Panasonic SCAK340 - HES SYSTEM User manual

Operating Instructions
CD Stereo System
Model No. SC-AK340
SC-AK240
The illustrations show SC-AK340.
RQTV0070-1M
L1105KE1115
GCP En Sp
Table of contents
IMPORTANT SAFETY INSTRUCTIONS ..3
Placement of speakers............................3
Getting started.........................................4
Overview of controls...............................6
Discs.........................................................7
Cassette tape – Play and record ..........11
Radio.......................................................13
Microphone mixing................................14
Timer.......................................................15
Sound adjustment .................................16
External unit...........................................17
Maintenance...........................................17
When moving the unit...........................17
Troubleshooting guide..........................18
Specifications ........................................19
SUPPLIED ACCESSORIES
SUPPLIED ACCESSORIES
Please check and identify the supplied accessories.
1 x AC power supply cord
2 x Remote control batteries
1 x Power plug adaptor
1 x FM indoor antenna
1 x AM loop antenna
1 x Remote Control
(N2QAHB000065)
Before connecting, operating or adjusting this product,
please read the instructions completely.
Please keep this manual for future reference.
Operations in these instructions are described mainly
using remote control, but you can do the operations on
the main unit if the controls are the same.
Unless otherwise indicated, illustrations in these
operating instructions are of SC-AK340.
Your unit may not look exactly the same as illustrated.
RQTV0070-M_1EN.indd 1RQTV0070-M_1EN.indd 1 11/25/05 1:35:48 PM11/25/05 1:35:48 PM

2
RQT8043
RQTV0070
LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these
instructions carefully.
These operating instructions are applicable to the following
systems.
AK340 : indicates features applicable to SC-AK340 only.
AK240 : SC-AK240 only.
System SC-AK340 SC-AK240
Main unit SA-AK340 SA-AK240
Speakers SB-AK340 SB-AK240
Inside of product
RQTV0070-M_1EN.indd 2RQTV0070-M_1EN.indd 2 11/18/05 11:55:55 AM11/18/05 11:55:55 AM

3
RQT8043
RQTV0070
LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
Placement of speakers
AK340
Place the front speakers so that the tweeter is on the
inside. Tweeter
AK240
Speakers are designed identically so that no left or right
channel orientation is necessary.
You cannot take the front net off the speakers.
Use only the supplied speakers.
The combination of the main unit and speakers provide the best
sound. Using other speakers can damage the unit and sound
quality will be negatively affected.
Note:
• Keep your speakers at least 10mm away from the system for proper
ventilation.
• These speakers do not have magnetic shielding. Do not place them
near televisions, personal computers or other devices easily influenced
by magnetism.
• You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
• Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When adjusting the sound quality.
Caution
• Use the speakers only with the recommended system.
Failure to do so can damage the amplifier and speakers,
and can cause fire. Consult a qualified service person if
damage occurs or if a sudden change in performance is
apparent.
• Do not attach these speakers to walls or ceilings.
RQTV0070-M_1EN.indd 3RQTV0070-M_1EN.indd 3 11/16/05 2:37:30 PM11/16/05 2:37:30 PM

4
RQT8043
RQTV0070
LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH
(L)
(R)
Getting started
Step 1
Step 1
- Making the connections
- Making the connections
Connect the AC power supply cord only after all other connections have been made.
1 Connect the AM loop antenna.
Stand the antenna
up on its base.
2 Connect the FM indoor antenna.
Tape the antenna where reception is best.
Adhesive
tape
3 Connect the speaker cords.
Grey (+)
Blue (–)
Grey
Blue Black
Red
Red (+)
Black (–)
Black
Red
Red (+)
Black (–)
AK340 AK240
Connect
the left (L)
side in the
same way
Connect
the left (L)
side in the
same way
4 Voltage selector.
Use a flat-head screwdriver to set the voltage
selector on the rear panel to the appropriate
position for the area in which this system is used.
5 Connect the AC power supply cord.
Insertion of connector
Even when the connector is perfectly inserted, depending on
the type of inlet used, the front part of the connector may jut
out as shown in the drawing. However there is no problem
using the unit.
Connector
Appliance inlet
If the power plug does not fit your socket, use the power plug
adaptor (included).
For your reference
To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet. You will need to reset
some memory items after plugging in the unit.
Note:
The included AC power supply cord is for use with this unit only.
Do not use it with other equipment.
To household AC outlet
RQTV0070-M_1EN.indd 4RQTV0070-M_1EN.indd 4 11/16/05 2:37:44 PM11/16/05 2:37:44 PM

5
RQT8043
RQTV0070
LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH
Optional antenna connections
Optional antenna connections
Use outdoor antenna if radio reception is poor.
Note:
Disconnect the outdoor antenna when the unit is not in use. Do not use the outdoor antenna during a lightning storm.
FM outdoor antenna AM outdoor antenna



Rear panel
of this unit
FM outdoor antenna
(not included)
75 Ωcoaxial cable
(not included)
Shield braid
Core wire
30 mm
15 mm
Rear panel
of this unit
AM outdoor antenna (not included)
AM loop antenna
(included)
5-12 m
• Disconnect the FM indoor antenna.
• The antenna should be installed by a competent
technician.
• Run a piece of vinyl wire horizontally across a window or
other convenient location.
• Leave the loop antenna connected.
Step 2
Step 2
- Inserting batteries into the remote control
- Inserting batteries into the remote control
AA/R6/LR6
■Batteries
• Insert so the poles (+ and –) match those in the remote control.
• Remove if the remote control is not going to be used for a long period of time.
Store in a cool, dark place.
• Replace if the unit does not respond to the remote control even when held
close to the front panel.
• Do not use rechargeable type batteries.
• Mishandling of batteries in the remote control can cause electrolyte leakage,
which may cause a fire.
• If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any part of
your body.
Do not:
• mix old and new batteries.
• use different types at the same time.
• heat or expose to flame.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
• put heavy objects on the remote control.
• spill liquids onto the remote control.
■Use
Aim at the remote control sensor, avoiding obstacles, at a maximum range
of 7 m directly in front of the unit.
Refer to page 6 for the remote control sensor position.
Step 3
Step 3
- DEMO function
- DEMO function
When the unit is first plugged in, a demonstration of its functions may be shown
on the display.
If the demo setting is off, you can show a demonstration by selecting “DEMO
ON”.
Press and hold [DISPLAY, –DEMO].
The display changes each time the button is held down.
NO DEMO (off) ÔDEMO ON (on)
While in standby mode, select “NO DEMO” to reduce power consumption.
Note:
DEMO function cannot be turned on when Dimmer is on.
RQTV0070-M_1EN.indd 5RQTV0070-M_1EN.indd 5 11/16/05 2:37:52 PM11/16/05 2:37:52 PM