Panasonic KX-HCM280A Specification sheet

Additional Feature table
The following features have been added to the camera. Read the Operating
Instructions and this Additional Feature Guide on the Setup CD-ROM before using
the product.
Additional Features Contents Page
[For the U.S. model,
KX-HCM280A]
Manual Setup
Manual Setup can be selected on the
initial setting window of the Setup
Program on the CD-ROM even if
Automatic Setup (Local Access Only)
has not been performed.
page 3
Easier saving and viewing of
images
Buffered images can be downloaded
to PC and can be viewed using
viewer software.
page 4
SMTP authentication methods Support SMTP authentication when
setting [E-mail] for the transfer
method in Buffering or Transferring
Images by Timer, Alarm Signal or
Motion Detection Signal (except the
U.S. model, KX-HCM280A), or when
setting Alarm Log notification (except
the U.S. model, KX-HCM280A), has
been added.
page 5
Simplified Chinese and Korean Simplified Chinese is supported.
Korean is supported on limited
pages.
page 8
Additional Feature Guide
Network Camera

Additional Feature Guide
2
Trademarks
• SD mark is a trademark of the SD Card Association.
• This software is based in part on the work of the Independent JPEG Group.
• All other trademarks identified herein are the property of their respective
owners.
Abbreviations
• "Network Camera" is called "Camera" in this manual.
Your favorite banner and
website
An image and its linked website can
be specified for a banner on the
Image Display page.
page 9
Selfcamera registration This camera can be registered on the
Multi-Camera page without having to
enter all the details.
page 11
Support of the 2 GB SD Memory
Card (SD Memory Card-
compatible cameras only)
The camera supports the 2 GB SD
Memory Card.
page 12
Additional Features Contents Page

Additional Feature Guide
3
[For the U.S. model, KX-HCM280A] Manual Setup
Manual Setup can be selected on the initial setting window of the Setup Program
on the CD-ROM even if Automatic Setup (Local Access Only) has not been
performed.

Additional Feature Guide
4
Easier saving and viewing of images
Buffered images can be downloaded to PC and can be viewed using viewer
software.
[Download]
Specify the number of images you want to download and click the download button
to save the images to a specific location. Then use the viewer software to view the
images. Viewer software can be downloaded from the Panasonic Network Camera
support website at http://panasonic.co.jp/pcc/products/en/netwkcam/
Viewer software window

Additional Feature Guide
5
SMTP authentication methods
Support SMTP authentication when setting [E-mail] for the transfer method in
Buffering or Transferring Images by Timer, Alarm Signal or Motion Detection
Signal, or when setting Alarm Log notification, has been added. In accordance with
this addition, the authentication setting page has been modified. Note that the U.S.
model, KX-HCM280A, does not have the Motion Detection and Alarm Log
Notification features.
• The page when setting [E-mail] for the transfer method in Buffering or
Transferring Images by Timer, Alarm Signal or Motion Detection Signal.

Additional Feature Guide
6
• The page when setting Alarm Log notification (except the U.S. model,
KX-HCM280A).

Additional Feature Guide
7
Setting Description
How to
authenticate
The authentication method can be selected:
[No authentication], [POP before SMTP authentication] or
[SMTP authentication].
POP server authentication may be required by your ISP. In
that case, set POP before SMTP authentication.
• No authentication: No authentication when sending an e-
mail.
• POP before SMTP authentication: Some SMTP servers
that send e-mails do not have an authentication feature.
Therefore, the camera uses the authentication of a POP
server that receives e-mails, before sending e-mails.
– POP3 Server
IP Address or
Host Name*1:
*1 Note that [Space], ["], ['], [&], [<] and [>] are not available.
If you set a server IP address, set 4
numbers (0—255) and 3 periods, such as
"192.168.0.253". Note that "0.0.0.0" and
"255.255.255.255" are not available. Or
set a host name (0—255 characters).
You can set an IPv6 address.
– Port No.: Enter a number (1—65535). Usually set
to 110.
–LoginID
*2:
*2 Note that ["] is not available.
If your ISP requires a login ID to log in to
a POP3 server, set it (1—63 characters).
– Password*2:If your ISP requires a password to log in to
a POP3 server, set it (0—63 characters).
• SMTP authentication: Users are authenticated by user
name and password on the SMTP server. Your ISP must
support the SMTP authentication. The supported SMTP
authentications of the camera are the LOGIN and PLAIN
authentications. The CRAM-MD5 authentication is not
supported.
–LoginID
*2:If your ISP requires a login ID to log in to
an SMTP server, set it (1—63 characters).
– Password*2:If your ISP requires a password to log in to
an SMTP server, set it (0—63 characters).

Additional Feature Guide
8
Simplified Chinese and Korean
Simplified Chinese can be displayed on all pages and Korean can be displayed on
limited pages.
Setting Description
Language • Select the initial language from English, Japanese, French,
German, Italian, Spanish, Simplified Chinese, Russian or
Korean. The selected language is displayed as the initial
language on the Top, Single Camera, Multi-Camera and
Buffered Image pages. If you select English, Japanese or
Simplified Chinese, all pages will be displayed in the
corresponding language. If you select another language,
the Setup, Maintenance and Support pages will be
displayed in English only.

Additional Feature Guide
9
Your favorite banner and website
A banner of your choice can be displayed on the Single Camera page. A URL can
also be linked to this banner. The users can click the banner to access the URL.

Additional Feature Guide
10
Setting Description
Banner Display When checked to [Enable], the setting will be enabled.
When unchecked, the setting will be disabled.
Note
• When the Banner Display is enabled, the camera
accesses the Image URL every time the Single
Camera page is displayed. The intermittent and
continuous switching of the Single page burdens
the PC that stores the image linked with the URL.
• If the image URL linked with an image stored in a
PC that requires an authentication is set, the
authentication window will be displayed when
displaying the Single Camera page.
• Banner user •All users :The banner can be displayed for
all users.
Administrator only :The banner can be displayed for
the administrator only.
General user only :The banner can be displayed for
the general user only.
• Image URL*1
*1 Note that [Space], ["], ['], [&], [<], and [>] are not available.
•Enter the image URL (1—127 characters) you want to
display as a banner. When [Enable] is checked, enter
the image URL.
• Link URL*1 •Enter the target URL (0—127 characters) you want to
display when clicking the banner.