Panasonic KX-TD161 - Doorphone/Door Opener Interface... User manual

Installation Instructions
Doorphone Card Model KX-TD161
Please read this manual before installing the card.
KX-TD161.book 1 ページ ２００１年８月２９日 水曜日 午後２時１５分

2
Thank you for purchasing the Panasonic Card.
Doorphone Card
Supports 4 doorphones and 4 door openers. The
doorphone is an option (KX-T30865).
Location of the Card . . . . . . . . . . . . . . . . . . . . . 3
Installation for the Card . . . . . . . . . . . . . . . . . . 5
Doorphone Card . . . . . . . . . . . . . . . . . . . . . . . . . 7
Contents
KX-TD161.book 2 ページ ２００１年８月２９日 水曜日 午後２時１５分

3
Location of the Card
The location of the optional card is shown below.
Precaution: To protect the printed circuit boards (P-
boards) from static electricity, do not touch
parts on the P-boards in the main unit and
on the optional cards.
Doorphone
Card
Connector
Doorphone
Card
Front cover is open.
KX-TD816
KX-TD161.book 3 ページ ２００１年８月２９日 水曜日 午後２時１５分

4
DOORPHONE
Doorphone
Card Connector Doorphone
Card
Front cover is open.
KX-TD1232
KX-TD161-02.fm 4 ページ ２００１年８月２９日 水曜日 午後３時２７分

5
1. Set the power switch on the main unit to the OFF
position and disconnect the power cord from the AC
outlet.
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
Disconnect
from
AC outlet
Disconnect
from
AC outlet
Power Switch
Panasonic
Power Switch
D816
DIGITAL SUPER HYBRID SYSTEM
Installation for the Card
KX-TD161.book 5 ページ ２００１年８月２９日 水曜日 午後２時１５分

6
2. Loosen the two screws on the right side of the main unit
and open the front cover in the direction of arrow .
Note
•The two screws are attached to the front cover
with springs so that they will not be lost.
3. To install the Doorphone Card, see page 7.
4. Close the front cover and screw.
5. Connect the power cord to the AC outlet and then
set the Power Switch on the main unit to ON
position.
A
D1232
DIGITAL SUPER HYBRID SYSTEM
Panasonic
A
Panasonic
D816
DIGITAL SUPER HYBRID SYSTEM
A
screw
screw
screw
screw
KX-TD161.book 6 ページ ２００１年８月２９日 水曜日 午後２時１５分

7
Before installing the Doorphone Card to the main unit,
install the Doorphone (KX-T30865). For details about
the doorphone, refer to the Installation Manual.
1.
Connect two 4-conductor modular connectors to the
Doorphone Card Cabinet, and pass the cords through
the grooves in the cabinet.
2. Attach the Doorphone Card Cabinet to the main unit
and press down.
Doorphone Card
KX-TD161.book 7 ページ ２００１年８月２９日 水曜日 午後２時１５分

8
3. Connect the cord to the Doorphone Card Connector.
KX-TD1232 KX-TD816
To Terminal Box
Installation
KX-TD161.book 8 ページ ２００１年８月２９日 水曜日 午後２時１５分

9
Wiring of the Doorphone
1. Connect the Doorphone Card to the terminal box
using two 4-conductor modular connectors.
2. Connect the wires of doorphone 1 to the red and
green screws of the terminal box.
3. Connect the wires of doorphone 2 to the yellow and
black screws of the terminal box.
4. Connect the wires of doorphone 3 to the red and
green screws of the terminal box.
5. Connect the wires of doorphone 4 to the yellow and
black screws of the terminal box.
KX-TD161.book 9 ページ ２００１年８月２９日 水曜日 午後２時１５分

10
4-conductor wiring
is required.
Doorphone 3
(KX-T30865) Doorphone 4
(KX-T30865)
Yellow
Red Black
Green
Terminal Box
Panasonic Panasonic
4-conductor wiring
is required.
Doorphone 1
(KX-T30865) Doorphone 2
(KX-T30865)
Yellow
Red Black
Green
Terminal Box
Panasonic Panasonic
View of Doorphone Connector Jack
Doorphone 1
Doorphone 3
Doorphone 2
Doorphone 4
KX-TD816
KX-TD161.book 10 ページ ２００１年８月２９日 水曜日 午後２時１５分

11
Note
•NB Colors shown on the above diagram indicate
the internal cable connections of the Terminal
Box.
4-conductor wiring
is required.
Doorphone 3
(KX-T30865) Doorphone 4
(KX-T30865)
Yellow
Red Black
Green
Terminal Box
Panasonic Panasonic
4-conductor wiring
is required.
Doorphone 1
(KX-T30865) Doorphone 2
(KX-T30865)
Yellow
Red Black
Green
Terminal Box
Panasonic Panasonic
View of Doorphone
Connector Jack
Doorphone 1
Doorphone 3
Doorphone 2
Doorphone 4
KX-TD1232
KX-TD161.book 11 ページ ２００１年８月２９日 水曜日 午後２時１５分

12
Connecting Door Openers
1. Loosen the screw to remove the cover.
2. Loosen the screws on the terminal strip.
KX-TD161.book 12 ページ ２００１年８月２９日 水曜日 午後２時１５分

13
3. Insert the wires coming from the door openers into
holes and tighten the screws.
Pass all the wires through the Holder.
Note
•Set the door opener paired with the doorphone.
•For wiring, UL 1015, AWG 22 twisted wire or the
equivalent is recommended.
•The wire should be between 1.2 mm and 2.4 mm
(3/64 inch and 3/32 inch) in diameter including
the coating.
To door opener 3
To door opener 4
Holder
To door opener 2
To door opener 1
D=1.2 mm-2.4 mm (3/64 inch-3/32 inch)
KX-TD161.book 13 ページ ２００１年８月２９日 水曜日 午後２時１５分

14
KX-TD161.book 14 ページ ２００１年８月２９日 水曜日 午後２時１５分

15
KX-TD161.book 15 ページ ２００１年８月２９日 水曜日 午後２時１５分

Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way, Secaucus,
New Jersey 07094
www.panasonic.com
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of
Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5,
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Copyright:
This manual is copyrighted by Kyushu Matsushita Electric
Co., Ltd. (KME). Under the applicable copyright laws, this
manual may not be reproduced in any form, in whole or part,
without the prior written consent of KME and its licensee.
© 2001 Kyushu Matsushita Electric Co., Ltd. All Rights Reserved.
Printed in the United Kingdom
PSQX2631ZA
KA0901HK0
KX-TD161.book 16 ページ ２００１年８月２９日 水曜日 午後２時１５分