IN
SDAUDIO RECORDER
MENU
ENTER/MEMORY
12
ABC
3
SV-SR100
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
010
>_
_
9
WXYZ
DEF
:9
SDOPEN
1
SD
1
CD
1
/
;
OPROFF
FUNCTION
DEL
∫
S-XBS
MODE
2
CDOPEN
REC
PAUSE
VOLUME
DISPLAY
CHARA
23
4
5
6
78
9
:
1
SD AUDIO RECORDER SV-SR100
MENU
ENTER/
MEMORY
1
2
ABC
3
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
0
10
>
_
_
9
WXYZ
DEF
:9
REC
PAUSE
VOLUME
DISPLAY
CHARA
SDOPEN
1
SD
1
CD
1
/
;
ROFF
CTION
DEL
∫
-XBS
MODE
HOLD
MIC
Ë
;< = >
?
@
A
B
CD
E
F
REC
CD
M1
-
SD HQSP
RANDOM SYNC
LP S-XBS CD SD
HQSP
SYNC
LP
S-XBS
M1
-
RANDOM
OPQRS
T
U
V
W
VOL
CD/SD HOLD
GH I
M L K
N
J
SPACE
!" #
SPACE
!"#
1Display panel
21/;, CD: to play or pause a CD
31, SD: to play an SD card
4∫, OPR OFF, FUNCTION: to turn the unit off, stop
play, and switch between CD and SD mode
5S-XBS: to emphasize the bass
6MODE, DEL: to change the play mode and delete
characters
72CD OPEN: to open the CD lid
8SD OPEN 1:to open the SD card lid
9SD memory card lid
:CD lid
;REC PAUSE: to put the unit into recording standby
mode
<VOLUME buttons
=:, 9:to skip or search and to select menu
items
>ENTER/MEMORY: to enter menu items and
program CD tracks
?Character/numbered buttons
@MENU: to enter and exit menus
ADISPLAY, CHARA: to change the display and type
of character
BË:earphone/remote control jack
CMIC: microphone jack
DHOLD: to prevent accidental operation on the main
unit
EDC IN 4.5 V K:terminal for AC adaptor
FLINE IN: to connect other equipment for recording
G:, 9:to skip or search
H∫/1:to start and stop play and to turn the unit off
IVOLUME buttons
JEarphone jack
KClip
LHOLD: to prevent accidental operation on the
remote control
MCD/SD: to switch between CD and SD mode
NPlug
∫Display panel
OCurrent mode
PRecording mode
QPlay mode
RS-XBS indicator
SBattery indicator
TSynchronized recording indicator
UGeneral display: shows source, track numbers,
recording level and other text information
VCD program play indicator
WRecording indicator
Recording time meter
Back of the unit

7
RQT6457
Getting started
Power supply
Using the AC adaptor
Use only the included AC adaptor. Use of other adaptors
can damage the unit.
Note:
≥The configuration of the AC adaptor differs according to
the area.
≥The unit is in the standby condition when the AC adap-
tor is connected. The primary circuit is always “live”as
long as the AC adaptor is connected to an electrical
outlet.
For areas except Europe, the U.S.A. and Canada
The AC voltage is different according to the area. Be
sure to set the proper voltage in your area before use.
(For details, please refer to page 2.)
When the unit is not to be used for a long time
The unit continues to use power (for U.S.A. and Canada:
1.9 W, for United Kigdom: 2.0 W, for Continental
Europe: 2.1 W, for others: 1.5 W) when the AC adaptor
is connected, even if the unit is off. Disconnect the AC
adaptor to save electricity.
Using rechargeable batteries
(not included)
Obtain the optional rechargeable Ni-Cd batteries
(➡page 5).
∫Recharging
1. Insert the special rechargeable batteries.
(➡Using dry cell batteries)
2. Connect the AC adaptor.
(➡Using the AC adaptor)
Recharging starts.
“CHARGE”flashes.
“CHARGE”goes out when
charging is complete (3 to
4 hours).
The optional rechargeable batteries take 3 to 4 hours to
fully charge. Full charging can take up to 5 hours,
depending on the ambient temperature and condition of
the batteries.
Disconnect the AC adaptor (leaving it connected can
discharge the batteries).
Note:
≥You can recharge the batteries before they are fully dis-
charged.
≥Recharging may only be performed when the unit is off.
≥It is normal for the AC adaptor and batteries to become
warm during recharging.
The battery indicator
This indicator flashes when
the batteries are almost fully
discharged.
Replace with fresh dry cell
batteries or recharge.
Note:
≥The time between when the indicator starts flashing
and when the power is cut off depends on the type of
batteries you are using.
≥This indicator may not function correctly if you use bat-
teries other than the specified rechargeable batteries
(➡page 5).
DC IN 4.5V LINE IN
+
+-
-
Using dry cell batteries
(not included)
Disconnect the AC adaptor.
Note:
Use Panasonic alkaline batteries. (Operation time will be
extremely short if you use manganese batteries.)
∫If the battery lid comes loose
Insert the protrusions on the lid into the holes in the unit.
Do not connect or disconnect the AC adaptor
while recording. This can cause recording to
stop and data to be corrupted.
≥Settings return to the default values if you
disconnect the power sources (AC adaptor and
batteries).
≥If the unit malfunctions or freezes during use,
disconnect the power sources (the AC adaptor
or batteries).
Re-connect the power source and continue
operation.
DC IN 4.5 V K
AC adaptor Household AC outlet
(mains socket)
Two LR6, AA,
AM-3 batteries

8
RQT6457
Getting started
Recording and playing
on this unit
Recording
This unit uses the “SD Audio Format”, an audio standard
set down by the SD Association, which uses superior
copyright protection technology.
∫Secure Digital Music Initiative (SDMI)
This is copyright-protection technology that encodes
audio data to protect the rights of the producers of music,
promote a healthy music industry, and protect the rights
of the original purchaser of the music.
The use of this technology entails the following limita-
tions.
≥This unit encodes music data for recording. You cannot
copy this data to other equipment.
≥Encoded data cannot be backed-up or restored.
≥It may be impossible to use data if it has copyright pro-
tection or if it was recorded on DVD Audio equipment.
∫Serial Copy Management System
(SCMS)
Recordings from CDs to SD memory cards are restricted
by this system. Such recordings are of high quality, but it
is not possible to record from CDs that are restricted by
this system.
∫Approximate recording times in
minutes
Playback
≥This unit’s CD section cannot play AAC, MP3, or WMA
audio data.
≥This unit’s SD card section can only play audio data
(AAC, MP3, and WMA) recorded using the SD Audio
Format.
≥Windows Media, and the Windows logo are trade-
marks, or registered trademarks of Microsoft Corpora-
tion in the United States and/or other countries.
≥WMA (Windows Media Audio) is a compression format
developed by Microsoft Corporation. It achieves the
same sound quality as MP3 with a file size that is
smaller than that of MP3.
Card
volume
64 MB
256 MB
512 MB
HQ
(high
quality)
64
265
535
SP
(standard
play)
86
353
713
LP
(long
play)
129
530
1070
Recording mode
CD and SD card
information
CDs
Choose CDs with this mark:
Do not;
≥use CDs with labels and stickers that are coming off or
with adhesive exuding from under labels and stickers.
≥
attach scratch-proof covers or any other kind of accessory.
≥write anything on the CD.
≥clean CDs with liquids. (Wipe with a soft, dry cloth.)
≥use CDs printed with label printers available on the
market.
≥use irregularly shaped
CDs.
CD-R and CD-RW discs
This unit can play CD-DA (digital audio) format audio
CD-R and CD-RW that have been finalized (a
process that enables CD-R and CD-RW players to
play audio CD-R and CD-RW) upon completion of
recording. It may not be able to play some CD-R/RW
due to the condition of the recording.
SD cards
It may not be possible to use cards formatted on other
equipment.
Protecting your recordings
≥Do not open the SD lid or connect or disconnect the
power sources while operating the unit, especially while
“CARD Writing”is on the unit’s display, as this can
damage your data.
≥Set the write-protect switch to LOCK. Release the
write-protect switch to make other recordings and to
use the editing features.
≥SD logo is a trademark.
≥
Portions of this product are protected under copyright law
and are provided under license by ARIS/SOLANA/4C.
Handling precautions
≥Store cards in their cases when not in use.
≥Do not take apart.
≥Do not touch the metal terminals with your hands or
metal objects.
≥Do not detach the label and do not attach other labels.
CD and SD card storage
Do not store:
≥In direct sunlight,
≥In humid or dusty locations,
≥In locations directly exposed to heating appliances,
≥On the dashboard or rear deck of a car.
Write-protect switch

9
RQT6457
Getting started
SDMUSICRECORDER
MENU
ENTER/MEMORY
12
ABC
3
SV-SR100
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
01
0
>_
9
WXYZ
DEF
:9
SD OPEN
1
SD
1
CD
1
/
;
OPROFF
FUNCTION
DEL
∫
S-XBS
MODE
REC
PAUSE
VOLUME
DISPLAY
CHARA
2
CDOPEN
2 CD OPEN
P
U
S
H
P
U
S
H
SPACE
!"#
SD OPEN 1
SDMUSICRECORDER
MENU
ENTER/MEMORY
12
ABC
3
SV-SR100
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
01
0
>_
9
WXYZ
DEF
:9
SD OPEN
1
SD
1
CD
1
/
;
OPROFF
FUNCTION
DEL
∫
S-XBS
MODE
2
CDOPEN
REC
PAUSE
VOLUME
DISPLAY
CHARA
SPACE
!"#
Inserting CDs and SD
cards
CDs
HOLD
HOLD causes the unit to ignore short, accidental button
presses. You can still open the disc and card lids.
It prevents:
≥The unit powering on accidentally and depleting the
batteries.
≥Interruption of play or recording due to a button being
accidentally pressed.
The unit and remote control each have independent
HOLD switches.
To use HOLD
Set [HOLD] to the “HOLD”position.
When HOLD on the main unit is on, “HOLD”appears on
the display for a few seconds after pressing a button.
Press on the center of
the card to unlock.
Insert label-up with the cut-
off corner facing in.
Removing CDs
Insert label-up.
Press until the CD
clicks into place.
Note:
Do not open during
play.
Insert only CDs.
After the CD has stopped
Press [PUSH].
Removing SD cards
REC
PAUSE
VOLUME
DISPLAY
CHARA
MENU
ENTER/MEMORY
1
2
ABC
3
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
0
10
>_
9
WXYZ
DEF
:
9
SDMUSIC RECORDERSV-SR100
HOLD
MIC
Ë
SDOPEN
1
HOLD HOLD
CD/SD HOLD
HOLD HOLD
Press on the center to lock
into place.
HOLD mode
HOLD mode
Release
Release
SD cards

10
RQT6457
Playback
SDAUDIORECORDERSV-SR100
MENU
ENTER/
MEMORY
1
2
ABC
3
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
0
10
>
_
_
9
WXYZ
DEF
:9
REC
PAUSE
VOLUME
DISPLAY
CHARA
SD OPEN
1
SD
1
CD
1
/
;
ROFF
CTION
DEL
∫
-XBS
MODE
HOLD
MIC
Ë
1HOLD
L
R
2
VOL
3
54
CD
1 / ;
SD
1
SD
OPR OFF
FUNCTION
∫
:9
SPACE
! "#
+
VOLUME
Playing CDs and SD cards
∫To pause CD play
Press [1/;, CD].
Press again to restart play.
∫Skipping tracks
During play
Press [:] (Backward) or [9] (Forward).
∫Searching through tracks
During play
Press and hold [:] (Backward) or [9] (Forward).
∫Resume
The unit stores the place where you stop play or turn the
unit off. Play starts from that position when you restart
SD play (from the beginning of the track if you turned the
unit off), or from the beginning of the track if you restart
CD play.
Depending on the position or track, this may not work
correctly.
Play starts from the first track if:
≥You open the CD or SD lid.
(Resume may work if you change the disc or card while
the unit is off.)
≥Disconnect the power source (AC adaptor or batteries)
while off.
∫Auto power off
To save the batteries, the unit turns off after about five
minutes after being stopped, unless menus are being
used.
Elapsed play time of the current track
1 Release the HOLD mode.
2 Connect the remote control and ste-
reo earphones. (Plug in firmly.)
3 Insert the CD or SD card (➡page 9).
4 Press [1, SD] or [1/;, CD].
The unit comes on and play starts.
Play stops after the last track.
5 Adjust the volume.
Choose a level between 0 and 25. Press and hold to
change successively.
The level returns to 10 when you disconnect the
power sources (AC adaptor and batteries).
∫To stop play
Press [∫, OPR OFF, FUNCTION] (main unit) or [∫/1]
(remote control).
The unit turns off about 5 minutes later.
CD SD
∫To turn the unit off
While stopped, press and hold [∫, OPR OFF,
FUNCTION] or [∫/1] until the display goes out.
Track title (SD only)
Total play time
CD SD
Position you stopped play
CD
SD
Plug type:
3.5 mm (1/8 in.) stereo

11
RQT6457
Playback
Other ways of playing CDs and SD cards
Play modes:
Repeat one track (1-`), all tracks (`),
play them randomly once (RANDOM) or
repeatedly (`RANDOM)
Press [MODE, DEL].
Each time you press the button:
1-`>`>RANDOM>`RANDOM
^-------=Cancel (no indicator)(---------}
The mode cancels when you open the disc or card lid.
Note:
≥When using the above modes (except “`”), you can
search only within the current track.
≥In the “`”mode, you can also skip and search be-
tween the first and last tracks. (You cannot skip or
search back from the first track to the last track when
playing a CD.)
≥You cannot skip or search back to tracks that have
been played in random or random repeat.
CD program play:
Play up to 24 tracks in the order you
choose
1 Press the numbered buttons while stopped to
select a track.
≥For tracks numbered 10 and over, press [S10] then
the two digits.
≥You can also select tracks with [:] or [9].
≥“ERROR”appears if you enter a number that
doesn’t exist.
2 Press [ENTER/MEMORY].
3 Repeat steps 1 and 2 to program other tracks.
4 Press [1/;, CD].
The program is cleared when play finishes.
∫“PROGRAM FULL”is displayed
If you have programmed 24 tracks.
∫To check the contents of the program
Press [ENTER/MEMORY] during play.
The track numbers and their sequence appear in order,
one after the other.
∫To clear the program
Press [∫, OPR OFF, FUNCTION] during play.
Note:
≥You cannot program tracks on an SD card.
≥Tracks are skipped in the programmed order when you
press [:] or [9].
SDAUDIO RECORDER
MENU
ENTER/MEMORY
12
ABC
3
SV-SR100
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
010
>
_
_
9
WXYZ
DEF
:9
SDOPEN
1
SD
1
CD
1
/
;
OPROFF
FUNCTION
DEL
∫
S-XBS
MODE
2
CDOPEN
REC
PAUSE
VOLUME
DISPLAY
CHARA
CD
1 / ;
SD
1
S-XBS
MODE
DEL
:ENTER/MEMORY 9
OPR OFF
FUNCTION
∫
SPACE
!"#
Preparation: Press [∫, OPR OFF, FUNCTION] to
select CD or SD.
Boosting the bass
Press [S-XBS].
Each time you press the button:
S-XBS()Cancel (no indicator)
Direct play:
Start play from a specific track
1. Press the character/numbered buttons to select
track.
≥For tracks numbered 10 and over, press [S10] then
the two digits.
≥For tracks numbered 100 and over, press [S10]
twice then the three digits.
≥You can also press [:] or [9] to select the
track.
≥“ERROR”appears if you enter a number that
doesn’t exist on the disc or card.
2. Press [1/;, CD] or [1, SD].
Play starts at the selected track and plays through to
the end of the disc or card.
Program sequence
M
Character/numbered
buttons

12
RQT6457
Recording
SD AUDIO RECORDER
MENU
ENTER/MEMORY
12
ABC
3
SV-SR100
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
010
>
_
_
9
WXYZ
DEF
:9
SDOPEN
1
SD
1
CD
1
/
;
OPROFF
FUNCTION
DEL
∫
S-XBS
MODE
2
CDOPEN
REC
PAUSE
VOLUME
DISPLAY
CHARA
1
2
CD
REC
CD SD SP
REC
34
REC
CD SD SP
OPR OFF
FUNCTION
∫
CD
1 / ;
REC
PAUSE
ENTER/MEMORY
MENU
: 9
SPACE
!" #
Recording from a CD to an SD card (Main unit only)
Recording level meter
Preparation:
≥Release HOLD mode (➡page 9).
≥Release the card’s write-protect switch (➡page 8).
1 Insert the SD card and CD (➡page 9).
2 Press [∫, OPR OFF, FUNCTION] to
switch to “CD”.
Each time you press the button: CD()SD
3 Press [REC PAUSE] to enter the
recording standby mode.
Recording time meter
This gives you a rough guide to how much memory is
left on the card.
Recording mode
See next page.
4 Confirm that “REC OK”appears, then
press [1/;, CD].
Recording and CD play start.
Recording starts from the first available space.
Play and recording stop when the CD ends.
∫To stop
Press [∫, OPR OFF, FUNCTION].
“CARD Writing”appears on the display while the unit
writes to the card.
The unit turns off about 5 minutes later.
∫To turn the unit off
Press and hold [∫, OPR OFF, FUNCTION] while
stopped until the display goes out.
Note:
Your attention is drawn to the fact that recording pre-
recorded tapes or discs or other published or broadcast
material may infringe copyright laws.
Elapsed time
Recording time meter
Recording mode
CD()SD
If a message other “REC OK”appears in step 3
Look up the message on page 20 and take the sug-
gested steps.

13
RQT6457
Recording
Recording modes
Total recording time and sound quality depend on the
recording mode you choose for recording.
Approximate recording times (using a 64-MB card)
Recording a track that is playing
Recording starts from the beginning of the track.
1 Press [REC PAUSE] while playing the track.
Play stops and the unit enters the recording standby
mode.
2 Confirm that “1-REC OK”appears, then press
[1/;, CD].
Play and recording stop at the end of the track.
Recording selected tracks
1 Program the tracks you want to record
(➡page 11).
2 Press [REC PAUSE] to enter the recording stand-
by mode.
3 Press [1/;, CD].
Recording and program play start.
Note:
≥This unit uses the AAC format to compress digital
signals recorded from a CD to an SD card.
≥Tracks recorded on this unit can be played on an SD
audio player.
≥Recording time may shorten after repeatedly recording
and erasing tracks. Reformat the card to correct this
(➡page 17).
≥Depending on the condition of the CD recording, track
marks may be added unnecessarily. You can erase
such tracks after recording.
∫To ensure recording is completed
correctly
Use the AC adaptor to power the unit. Recording
stops if the batteries are depleted.
∫During recording
≥Do not connect or disconnect the AC adaptor.
≥Do not shake the unit.
≥Do not open the card and disc lids.
Doing any of these can cause recording and play to
stop and the data to be corrupted. Be especially careful
while “CARD Writing”is on the display as recording
may not be completed correctly.
≥The anti-skip system (➡page 17) is off while
recording.
Recording mode
HQ (high quality): 128 kbps
SP (standard play, default
setting): 96 kbps
LP (long play): 64 kbps
Total time
(minutes)
64
86
129
For other cards, see page 8.
∫Changing the recording mode
1 While in the recording standby mode, press
[MENU].
You can also change the recording mode while
stopped.
2 Press [:] or [9] to select “REC MODE?”.
3 Press [ENTER/MEMORY].
“BITRATE?”appears on the display.
4 Press [ENTER/MEMORY].
5 Press [:] or [9] to select the recording
mode.
Each time you press the button:
[>SP: 96 kbps?
l:
l;
l>HQ: 128 kbps?
l:
l;
{>LP: 64 kbps?
6 Press [ENTER/MEMORY].
To stop partway
Press [MENU] before step 6.
Track marks
These marks are added between tracks when recording.
The area between two track marks is counted as one
track.
Track marks are added automatically:
When recording CDs
Track marks correspond to those on the CD.
When recording from other equipment
If there is 2-second silence.
When recording through a microphone
Every 5 minutes.
Note:
≥You can change the way track marks are added when
recording from other equipment or through a micro-
phone (➡page 15).
≥Track marks may not be added correctly in some
cases.

14
RQT6457
Recording
SD AUDIO RECORDER
MENU
ENTER/MEMORY
12
ABC
3
SV-SR100
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
010
>
_
_
9
WXYZ
DEF
:9
SDOPEN
1
SD
1
CD
1
/
;
OPROFF
FUNCTION
DEL
∫
S-XBS
MODE
2
CDOPEN
REC
PAUSE
VOLUME
DISPLAY
CHARA
4
32
REC
SD SP
REC
REC
SD SP
REC
DC IN 4.5V LINE IN
R
L
STEREO
MIC
Ë
[LINE IN] [MIC]
1ab
REC
PAUSE
OPR OFF
FUNCTION
∫
ENTER/MEMORY
MENU
: 9
SD
1
SPACE
!" #
SD
Preparation:
≥Release the HOLD mode (➡page 9).
≥Release the card’s write-protect switch (➡page 8).
≥Insert an SD card (➡page 9).
1 Connect the other equipment while
the unit is stopped.
Do not connect a microphone and other equipment
at the same time.
aConnecting other audio equipment
Purchase a stereo connection (phono) cable.
bConnecting a microphone
Purchase a stereo microphone.
2 Press [∫, OPR OFF, FUNCTION] to
switch to SD.
3 Press [REC PAUSE] to enter the re-
cording standby mode.
4 Press [1, SD] to start recording, then
start the source (or face the micro-
phone towards the source).
Recording from a microphone and other
equipment (Main unit only)
Recording time meter
Recording mode
Recording level meter
∫To pause recording
Press [REC PAUSE].
A track mark is added.
Press [1, SD] to restart recording.
∫To stop
Press [∫, OPR OFF, FUNCTION].
“CARD Writing”appears on the display while the unit
writes to the card.
The unit turns off about 5 minutes later.
∫To turn the unit off
Press and hold [∫, OPR OFF, FUNCTION] while
stopped until the display goes out.
Note:
≥Keep the microphone away from the unit so it doesn’t
record sound from the unit itself.
≥Ensure you do not connect the microphone to the head-
phone jack.
≥Adjust the volume on the other equipment if you make
the connection through the other unit’s headphone
jack.
Plug type:
3.5 mm
(1/8 in.) stereo
CD()SD
(not included) (not included)

15
RQT6457
Recording
There are various settings you can change to record in
other ways.
[A] SYNCHRO recording:
To start recording when this unit receives input from
other equipment. Recording pauses when input
stops.
[B] Recording sensitivity:
Lower the level if the level meter frequently reaches
the maximum level when recording from other
equipment.
Raise the level if the level meter barely moves.
[C] Track marking:
Choose how to add track marks when recording
through a microphone or other equipment.
Changing settings
1. Press [MENU] while in the recording standby
mode.
(You can also change these settings while stopped.
You cannot change them while recording.)
2. Press [:] or [9] to select “REC MODE?”.
3. Press [ENTER/MEMORY].
4. Press [:] or [9] to select the mode.
[A] Turning SYNCHRO on
(1) Select “LINE SYNCHRO?”.
(2) Press [ENTER/MEMORY].
(3) Press [:] or [9] to select “LINE
SYNCHRO ON?”.
[B] Setting recording sensitivity
(1) Select “LINE REC SENS?”.
(2) Press [ENTER/MEMORY].
(3) Press [:] or [9] to select the sensitivity.
Each time you press the button:
REC SENS H?: When recording from
:portable equipment
;
REC SENS L?: When recording from
stereo components
[C] Selecting a marking mode
(1) When recording from other equipment
Select “LINE MARK MODE?”.
When recording through a microphone
Select “MIC MARK MODE?”.
(2) Press [ENTER/MEMORY].
(3) Press [:] or [9] to select the mode.
Each time you press the button:
[>
AUTO: Track marks added when tracks change.
l: (when recording from other equipment)
l;
l>MANUAL: Add marks manually
l:(➡right)
l;
{>TIME: Marks are added at 3-, 5-, or
10-minute intervals
5. Press [ENTER/MEMORY].
To stop partway
Press [MENU] before step 5.
Note:
While SYNCHRO recording
≥[REC PAUSE] does not respond to touch.
≥The beginning of the track may not be recorded in
some cases. Select “OFF”if this occurs.
∫MANUAL track marking
Press [ENTER/MEMORY] at the place you want to mark.
≥You can still do this even if you didn’t select MANUAL.
≥You cannot add the next track mark until 2 seconds
have passed since adding the last one.
Other ways of recording

16
RQT6457
Editing
Titling SD cards 4 Press [ENTER/MEMORY].
Steps 5 and 6 are unnecessary when titling the card.
Proceed to “Entering characters”in step 6.
5 Press [:] or [9] to select the
track you want to title.
6 Press [ENTER/MEMORY].
You can now enter characters.
Entering characters
1 Press [DISPLAY, CHARA] to select the type.
Each time you press the button:
[>Capitals
l;
l>Lower case
l;
{=Numbers
2 Press the character/numbered buttons to
select.
The characters change each time you press a
button.
Step 3 is unnecessary when entering numbers.
3 Press [ENTER/MEMORY].
The character moves to the title section and the
unit is ready to accept the next character.
7 Press [ENTER/MEMORY].
Editing is complete when “CARD Writing”goes out.
When entering track titles or artist names, you
can continue to enter other titles or names as neces-
sary. Repeat the steps from step 5 and press
[MENU] when you are finished.
When entering the card title, editing ends auto-
matically.
To stop partway
Press [MENU] before step 7.
Note:
The maximum number of characters may be reduced if
the audio data was recorded on other equipment.
∫“TEXT FULL”is displayed
If the title has 60 characters.
You cannot enter more than 60 characters.
∫Deleting and correcting characters
1 Press [:] or [9] to move the cursor over the
character you want to correct or delete.
2 Press [MODE, DEL].
The character is deleted and characters after it move
to the left.
(When correcting a character)
3 Insert the character.
∫To insert another character
1 Press [:] or [9] to move the cursor to the
position you want to insert the character.
2 Enter the character.
Characters after it move to the right.
SD AUDIO RECORDER
MENU
ENTER/MEMORY
12
ABC
3
SV-SR100
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
010
>
_
_
9
WXYZ
DEF
:9
SDOPEN
1
OP
R
O
FUNCTIO
N
DEL
∫
S-XBS
MODE
2
CD OPEN
REC
PAUSE
VOLUME
DISPLAY
CHARA
MENU
MODE
DEL
:ENTER/MEMORY 9
DISPLAY
CHARA
SPACE
!" #
Button Number
1
2
3
4
5
6
7
8
9
0
Alphabet
CAPITALS
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
lower case
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
](space) ! " # $ % & ' ( ) ¢i, j. /
: ; < = > ? @ [ \ ] ^ _ ` { | } ~
You can enter up to 60 characters for card and track titles
and artist names.
Preparation:
≥Press [∫, OPR OFF, FUNCTION] to select SD.
≥Release the write-protect switch (➡page 8).
1 Press [MENU].
“EDIT?”is displayed.
2 Press [ENTER/MEMORY].
3 Press [:] or [9] to select the
item you want to enter.
“TRACK TITLE?”
“TRACK ARTIST INFO?”
“CARD TITLE?”
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
0
10
S
SPACE
! " #
Character/
numbered buttons

17
RQT6457
Editing
Reference
MENU
ENTER/MEMORY
12
ABC
3
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
010
>
_
_
9
WXYZ
DEF
:9
SD
OPE
REC
PAUSE
VOLUME
DISPLAY
CHARA
: 9
ENTER/MEMORY
MENU
SPACE
!" #
Erasing tracks
Preparation:
≥Press [∫, OPR OFF, FUNCTION] to select SD.
≥Release the write-protect switch (➡page 8).
1 Press [MENU].
“EDIT?”is displayed.
2 Press [ENTER/MEMORY].
3 Press [:] or [9] to select how to
erase tracks.
∫TRACK ERASE: Erase one track at a time
(1) Select “TRACK ERASE?”.
(2) Press [ENTER/MEMORY].
(3) Press [:] or [9] to select the track you
want to delete.
(4) Press [ENTER/MEMORY].
If you selected the wrong track
Press [:] or [9] to select “CANCEL?”and
press [ENTER/MEMORY].
∫
ALL TRACK ERASE: Erase all tracks on the card
(1) Select “ALL ERASE?”.
(2) Press [ENTER/MEMORY].
4 After confirming the item to be erased,
press [ENTER/MEMORY].
Erasing is complete when ”CARD Writing”goes out.
After erasing one track, you can continue to erase
other tracks. Repeat the steps from step 3 and press
[MENU] when you are finished.
After erasing all tracks, editing ends automatically.
To stop partway
Press [MENU] before step 4.
Note:
≥ALL ERASE can take several minutes (10 or more in
some cases) if there are a number of tracks on the card
or if it has a large volume.
≥You cannot erase tracks that are in play lists created on
computer software (e.g., Panasonic Media Manager).
Formatting SD cards
CD
All data is erased when you format a card, includ-
ing data recorded with other equipment.
Preparation:
≥Press [∫, OPR OFF, FUNCTION] to select SD.
≥Release the write-protect switch (➡page 8).
1 Press [MENU].
“EDIT?”is displayed.
2 Press [ENTER/MEMORY].
3 Press [:] or [9] to select “CARD
FORMAT?”.
4 Press [ENTER/MEMORY].
5 Press [ENTER/MEMORY].
Formatting is complete when “CARD Writing”goes
out.
To stop partway
Press [MENU] before step 5.
Anti-Skip System
This system uses digital compression technology to save
CD audio data in the memory (a maximum of 48 sec-
onds) and uses this data to fill in gaps caused by bumps
or vibration.
1 Press [MENU] while stopped.
2 Press [:] or [9] to select “ANTI
SKIP ON/OFF?”.
3 Press [ENTER/MEMORY].
The current settings appears.
4 Press [:] or [9] to select “ON?”
or “OFF?”.
5 Press [ENTER/MEMORY].
Note:
≥If bumps or vibration continue, the elapsed play time
disappears and play is interrupted.
≥The disc rotates faster while the system is on so there
may be a slight increase in disc rotation noise.
≥The anti-skip system switches off automatically during
recording, but switches back on when you are finished.

18
RQT6457
Reference
Changing the display
Press [DISPLAY, CHARA].
∫CD
The current anti-skip (➡page 17) setting appears for
3 seconds.
∫SD
Each time you press the button:
§Data types: data recorded on this unit is AAC
(advanced audio coding).
This unit can also play MP3 (MPEG-1, MPEG-2 audio
layer 3) and WMA (Windows Media Audio) recorded on
other equipment.
Note:
“∑”is displayed in place of characters this unit cannot
display.
∫While on standby to record from a CD
Note:
§“MEM”is displayed when recording a CD program
(➡page 11).
∫While recording from a CD
Note:
There may be some difference between the recording
time and CD play time.
MENU
ENTER/MEMORY
12
ABC
3
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
010
>
_
_
9
WXYZ
DEF
:9
SD
OPE
REC
PAUSE
VOLUME
DISPLAY
CHARA
: 9
ENTER/MEMORY
MENU
SPACE
!" #
DISPLAY
CHARA
Convenient functions
Adjusting the contrast of the
display
1 Press [MENU] while stopped.
2 Press [:] or [9] to select
“DISPLAY CONTRAST?”.
3 Press [ENTER/MEMORY].
4 Press [:] to reduce the contrast or
[9] to increase the contrast.
5 Press [ENTER/MEMORY].
The operation tones
A “beep”sounds when you press buttons on the remote
control. You can turn this tone off.
1 Press [MENU] while stopped.
2 Press [:] or [9] to select “BEEP
ON/OFF?”.
3 Press [ENTER/MEMORY].
The current setting is shown.
4 Press [:] or [9] to select “ON?”
or “OFF?”.
5 Press [ENTER/MEMORY].
Track title
Artist
Data type§and bitrate
(during play)
Total number of tracks,
Total play time, card title
Track number on SD
CD track where recording
starts and last track on CD§
Total CD play time
Elapsed recording time Elapsed CD play time
REC
CD SD SP
REC
CD SD SP
REC
CD SD SP
REC
CD SD SP
(after 3 seconds)

19
RQT6457
Reference
Using the unit with
other equipment
Connecting the unit to an audio system Input
LINE IN: 3.5-mm stereo jack
Input level: SENS H: j10n2 dBV
SENS L: j1n2 dBV
MIC: 3.5-mm stereo jack
Impedance: 200 to 600 ≠
Output
Headphone: 3.5-mm stereo jack
Output level: RMS max. 7mWi7mW (16 ≠)
Power supply:
Batteries: DC 3V (two AA, LR6 alkaline batteries)
AC adaptor:
Input: AC 120 V (For U.S.A. and Canada)
AC 230–240 V (For United Kingdom)
AC 220–230 V (For Continental Europe)
AC 110 V/127 V/220–240 V (For other areas)
Output: DC 4.5 V
Power consumption:
Using included AC adaptor:
3.0 W (For U.S.A. and Canada)
3.2 W (For United Kingdom and Europe)
2.6 W (For others)
Recharging: 4.3 W (For U.S.A. and Canada)
4.8 W (For United Kingdom and Europe)
4.3 W (For others)
Dimensions (WtHtD): 140k27k133 mm
(51/2qk11/16qk51/4q)
Mass: 347 g(12.24 oz.) (With batteries)
300 g(10.58 oz.) (Without batteries)
Approximate operating times in hours:
Recharging time: 3 to 4 hours
≥CD play and recording times measured with S-XBS
canceled, at 25 oC, on a flat, stable surface.
≥Actual operating times depend on operating conditions.
≥Play time is reduced when playing CD-RW.
Batteries
Alkaline
batteries
(LR6)
Recharge-
able Ni-cd
batteries
CD
play
25
12
SD
play
30
14
Recording
(from a CD
in this
unit)
4.5
3
SDMUSIC RECORDERSV-SR100
MENU
ENTER/
MEMORY
1
2
ABC
3
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
0
10
>
_
_
9
WXYZ
DEF
:9
REC
PAUSE
VOLUME
DISPLAY
CHARA
SDOPEN
1
SD
1
CD
1
/
;
R OFF
CTION
DEL
∫
-XBS
MODE
HOLD
MIC
Ë
L
R
VOL
SPACE
!"#
Turn off this unit and the other equipment before
connection.
≥Do not connect the cable to the PHONO jacks on an
amplifier.
≥Turn the operation tones off so they are not heard when
you press buttons on the remote control (➡page 18).
≥Set the volume to 10. Make further volume adjustments
with the other equipment.
≥Obtain the optional connecting cable if the other equip-
ment comes with mini-phone jacks.
≥It you connect speakers (active or otherwise) directly to
the unit’s headphone jack, ensure they have an imped-
ance of 1 k≠or less.
Specifications
SD Audio compatible data formats:
Playback: AAC, MP3, WMA
Recording: AAC
CD playback format: CD-DA
Number of channels: 2, stereo
Frequency response: 20 to 20,000 Hz
(i0 dB to j7 dB)
CD:
D/A converter: MASH (1 bit DAC)
Beam source: Semiconductor laser
Wave length: 780 nm
(NORSK)
Bølgelengde 780 nm
Laser-styrke Ingen farlig strålning sendes ut
(med sikkerhets-beskyttelse)
Other equipment
White
Red
Headphone jack
[Ë]Stereo connection
(phono) cable
(not included)
AUX IN
Note:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Power consumption in standby mode
For U.S.A. and Canada: 1.9 W
For United Kingdom: 2.0 W
For Continental Europe: 2.1 W
For other areas: 1.5 W
Connect through remote control to the [Ë]
jack.
The unit may malfunction if you connect this
cable directly to the unit.

20
RQT6457
Reference
Displays
Reference pages are shown as black circled numbers (A).
This track has SCMS copyright protection and cannot be recorded on this
unit.
This track has “watermark”copyright protection and cannot be recorded on
this unit.
You cannot edit at this time. Follow the instructions on the second line.
The card contains data this unit cannot process. Erase the data with the
equipment used to record it.
You cannot record at this time. Follow the instructions on the second line.
The card’s memory is full. Erase unneeded tracks Aor use another card.
The card’s write-protect switch is engaged. Release it 8.
The CD lid is open. Close it.
The data on the card cannot be used or is corrupted. Reformat the card
Aor use another one.
A problem has occurred with the unit’s circuitry. Consult a qualified
serviceperson or your dealer.
An error has occurred. Try reinserting the card, turning the unit off, or
reinserting the batteries. If this doesn’t remedy the situation reformat the
card A.
A problem has occurred with the unit’s circuitry. Consult a qualified
serviceperson or your dealer.
This card cannot be used. Insert another one.
The card doesn’t have enough memory to record all of the tracks, but you
can still go on with recording. Erase unneeded tracks A, use another card,
or change the recording mode =.
You haven’t inserted a card.
You haven’t inserted a disc.
You haven’t entered an artist name @.
There is no title for the track or card @.
The card doesn’t contain audio data. Record tracks on the card or replace it
with one that already has tracks on it.
The title contains characters this unit cannot display.
The unit cannot play the data. Rerecord it using a format this unit can play 8 .
The unit cannot play the data or card itself. Reformat or replace the card.
The unit is processing data. Wait until the display disappears.
The SD lid is open. Close it.
The unit has detected an error. Consult a qualified serviceperson or your
dealer if this appears regularly.
You are entering titles and the maximum number of characters has been
reached @.
You are about to edit a title that has more than 60 characters. If you
continue, text over the character limit will be deleted.
You have reached the maximum number of 998 tracks (or the card is full
for some other reason), so you cannot record anymore. Erase unneeded
tracks Aor use another card.
The card is not formatted. Format it with this unit A.
The batteries are depleted. Replace or recharge them, or power the unit
with the AC adaptor.
Can’t COPY SCMS
Can’t COPY WM
Can’t EDIT
Can’t ERASE
Can’t REC
CARD FULL
CARD PROTECT
CD OPEN
DATA ERROR
DIGITAL IN UNLOCK
ERROR
F15
LOCKED
MEMORY SHORT
NO CARD
NO DISC
NO INFO.
NO TITLE
NO TRACK
NotDISPLAY
NotPLAY
NotSUPPORT
Now Busy
SD OPEN
SYSTEM ERROR
TEXT FULL
TEXT OVER
TRACK FULL
UNFORMAT
U01
LOW BATTERY