Panasonic SB-W335EG User manual

ORDERNO. MD0506270C8
Subwoofer System
SB-W335EG
Colour
(S)... Silver Type
SPECIFICATIONS
Specification
1

Type 1way, 1speaker system (Bass-ref.)
Speaker unit(s) Impedance 4
Subwoofer 16 cm Conetype
Input power (IEC) 90 W(Max)
Output sound pressure 80 dB/W(1.0m)
Frequencyrange 29 Hz - 173 Hz (-16 dB)
33 Hz - 148 Hz (-10 dB)
Dimensions(WxH xD) 175 mm x345 mm x295 mm
Mass 3.3kg
Notes :
1. Specificationsaresubject to changewithoutnotice.
2. Mass and dimensionsareapproximate.
ForHT330
System : SC-HT330EB-
S
MusicCenter : SA-HT330EB-S
Front Speaker : SB-FS335EG-S
Surround Speaker : SB-FS335EG-S
Center Speaker : SB-PC335EG-S
ActiveSubwoofer : SB-W335EG-S
System : SC-
HT330GCPS
MusicCenter : SA-HT330GCPS
Front Speaker : SB-FS335EG-S
Surround Speaker : SB-FS335EG-S
Center Speaker : SB-PC335EG-S
ActiveSubwoofer : SB-W335EG-S
System : SC-
HT330GCSS
MusicCenter : SA-HT330GCSS
Front Speaker : SB-FS335EG-S
Surround Speaker : SB-FS335EG-S
Center Speaker : SB-PC335EG-S
ActiveSubwoofer : SB-W335EG-S
System : SC-
HT330GCTS
MusicCenter : SA-HT330GCTS
Front Speaker : SB-FS335EG-S
Surround Speaker : SB-FS335EG-S
Center Speaker : SB-PC335EG-S
ActiveSubwoofer : SB-W335EG-S
System : SC-HT330GN-
S
MusicCenter : SA-HT330GN-S
Front Speaker : SB-FS335EG-S
Surround Speaker : SB-FS335EG-S
Center Speaker : SB-PC335EG-S
ActiveSubwoofer : SB-W335EG-S
System : SC-HT330GS-
S
MusicCenter : SA-HT330GS-S
Front Speaker : SB-FS335EG-S
Surround Speaker : SB-FS335EG-S
Center Speaker : SB-PC335EG-S
ActiveSubwoofer : SB-W335EG-S
2

System : SC-HT330GC-
S
MusicCenter : SA-HT330GC-S
Front Speaker : SB-FS335EG-S
Surround Speaker : SB-FS335EG-S
Center Speaker : SB-PC335EG-S
ActiveSubwoofer : SB-W335EG-S
ForHT335
System : SC-HT335E-S MusicCenter : SA-HT335E-S
Front Speaker : SB-FS335EG-S
Surround Speaker : SB-FS335EG-S
Center Speaker : SB-PC335EG-S
ActiveSubwoofer : SB-W335EG-S
System : SC-HT335EE-
S
MusicCenter : SA-HT335EE-S
Front Speaker : SB-FS335EG-S
Surround Speaker : SB-FS335EG-S
Center Speaker : SB-PC335EG-S
ActiveSubwoofer : SB-W335EG-S
System : SC-HT335EG-
S
MusicCenter : SA-HT335EG-S
Front Speaker : SB-FS335EG-S
Surround Speaker : SB-FS335EG-S
Center Speaker : SB-PC335EG-S
ActiveSubwoofer : SB-W335EG-S
2005 Matsushita ElectricIndustrial Co. Ltd.. All rights reserved.
Unauthorized copying and distribution isaviolation of law.
1. Disassembly Process
1.1. Disassemblyof the Front Cabinet Assembly
3

Step1: Slot ina steel rulertomake a gapallowance betweenthe Front Cabinet Assemblyand
the SpeakerCabinet Assemblyas arrowshown.
Step2: Slot a piece of wood chipinbetweenthe Front Cabinet Assemblyand the steel ruleras
arrowshown.
Step3: Use the screwdrivertoslightlylift up the Front Cabinet Assemblyas arrowshown.
Ensure that the screwdriveris above the wood chipblock whendoing the process.
4

Note:
Be careful withthe bosses whichare gluedtothe SpeakerCabinet Assembly.
Step4: Remove the Front Cabinet Assemblyfromthe SpeakerCabinet Assemblyas arrow
shown.
1.1.1. Assemblyof the Front Cabinet Assembly
Step1: Cleanup the remaining glue at the 8 bosses as arrowshownand replace withthe
normal glue.
5

Step2: Replace the Front Cabinet Assemblyfirmlyback tothe SpeakerCabinet Assembly.
1.2. Disassemblyof the Woofer
Step1: Remove all 4 screws fromthe WooferGuard.
Step2: Take out the WooferfromSpeakerCabinet Assemblyas arrowshown.
6

Step3: Remove the Wooferbydetaching the (+) white and (-) blue wires.
2. Connection of the Speaker Cables
-Besure to connect speaker cables before connecting the AC
power supplycord.
-The load impedance of anyspeaker used with thisunitmust be 4 .
-Besure to connect the cablefrom the right speaker to the right
terminal and the cablefrom the left speaker to the left terminal.
1. Stripoff the outer covering, and twist the center conductor. Make
sure the bare ends of the wires are not unravelled. (Iftheyare,
twist them tight again.)
2. Insert the wire to the rear panel of the unitand close the lever.
7

Notes :
-To prevent damage to circuitry, never short-circuitpositive (+)and
negative (-) speaker wires.
-Besure to connect onlypositive (white) wires to positive (+)
terminalsand negative (blue) wires to negative (-) terminals.
Incorrect connection can damage the speakers.
3. Connection of Wiring Diagram
4. Cabinet Parts Location
8

5. Replacement Parts List
Notes :
-Important safetynotice :
When replacing anyof these components, be sure to use only
manufacturer’sspecified parts showninthe parts list.
-[M] indicates inthe Remarks columns indicates parts supplied by
PAVCSG.
Ref. No. PartNo. PartName& Description Remarks
CABINETAND CHASSIS
1RYBX0100-S FRONTCABINETASS’Y [M]
2RFKHBW335EGS SPK CABINETASS’Y [M]
3RMVX0090 WOOFER GUARD [M]
4RGNX0287-K SPEC LABEL [M]
5RKA0072-KJ LEG CUSHION [M]
6XTB4+25AF-K SCREW [M]
7RMFX0044 HIMELON (LONG) [M]
8RMFX0045 HIMELON (SHORT) [M]
9RMQX0135-1 EVAPACK (PORT) [M]
10 RMQX0136 EVAPACK (WOOFER) [M]
ACCESSORIES
A1 REEX0449B-1J SPEAKER CORD 4M [M]
A2 REEX0449E-1J SPEAKER CORD 8M [M]
PACKING MATERIALS
P1 RPNX0327 POLYFOAMSET(3PCS) [M]
P2 RPFX0138 MIRAMATBAG [M]
9

Ref. No. PartNo. PartName& Description Remarks
SPEAKER
SP1 L0AA16A00017 WOFFER UNIT [M]
6. Packaging (SB-HT335EG-S & SB-W335EG-S)
Note: The diagrambelowshows the packaging forSB-HT335EG-S & SB-W335EG-S.
10