Panasonic Omnivision PV-C2023 User manual

[3rnnlvlsIon
Panasonic
Combination VCR
Operating Instructions
Model No. PV-C2023/PV-C2033W
-Initial and Connection Procedures 8 and 9. I
I
Setup are on pages i
'_ As an ENERGY STA,q_ Partner,
Matsushita Electric Corporation of America has determined
that this product or product model meets the ENERGY STAt_ _
guidelines for energy efficiency.
Please read these instructionscarefully before attempting to connect,
operate, or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Gufa para r_pida consulta en espa_ol estA incluida.)

SafetyPrecautions/Mesuresde sdcuritd
Warning : TO prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
Caution : To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Avertiasement : Afin de pr_venir tout risque d'incendie ou de chocs dlectriques, ne pas exposer
cet appareil bla pluie ou bune humiditd excessive.
Attention : Pour dviter les chocs dlectriques, intmduire la lame la plus large de la fiche dans
la borne correspondante de la prise et pousser jusqu'au fond.
FCC WARNING : Any unauthorized changes or modifications to this equipment would void the
user's authority to operate.
This video recorder, equipped with the HQ_gh Quality) System, is compatible with existing VHS
equipment. Only use those tapes with the _ mark. It is recommended that only cassette tapes that
have been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used. This television
receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules.
This symbol warns the user that uninsulated voltage within the unit
may have sufficient magnitude to cause electdc shock. Therefore, it
is dangerous to make any kind of contact with any inside part of this
unit.
This symbol alerts the user that important literature concerning the
operation and maintenance of this unit has been included. Therefore,
it should be read carefully in order to avoid any problems.
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal
of these materials may be regulated inyour community due to environmental considerations. For I
disposal or recycling information please contact your local authorities, or the Electronics Industries
A ance: <http:/h,vww.eiae.org.>
Congratulations
On your purchase of one of the most sophisticated
and reliable products on the market today. Used
properly, it will bring you and your family years of
enjoyment. Please fill in the information below. The
serial number is on the tag located on the back of
your unit.
fDate of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
fAccessories
[] Remote Control
_ LSSQ0380
(PV-C2023)
!(_ LSSQ0384
_! (PV-C2033W)
_aD_
[] Batteries 2 "AA"
To order accessories,
call toll free 1-800-332-5368.
Battery replacement caution
• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.
Break off the tab to
prevent recording.
Record
Tab Screwdriver
To record again.
Cover the hole
with cellophane tape,

Playing older or damaged tapes may eventually
cause video heads to become clogged.
Heed Clog Sensor
During playback this
screen appears if clogging
is detected. To remove
screen, press PLAY on the
remote or unit.
•Use "dry" type head
cleaning cassette only=
(Part NO.NV*TCL3OPTis recommended.)
• Follow cleaning tape directions carefully.
Excessive use of head cleaning tape can shorten
the video head life.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control (to reduce picture noise)
Use during Playback and Slow Motion mode to
reduce picture noise. Press the 3 or 6 number key
on the remote control or CH &V on the unit until
the picture clears up. To return to Auto Tracking,
press POWER off, then on again a few seconds
later.
Only use tapes with the _ mark in this unit.
Tape Speed
Setting
SP
Standard
Play)
LP
(Long Play)
SLP
(Super Long
Play)
Type of Video Cassette
T60 T120 T160
2 Hours
1 Hour 2 Hours 40 Minutes
5 Hours
2 Hours 4 Hours 20 Minutes
3 Hours 6 Hours 8 Hours
Display
Picture Tube
VCR
Video Recording
System
Audio Track
Tuner
Broadcast Channels
CABLE Channels
FM Radio
Band Range
General
Power Source Power
Power On
Consumption Power
Off
Television System
Speaker
Operating
Temperature
Operating Humidity
Weight
Dimensions
(WXRXD)
20 inch measured diagonal 90 °
deflection Picture Tube
2 rotary heads helical scanning
system
1 track
VHF2=13, UHF14=69
Midband A through [ (14 -22)
Superband J through W (23 ~
36) Hyperband AA -- EEE (37
-64) Lowband A-5 ~ A-1 (95
-99) Special CABLE channel
5A(0t) UItraband 65 -94, 100
-125
07.5 MHz -108.1 MHz
120 V AC, 60 Hz
Approx. 110W
Approx. 2.5 W
EIA Standard NTSC color
1pieces
5 °C -40 °C (41 °F- 104 °F)
10%-75%
23 Kg (50.6 Ibs.)
515 mra (20-5/16") X 505 mra
(19-7/8") X 474 ram (t8-11/16")
• Designs and specifications are subject to change
without notice.
Unit auto adjusts clock for DST (Daylight Saving
Time.)
• Spring (First Sunday in April)
DST: ON --_ Sets clock ahead one hour.
•Autumn (Last Sunday in October)
DST: OFF --_ Turns clock back one hour.
•If your area does not observe Daylight Saving Time,
select DST: OFF.
• Keep these time changes in mind when
programming the unit for timer recordings.

II[_]LW_'PJ LwJJ L_W_JLIIJL_ LI[_3
Important Safeguards and Precautions ................................................ 2
Safety Precautions/Mesures de sdcurit_ ............................................... 3
Unit Information ....................................................................................... 4
Location of Controls ............................................................................... 6
Connections/Initial Setup (Ready to Play) ............................................ 8
Reset Language, Channels, Clock, Time Zone Adjust ....................... 10
Playback a Tape ..................................................................................... 12
Record On a Tape .................................................................................. 12
Copy Your Tapes (Dubbing) ................................................................. 13
TV Operation .......................................................................................... 14
Picture Adjustment ................................................................................ 15
TV Timer Features ................................................................................. 16
Closed Caption System ........................................................................ 18
FM Radio ................................................................................................ 20
Timer Recording .................................................................................... 22
Tape Operation ...................................................................................... 24
Special VCR Features ........................................................................... 28
V-Chip Control Feature ......................................................................... 29
On-Screen Display (OSD) ..................................................................... 32
Before Requesting Service ................................................................... 33
Limited Warranty ................................................................................... 34
Customer Services Directory ............................................................... 35
Spanish Quick Use Guide/Guia para r_pida consulta ........................ 36
Index ....................................................................................................... 40

EJECT \
Ejects tape. \\ \\
POWER _\
Turns on or off the unit. \
FM/TV
Receives FM radiosignal.
MUTE
Mutes the sound instantly,
CHANNEL UP/DOWN
Selects a channel
SELECT UP/DOWN
Controls navigation around
on-screen menu.
ACTION
DisplaysMain Menu.
NUMBER Keys
Selects a channel directly.
PLAY _
Begins playback.
REWlND/SEARCH_
Rewinds tape, and
searches reverse scene.
PAUSE/SLOW
Pauses and slow motion
and frame advance picture.
CM SKIP/ZERO SEARCH J
In Stop mode, goes to the
counter "0:00:00:' In Play
mode, skips over 1 to 3
minutes of tape.
TAPE POSITION
Finds out present tape
position and amount of tape
remaining.
SPEED
Selects recording speed.
SLEEP
Turnsoffthe unit automatically,
NIGHT
_ Color and picture intensity level are
adjusted during night time use.
_DISPLAY
Displays the VCR status and clock.
RAPIDTUNE
Displays the last channel you were
watching.
VOLUME UP/DOWN
Adjusts volume.
SET/BACK SPACE ,or goes
back to correct.
PROGRAM
Displays SET PROGRAM screen.
You can set Timer Program and
On-Timer.
TRACKING UP/DOWN
picture noise during
Playback and Slow Motion.
Adds or deletes a channel.
Past forwards tape, and searches
forward scene.
_SEARCR
Goes directly to the desired
recording. Locates end point of
recording.
Stops recording or playback.
REC program.
COUNTER RESET
Resets to "0:00:00" at the desired
position.
• When EJECT is pressed, the tape is ejected from Cassette Compartment.
If EJECT is pressed during recording, the unit will not respond to the command.

Built-In Speaker F
AUDIO VIDEO IN Jack |
For dubbing. /
POWER |
See previous page. |
/
VOLUME UP/DOWN --
SET/BACK SPACE
See previous page.
CHANNEL UP/DOWN
TRACKING UP/DOWN
SELECT UP/DOWN
See previous page.
STOP/EJECT
See previous page.
ACTION
Presstogether with REW.
Ic i . ' ii
REWIND/SEARCH
See previous page.
ACTION
Press together with STOP.
PLAY
See previous page.
REPEAT
Repeats a recording,
FAST FORWARD/
SEARCH
See previous page.
REC
See previous page.
TIMER/FM
Sets a timer alarm up 60 min.
Enables FM Radio.
PHONES Jack
Connect an
earphone or
headphones.
PROG TIMER
Indicator
Lights when the
unit is set for
Timer Recording.
ONTIMER
Indicator
Lightswhenthe
On-Timeris set,
REC Indicator
Lights during
recording.
Remote Sensor
--. v- ,-LIRffi
AC Power Plug
When plugged into an AC outlet, the
unit consumes 2.5 W of electric power
in OFF condition.
VHF/UHF Antenna Input Terminal
in from your Antenna or Cable (See
page 8).

Please make all cable or antenna connections before power on.
For ANT./Cable
Connect the cable from Antenna/Cable
to the VHF/UHF terminal on the unit.
UNIT (rear view)
For DSS/Cable Box
Connect the OUT jack on your cable
box to the VHF/UHF terminal on the unit
with a RF cable.
WARNING: ....
Overtightening Nut type RF coaxial cables
may damage acks. F nger t ghten on y.
Press COMBO on the remote for Combo mode.
Plug the unit power cord into AC wail
outlet.
VHF/UHF
UNIT (rear view)
VHF/UHF
IN from
ANTJCABLE
Cable TV
Converter Box
IN from
ANTJCABLE
Press POWER on the remote or unit.The unit comes on and auto channel and
clock set starts.
• if you use a cabIs box, turn
it on and set it to the Public
Broadcasting Service (PBS)
channel in your time 7one.
If you use a DSS receiver, it
must be turned off.
If AUTO CLOCK SET IS INCOMPLETE screen
appears, set the clock using MANUAL CLOCK
SET procedure on next page.
Settings are made automatically. When
setup is done, this screen appears.
•Function buttons are inoperative during Initial
Setup.
• To remove a cassette during Auto Set, press
EJECT twice on the remote or STOP twice on
the unit. in this case, settings must be made
manually. (See page 10.)
• Depending on conditions, Auto Clock Set may
take longer than 30 minutes. If so, press STOP
to stop setup and perform settings manually.
(See page 10.)
•,.itr_L'_I_IIiI_:TtTI]P.o1B_.'ICr.'_P,I_'-rd'_IRm'_I". . • • = i -• •llllt_T=.]t_._-r•Taff_,re_J'."

If AUTO CLOCK SET was incomplete, manually
set the clock as follows.
Press ACTION on the remote to display
SET CLOCK Menu screen
When moving unit to a new location, or if a mistake
was made in the Initial Setup section.
• Make sure atape is not inserted inthe unit.
Press _ • to select the month and
press II_to set. In the same manner,
select and set the date, year, time, and
DST. (Daylight Saving Time)
Press ACTION twice to start CLOCK andexit.
I Turn the unit
I
Power on
rji Press and hold both
PLAY/REPEAT and FF on the
unit for more than 5 seconds.
• The powerwill shut off.
• Please ignore"NO CASSETTE"
warning.
3 Do"lnitialSetup"onpage8,
POWER
ACTION v •
(3_ (30 GOI
(30(30(30
(30(3[3430
m
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN Note to CABLE System Installer
This reminder is provided to call the CABLE
(Cable TV) System installers attention to
Article 820-40 of the NEC that provides
guidelines for proper grounding and, in
particular, specifies that the cable ground
shall be connected to the grounding system
of the building, as close to the point of cable
entry as practical.

1Press ACTION to display
MAIN MENU.
2•Language
1) Press AV,_ • to
select language
icon.
2) Press ACTION
repeatedly.
For Spanish
For French
For English
3) Press k_'_l •
to select "EXIT."
Press ACTION
to exit.
• Channels
1) Press AYI • to
select "CH;'
2) Press ACTION.
3) Press AV to select
"ANTENNA:' then
press • to set your
antenna system
("TV" or "CABLE").
4) Press A,V to select
"AUTO SET," then
press •.
•After Channel Auto Set is
finished, Clock Auto Set
will be performed. (If clock
is set manually, Clock Auto
Set will not be performed.)
• Clock
1) Press AI,V4 • to
select "CLOCK:'
2) Press ACTION.
("TIME ZONE ADJUST" appears
only when auto cleck is set.)
3) Press &y to select
"MANUAl" or "AUTO
CLOCK SET" and
press •.
•For Auto Clock Set, select
"AUTO CLOCK SET,"then
press _..
4) Press kV and
press I • to select and
set the month, date, year,
time, and DST (Daylight
Saving Time).
5) Press ACTION twice to
start the ctock and exit
this mode.

•Time Zone Adjust
(Only when Auto Clock is set.)
1) Press AV4 • to
select "CLOCK."
2) Press ACTION.
3) Press AV to
select TIME ZONE
ADJUST and
press • repeatedly
to select mode.
(See below.)
4) Press ACTION
twice to exit.
POWER
ACTION v •
(3_QD QD!
QE3G9Q_3J
(Z300 (30
SELECT/SET
•:CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
NUMBER Keys
ADD/DLT
ACTION key on
the unit
SI'0P_CT REW/_
On Unit
You can operate the
menu screen using
unit buttons. To display
the menu, press
STOP/EJECT and
REW together with no
tape inserted. To exit
the menu, repeat above
with or without tape
inserted until normal
screen appears.
Using AV•• keys
,,®®
v
On Remote L On Unit
A:CH UP
•:OH DOWN
• : VOLUME UP
•: VOLUME DOWN
Whenever the menu or program
screen is displayed, CHANNEL
UP/DOWN function as •V and
VOLUME UP/DOWN function
as • • only.
7Add or Delete a Channel
To add channel: To delete channel:
Select channel with Select channel with
number keys and CH Ay or number keys
press ADD/DLT. and press ADD/DLT.

_Ready Check List
All connections are made.
DYour unit is pluggedin.
Insert a cassette.• The unit power comes
on automatically.
To prevent tape jam,
remove loose or peeling
labels from tapes.
Press PLAY.
•Playback begins if cassette has no record
tab,
•Forward/Reverse scene search
-* Press FF or REW
-* Press PLAY to release,
•Still (Freeze) picture
-* Press PAUSE/SLOW
-* Press PLAY to release,
•Slow Motion picture
-* Hold down PAUSE/SLOW in
Still mode
-* Press PLAY to release.
•Frame byFrame picture
-* Press PAUSE/SLOW in Sti, mode
-* Press PLAY to release.
•These features work best in SLP mode.
• After the unit is in Still or Slow mode for 3 minutes, it
w_ll switch to Stop mode automatically to protect the
tape and the video head.
•Stop -* Press STOP
Rewind tape -* Press REW in Stop mode
Fast forward tape -* Press FF inStop
mode
•Eject tape "* Press EJECT on the remote
or STOP/EJECT on the unit
You can operate on the unit
CH &•
Insert acassette. PLAY
• Pressto stop and/or REG Indicator
Nect tape.
Insert a cassette with record tab• The unit power comeson automatically.
Press OH •V or number keys to select a
channel.
•For "LINE"input, see bottom ofnext page.
Press SPEED to select
recording speed (see page 4).
SP = Standard Play
LP =Long Play
SLP= Super Long Play
• Selected speed isdisplayed.
Press REC to start recording.
TO edit out unwanted portions, press
PAUSE/SLOW to pause and resume recording.
• You cannot view another channel during
recording.
•Stop -_ Press STOP
• One Touch Recording (OTR)
Press REC repeatedly ,,-_o._Roo--_:_o_:oo,x
to set the recording [._ _ )
length "30min_.- 4hours']. 4:o_-3:oo_-_:oo_-_:_o,v
• The unit stops recording at a presettime.
• PROGTIMER indicator lightson the unit.
•After the unit has been in Rec Pause mode for 5
minutes, it will stop automatically to protect the tape
and the video heed.
• The remaining recording time of an OTR can be
displayed by pressing DISPLAY.
EJECT
ACTION
NUMBER
Keys
nEW
PAUSE/
SLOW
pLAY_
CDG5
QD QD QD
-- DISPLAY
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
TRACKING
ADD/DLT
FF
STOP
RED
SPEED
12

Connections you'll need to make.
Recording (Editing) unit
Playing (Source) VCR
1Insert
pre-recorded
tape.
Insert blank tape
with record tab.
•Dubbing tapes protected with
Copy Guard will have poor
quality results.
2Select "LINE" mode.
See "Selecting Input Mode" below.
PAUSEPress PLAYthen Press REC, then
3_ _ PAUSE at starting Pz¢ PAUSE=_= PAUSE/SLOW
point to put in SLOW immediately to put in
Standby mode. Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
4Press PLAY
to start dubbing. PAUSE
I23
SLOW
Press PAUSE/SLOW
to start dubbing.
5Press STOP
to stop dubbing. STOP Press STOP
to stop dubbing.
•Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Method 1:
Press CH AV. The display will change as follows.
_,LINE_125 or 69_
Method 2:
a Press ACTION for MAIN MENU,
b Press &Y_I •to select "TV;' then press
ACTION for SET UP TV screen.
c Press AV to select "INPUT SELECT;' and then
press •to select "TUNER" or "LINE?
d Press ACTION twice to exit this mode.

Press POWER on the remote or unit.
Use C_ AV
or number
keys toselect
achannel.
[_ Ready Check List
[_ All connections are made.
[9 Yourunit is plugged in.
Press VOL +or
VOL - tOadjust
volume.
Color and picture intensity levels are adjusted so
the screen is easier on your eye_ during night time
use.
Press NIGHT to
set NIGHT mode.
•NIGHT mode may be
selected when watching
TV or #aying a tape.
VOL+/VOL-
CH AV PHONES
Jack
POWER
Press NIGHT to
cancel.
• Previous settings are
restored.
•NIGHT mode _s canceled
when power is turned
off or power failure
Occurs.
MUsing the 100 key
When selecting CABLE channels 100 to 125 with the number keys, first press the 100
key, and then enter the remaining two digits,
•Rapid Tune
Press R-TUNE to display the last channel you were watching.
•Audio Mute
Press MUTE to instantly mute the sound. Press again to restore the previous sound tevet.
•Phones
Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack.
4...... ;_._l_u_l*l_...,L-_, I........ *_::= ..... *|k"tlrl|l[CflllllJlillt;;;_,_;;;;;;;k'Ill]|l::---::::=---

Press ACTION to display MAIN MENU.
POWER
MUTE
CH&V <
ACTION /
100 Key
_dD _l
(33 Q_9Q_3
0Q[3 Q[3
_m B
mlm=q E
-- NIGHT
RAPID
7TUNE
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
VOL
UP/DOWN
NUMBER
Keys
2
3
4
1) Press AV••
to select "TV."
2) Press ACTION
to display SET
UP TV screen.
1) PressAi,V to
select VIDEO
ADJUST.
2) Press •to
display screen
1) Press &_ to
select an
adjustment
item. (See
below left.)
2) Press • • to
adjust.
-- Picture Adjustment--
• COLOR Control
Adjust color intensity.
•TINT Control
Adjust for natural flesh
tones.
• BRIGHTNESS Control
Adjust picture brightness.
•PICTURE Control
Adjust picture intensity by
adjusting both contrast and
color level in the proper
balance.
• SHARPNESS Control
Adjust picture sharpness.
To Reset Picture Controls,
press AV and • to select and set "NORMAL."
All controls return to their factory settings.
Press ACTION three times to exit.

Thisunitcan be settoautomaticallypower on in one of 3
modes (TV, Playback, or FM radio).
You can also combine the On-Timer with a one mince
alarm that gradually increases in volume.
Press PROG to display SET PROGRAM screen,
1) Presa AV" to select "ONTIMER,"
2) Press lb. to display ON
TIMER screen.
3
[_ Ready Check List
[] The clock is settothe correcttime.
1) Press AY to select
desired settings.
2) Press •to set the
ON-TIMER TiME or
ON-TIMER mode.
•Make sure a tape is insetted if Ptaypeck mode )s se}ected.
•See _FM Radio" on pages 20 and 21 lot instructions on how to
preset FM stations.
FsH°2-_°_''''ca_25_l • ON-TIMER mode
cNol PLAY selection order
Fl_9-- Fi_8 .---., Fro1 J
4
TIMEPJFIV
OH _,_1r ON TIMER
indicator
When "ON" is selected, an alarm will gradually increase
in volume for one minute or until canceled by pressing any
button (including VOL +-).
To Make Corrections, use AV and _ • to move back
and correct.
Press PROG to set ON TIMER,
.ON TIMER SET' is displayed.
• ON TIMIERIndicator lights 0,3#)e ur_ll. IRfm J
To Cancel ON-TIMER,
Repeat steps 1 and 2. Then, press ADD/DLT to clear the
time in step 3. New, pleas PROG to end.
"ON TIMER END" briefly appears on-screen.
• If no button on tl_e _emote or unK
(inc/ud_ abu#on used to turn
off the alarm) is pressed within 60
minutes after untl turnsi_elt orb
it wiI_turn itself Pac_( off.
"IR il111_ b_ 111 [lltl [lh_il I li |il|i#lIil'.,|ll rtllJl] iI 111ill I! i |llilillltl b_ ii_lltll iI k_l] i i [llil i i

SLEEP
DISPLAY
_)!_ SELECT/SET
• :CH UP
• :CH DOWN
(3D Q_D(3D • :VOL UP
(3_ Oo (3_ • :VOL DOWN
-- PROG
Q_QD
C_D_ ADD/DLT
_m_ _
_..lliil
O0:OO
I
1:00 (oneminute) ]
I i
2:00
I One-minute
3:00
i increase until 10:00
9:00
I
10:00
I I
15:00
I Five-minute
20:00 increase until 30:00
25:00 i
I
130:00
I
40:00 Ten-minute increase
i I until 60:00
i 50:00
I
.._OO Max)
This unit can be set for auto power off.
Press SLEEP repeatedly
to set SLEEP TIMER.
•Pressing DISPLAY with sleep timer
set displays remaining time.
Press SLEEP repeatedly until
"SLEEP TIMER 00" appears to
cancel.
SLEEPTIMER 30
€
SLEEPTIMER 60
€
SLEEP TIMER 90
€
SLEEP TIMER 90
t _
You can set a timer alarm up to 60 rain. Useful when you
are cooking, etc.
Press TIMER/FM on the unit to display the instant
alarm CANCEL/SETscreen.
2Press CH •• on the unit with CANCEL/SET
screen displayed to set
alarm. (Time changes
in the order shown
]e_.)
• PressingTIMER/FM repeatedly on the unit will
change display as follows.
To cancel, press TIMER/FM then press ADD/DLT on
the remote while CANCEL/SET screen is displayed.
To increase timer in progress, repeat step 2, Time
will be rounded up to next 1, 5, or t 0 minute interval.
(See chart left.)
<Example>
If current time remaining is 12:15, countdown will restart
from 15:00.
• If current time remaining is 9:15, countdown will restart
from 10:00.
• While timer function is in progress, you
can change channels on the unit with
CH AV while "CANCEL/SET" screen is
not dlsplayed.
3Alarm will sound at 0:00. Press any button to stop.
• The volume of the alarm gradually increases for one
minute and then continues to beep until any button is
pressed.

Closed Caption is ...
This multi-use systemnet onlyallowsthe hearingimpairedtoenjoyselectedprograms,butalso makes
useful informationfrom TV stationsavai}ableto everyone.
1
2
3
4
Press ACTION to display MAIN MENU
1) Press &V<III_ to
setect "£'v'."
2) Press ACTION to
display SET UP TV
screen,
1) Press AV to select
"CAPTION}'
2) Press 11_to display
CAPTION screen.
1) Press A_ to select
CAPTION MODE.
2) Press I_ repeatedly
to select mode.
(See left.)
f-_-OFF----_OAPC1--_
fEXTC2 TEXTC1
CAPC2
Closed Caption Mode
Selections
Caption Mode: CAP 01 or 02
A narration of selected
TV programs is displayed.
Check TV program listings for CC
(Closed Caption) broadcasts.
Caption Mode:TEXT 01 or 02
The lower halfof the screen will
be blocked out. When the TV
station broadcasts information,
such as program listings, it will
appear inthis space.
Caption Mode: OFF
Closed Caption /Text narration
will not be displayed.
NOTES :
•The closed caption ortext signal
may be broadcast over Ct, C2_or
both. Also, text contents can vat
so you may wish to try different
settings.
• While record{ng of one station
and watching another is being
done, Captioning will not be
displayed.
Press ACTION three times to
return to the normal screen.
Recording and Playing Back a Closed Caption/Text Program
Record: Record normally.
Closed Caption/Text signal, if present, is recorded automatically.
Playback: Start playback. Do above steps to select desired caption mode. ]
18

O®o
(3_ QD (3D\
Mm_
Mmm w
MUTE
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
ACTION
Closed Captionnarration,if available,is displayedwhen
MUTE button ispressed for silence.
Press ACTION to display MAIN MENU.
21) Press J,V'_ • to select "TV."
2) Press ACTION to
display SET UP TV
screen.
31) Press AV toselect "CAPTION."
2) Press • to display
CAPTION screen.
41) Press _I,V toselect
CAPTION MODE.
2) Press • repeatedly to
select "OFF."
51) Press _1,_ to select CC ON MUTE.
2) Press • repeatedly to
select desired mode.
• Each press of _* willchange
the display as shown left.
• The caption may be broadcast
over CAP C1 or C2.
Press ACTION three times toreturn to the normal screen.
Press MUTE to mute the sound and display
closed captioning.
• To cancel, press MUTE again.

FM Radio is ...
Thisunithasan FMradio withbuiltdnantenna,9 stationpreset,anda bandrangeof 87.5 - 108.1MHz.
Youcan evenset theOn-Timer(page16)to wake uptoyourfavorite radio station.
Id_lr._J J:l_rl_V.4I:'_ _
Press FM/TV on the remote or press
TIMEPJFM twice on the unit to display FM
radio mode.
2
31) Press CH •V
to select the
desired radio
station. (Each
press changes
frequency 200
kHz.)
2) Press
seconds, then
release to quickly
scan for FM
stations in your
area.
•TOcancel,press
OH•or • while
insearchmode.
To Make Corrections,
select station with a number key,
then do step 3again.
To exit FM mode,
press FM/TV on the remote or
TIMER/FM twice on the unit,
Make sure FM tuning is done correctly
(see FM Radio Setup).
Press ACTION
to display MAIN MENU
21)Press&T<• to select "TV."
2) Press ACTION
to display SET
UP TV screen.
31) Press •V to
select FM
ANTENNA.
2) Press •to
select "INT
(INTERNAL)"
or "EXT
• For cabteTV users (EXTERNAL)"
-_ "INT" whichever
• For antenna users sounds the
--_"EXT" best.
Press ACTION twice to end setup.