Panasonic KX-T7740 User manual

DSS Console
Quick Reference Guide
Model No. KX-T7740
When using the KX-T7740, keep the following
in mind.
• If there is any trouble, disconnect the DSS
Console from the telephone line and have it
repaired.
• Keep the unit away from heating appliances and
electrical noise generating devices such as
fluorescent lamps and motors.
• The unit should be kept free of dust, moisture
and vibration, and it should not be exposed to
direct sunlight.
• Do not use benzine, thinner, or the like, or any
abrasive powder to clean the cabinet. Wipe it
with a soft cloth.
• Do not disassemble this unit. Dangerous
electrical shock could result. The unit must only
be disassembled and repaired by qualified
service technicians.
• When a failure occurs which exposes any
internal parts, disconnect the telephone line cord
immediately, and return the unit to your
maintainer.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR ANY TYPE OF MOISTURE.
Note:
In this manual, the suffix of each model number is
omitted.
Please read this manual before using, and
save for future reference.
Important Information

2
When you ship the product
Carefully pack and send it prepaid, adequately
insured and preferably in the original carton. Attach a
postage-paid letter, detailing the symptom to the
outside of the carton.
DO NOT send the product to the Executive or
Regional Sales offices. They are NOT equipped to
make repairs.
Product service
Panasonic Factory Servicenters for this product are
listed in the servicenter directory. Consult your
authorized Panasonic dealer for detailed instructions.
Included Accessories: for extra orders, call
toll free 1-800-332-5368
Telephone Line Cord . . . . . . . . . . . . . . . . . . . . . . . 1
Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Attachment Plate . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

3
1 F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
F14
F15
F16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DSS Buttons with Busy
Lamp Field (BLF):
To access an extension,
simply press the DSS button.
The BLF indicates the current
status of the corresponding
extension. These buttons can
also be assigned for one-touch
dialing.
Function Buttons:
You can access various
functions with one touch
once the buttons are
programmed.
For programming, refer to
the user manual of the
main unit.
The telephone line cord
To the main unit
< Back view >
CAUTION
Ensure the cord is inserted in the groove to
prevent damage to the connector.
The KX-T7740 DSS
Console should always
be used in conjunction
(side by side) with a
Panasonic proprietary
telephone (e.g.,
KX-T7720, KX-T7730,
KX-T7735, KX-T7750)
for proper operation.
The devices must be
associated through
programming. For
programming, consult
your dealer.
Location of Controls
Connection

4
This unit can be connected to a Panasonic proprietary
telephone (e.g., KX-T7720, KX-T7730, KX-T7735, KX-
T7750). Use the enclosed plate and screws.
Attaching a Proprietary Tele-
This unit can be mounted on a wall.
1 Remove the attached stand.
2 Mount the unit on the wall.
1
2
Wall Mounting

5
When using this unit, basic safety precautions
should always be followed to reduce the risk of
fire, electric shock, or personal injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked
on this unit.
3. Unplug this unit from the main unit before
cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this unit near water, for example,
near a bathtub, washbowl, kitchen sink, or
the like.
5. Place this unit securely on a stable surface.
Serious damage and/or injury may result if
the unit falls.
6. Do not cover slots and openings on the unit.
They are provided for ventilation and
protection against overheating. Never place
the unit near radiators, or in a place where
proper ventilation is not provided.
7. Do not allow anything to rest on the
extension cord. Do not locate this unit where
the cord will be abused by persons walking
on it.
8. Do not overload wall outlets and extension
cords. This can result in the risk of fire or
electric shock.
9. Never push any objects through slots in this
unit. This may result in the risk of fire or
electric shock. Never spill any liquid on the
unit.
10.To reduce the risk of electric shock, do not
disassemble this unit. Take the unit to an
authorized servicenter when service is
required. Opening or removing covers may
expose you to dangerous voltages or other
risks. Incorrect reassembly can cause
electric shock when the unit is subsequently
used.
11.Unplug this unit from the main unit, and refer
servicing to an authorized servicenter when
the following conditions occur:
A. When the extension cord is damaged or
frayed.
B. If liquid has been spilled into the unit.
C. If the unit has been exposed to rain or water.
Important Safety Instructions

6
D. If the unit does not work normally by following
the manual. Adjust only controls covered by
the manual. Improper adjustment may require
extensive work by an authorized servicenter.
E. If the unit has been dropped, or physically
damaged.
F. If the unit exhibits a distinct change in
performance.
12.During thunderstorms, avoid using
telephones except cordless types. There
may be a remote risk of an electric shock
from lightning.
13.Do not use this unit to report a gas leak,
when in the vicinity of the leak.
SAVE THESE
INSTRUCTIONS
Important Safety Instructions

7
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment
generates, uses, and can radiate radio frequency en-
ergy and, if not installed and used in accordance with
the instructions, may cause harmful interferenceto ra-
dio communications. However, there is no guarantee
that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference
to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV
technician for help.
CAUTION:
To assure continued compliance with FCC rules, do
not make any unauthorized modifications. When
programming emergencynumbers and/or makingtest
calls to emergency numbers:
1) Remain on the line, and briefly explain to the
dispatcher the reason for the call before hanging
up.
2) Perform such activities in the off- peak hours,
such as early morning hours or late evenings.
FCC Information

© 2002 Kyushu Matsushita Electric Co., Ltd.
All Rights Reserved.
Printed in the United Kingdom PSQW1922ZA KK0902YS0
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of
America
One Panasonic Way, Secaucus,
New Jersey 07094
www.panasonic.com
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65deInfantería, Km. 9.5,
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
SERIAL NO.
(found on the bottom of the unit)
DATE OF PURCHASE
NAME OF DEALER
DEALER S ADDRESS
DEALER S TEL. NO.
For your future reference