Panasonic ET-PKE2000 - Mounting Kit For Projector User manual

191
Ø49
Ø43
(1-15/16˝)
70 PT-AE2000
Attachement
plate
369– 449
(14-13/32˝–17-9/16˝)
Adjustable in
20 mm (25/32˝) steps
65 (2-9/16˝)
(2-3/4˝)
(1-11/16˝)
(7-1/16˝)
SPEC FILE
ET-PKE2000
Ceiling mount bracket for high ceilings
As of September 2007 < 1 >
Specifications Vertical correction angle: +5°, -20°
Horizontal slant correction angle: ±10°
Horizontal turn correction angle: ±5°
Dimensions(W x H x D): 468 x 418 – 498 x 195 mm
(18-7/16˝ x 16-16/32˝–19-19/32˝ x 7-11/16˝)
Weight: 3.0 kg (6.6 lbs)
Illustration showsthe ET-PKE2000 attached
to the PT-AE2000.
Attachment plate
Ø9.5 (3/8˝)
Ø8.5
(11/32˝)
20 (2-9/16˝)
150 (5-29/32˝)
160 (6-5/16˝)
140 (5-1/2˝)
110 (4-11/32˝)
130 (5-1/8˝)
100 (3-15/16˝)
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . 1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster A . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting A . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting B . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting C . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts(M6 x 12) . . . . 19
Washer-fitted screws(M4 x 10) . . . . . . . . . . . 10
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Weights and dimensions shown are approximate. Specifications subject to change without notice.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Thisceiling mount bracket isto be used when mounting home cinema projectorsto the ceiling.Description
Caution:
• All mounting work must be done by a qualified technician.
•Ensure that the mounting (ceiling) area hassufficient strength.
• Read the enclosed mounting instructionscarefully before starting the mounting procedure.
• When the system isno longer to be used, have a qualified technician promptly remove and dispose of it.
• Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool
should be used.