Pandigital PAN7206 User manual

Pandigital
Digital Photo Frame
User’s Guide

2 
Table of Contents
Important Safety Precautions........................................................ 4

Cleaning the Digital Photo Frame............................................. 4 
Introduction.................................................................................... 5 
What’s In the Box.......................................................................... 5 
Setting Up the Digital Photo Frame .............................................. 6 
Using the Control Buttons and Remote Control............................ 7 
Use the Control Buttons............................................................ 7 
Use the Remote Control........................................................... 7 
Install and Replace the Remote Control Battery ...................... 7 
Using the Digital Photo Frame’s Screens..................................... 8 
The Card Selection Screen....................................................... 8 
The Mode Selection Screen ..................................................... 9 
The Thumbnails Screen.......................................................... 10 
Display a Single Photo on the Full Screen 10 
Rotate a Photo on the Full Screen 11 
Enlarge a Photo on the Full Screen 11 
Starting and Customizing Slideshows......................................... 11 
Play a Slideshow of All Photos............................................... 11 
Play a Slideshow of Selected Photos Only............................. 11 
Play Music with the Slideshow................................................ 12 
Control the Volume................................................................. 12 
Connecting Speakers to the Photo Frame.................................. 12 
Watching a Video........................................................................ 12 
Copying Photos from a Memory Card to Built-in Memory ..........13 
Copy A Single Photo............................................................... 13 
Copy Several Photos.............................................................. 13 
Deleting Photos from the Built-in Memory ..................................14 
Delete the Displayed Photo.................................................... 14 
Delete a Single Photo on the Thumbnails Screen.................. 14 
Delete Several or All Photos in the Built-in Memory...............15 
Setting Viewing Options.............................................................. 15 
Displaying A Clock with a Calendar and a Slideshow ................16 
Set the Internal Clock ............................................................. 17 
Set the Alarm.......................................................................... 17 

3 
Create a Schedule for Playing Slideshows............................. 17

Turn Scheduled Slideshows On or Off................................... 18 
Changing the Decorative Frame............................................. 18 
Copying Files from a Computer or Flash Drive........................... 19 
Connect to a Windows Computer........................................... 19 
Disconnect the Digital Photo Frame from the Computer........ 20 
Connect to a Macintosh.......................................................... 21 
Connect a USB Flash Drive.................................................... 21 
Setup Menu................................................................................. 22 
Frequently Asked Questions....................................................... 23 
Limited Warranty......................................................................... 24 
FCC Statement............................................................................ 25 
FCC Part 15 Information......................................................... 25 

4 
Important Safety Precautions
Always follow these basic safety precautions when using your Digital
Photo Frame. This will reduce the risk of fire, electric shock, and injury.
Warning: Do not expose this product to rain or moisture.
Warning: Do not remove the cover. There are no user-serviceable
parts inside. Refer all servicing to qualified personnel.
•The Digital Photo Frame is for indoor use only.
•Unplug the Digital Photo Frame before performing care and
maintenance.
•Do not block the ventilation holes on the back of the digital photo
frame at any time.
•Keep your Multimedia Digital Photo Frame out of direct sunlight
and heat sources.
•Protect the power cord. Route power cords so that they are not
likely to be walked on or pinched by items placed on or against
them. Pay particular attention to the point where the cord
attaches to the Digital Photo Frame.
•Only use the AC adapter included with the Digital Photo Frame.
Using any other power adapter will void your warranty.
•Unplug the power cord from the outlet when the unit is not in
use.
Cleaning the Digital Photo Frame
Treat the screen gently, it is made of glass and can break. To clean
fingerprints or dust from the LCD screen, we recommend using a soft,
non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
If you use a commercial LCD Cleaning Kit, do not apply the cleaning
liquid directly to the LCD screen. Clean the LCD screen with cleaning
cloth moistened with the liquid.
Clean the outer surface of the Digital Photo Frame (excluding the
screen) with a soft cloth dampened with water.

5 
Introduction
Welcome to the Pandigital Multimedia Photo Frame! Now you can
display your digital photos directly from your memory card, no computer
is necessary. Simply insert a memory card into the Digital Photo Frame,
and turn on the power. You’ll be treated to a slideshow of your photos.
It’s as easy as that. You can also display individual photos, play video
clips, and play background music with your slide show.
The Digital Photo Frame includes these key features:
•Displays digital photos, plays music files and digital videos
without a computer; simply insert a compatible memory card into
the digital frame. Memory card is not included and supported file
types are described below.
•Displays Slideshows of Digital Photos with background music.
•Compatible memory cards include Secure Digital™, MultiMedia
Card™, xD Card, Compact Flash™, Memory Stick™,
MemoryStick Pro™, and Memory Stick Pro Duo™.
•Supported file types: JPEG images (up to 16 Mega Pixels),
Motion JPEG files (AVI), and MP3 music files.
•Control the main functions with buttons on the frame or with the
included infrared remote control.
•Bright TFT active matrix LCD screen.
•USB2.0 high-speed connection to connect to your PC.
•USB2.0 (Host) for connecting to your digital camera.
•Built-In Flash Memory.
To learn more about your new Digital Photo Frame’s features and take
full advantage of them, please take a few minutes to read this Guide.
What’s In the Box
•Digital Photo Frame
•AC Power Adapter
•This User’s Guide
•Remote Control
•USB Cable
•Decorative Frame

6 
Setting Up the Digital Photo Frame
The Digital Photo Frame is easy to set up. Just follow these steps:
1. Plug the AC Power Adapter into the Digital Photo Frame and into a
wall outlet.
2. Insert a memory card into the appropriate slot.
Slot 1 - Compact Flash™
Slot 2 - Secure Digital™ or MultiMedia Card™,
Memory Stick™, MemoryStick Pro™, Memory Stick Duo™, or
Memory Stick Pro Duo™, or xD Memory Card™
Note: The card will only fit in one direction; do not force it. The card
should fit snugly when properly inserted.
3. Slide the POWER button on the left side of the Digital Photo Frame
up, the Digital Photo Frame will power on and automatically start a
slideshow of the photos on the card. Slide the POWER button down
to power off.
4. To display photos individually, press the EXIT button on the remote
control to pause slideshow.
5. Press of Exit button will display thumbnail screen. Use the directional
arrows to choose a photo. Press the Enter on the top of the Digital
Photo Frame, on the remote control. The selected photo is displayed
on the Digital Photo Frame.
Note: Pull the plastic tab sticking out of the remote control. It protects
the battery, and the remote control will not work unless it is
removed.

7 
6. To restart the Slideshow, press the Enter key again, or press the
Slideshow button on the remote control.
Using the Control Buttons and Remote Control
You can use all of the Digital Photo Frame’s features with either the
buttons on top of the frame or using the remote control.
Use the Control Buttons
The control buttons are located on top of the Digital Photo Frame. Their
basic functions are the same no matter when you press them.
Button Action
Move the selection up or left, display the previous photo, or select the
previous file.
ENTER
Select the highlighted option, start a Slide Show, Pause or Play.
Move the selection down or right, display the next photo or select the
next file.
EXIT
Exit the current display, or go back a screen.
SETUP
Open the Onscreen Menu.
Use the Remote Control
The remote control included with your digital photo frame includes all of
the functions on the digital photo frame and some additional ones. The
figure below shows all of the buttons and describes them. The features
described in this guide that use the remote illustrate how to use them.
Install and Replace the Remote Control Battery
1. Hold the Remote Control with the control buttons facing downward.
2. While pressing down on the ridged area of the battery cover, pull the
tray out.
3. Place a “CR2025” Lithium battery on the tray with the positive “+”
end facing toward you.

8 
4. Close the tray.
Using the Digital Photo Frame’s Screens
You access the Digital Photo Frame’s functions with a series of screens,
and control them with either the buttons on the top of the frame or on the
remote control. The first in the series of screens is the Card Selection
screen.
The Card Selection Screen
Use the Card Selection menu to choose between memory cards and the
built-in memory.
1. To display the Card Selection screen, simply press the Exit
button on the remote control to back through screens until it
opens.

9 
2. Press the Left and Right arrows to select the desired memory
card, or built-in memory.
3. Press Enter to make the selection. The Mode Selection Screen
opens.
The Mode Selection Screen
The Mode Selection Screen shows after you choose the memory source.
Use it to choose the type of files or application you wish to display or
open.

10 
Photo Open the Thumbnails Screen to display still photos
and jpeg slideshows.
Music Play MP3 music files.
Video Play Video files.
File View all of the files on the memory source.
Clock Show the current date and time, use alarm and schedule On/Off functions.
1. Press the Left and Right arrows on the Remote Control or the
Digital Photo Frame to select Photo, Music, Video, File, or Clock;
press ENTER to make the selection. If you select Photo, the
Thumbnails Screen will open. It is described below.
2. If you select Music, a screen opens and lists all of the music
files. If you select Videos, a screen opens and lists all the video
files. You can select one in the same manner as a photo. If you
select Clock, the Calendar and Clock are displayed; this screen
is described later in this manual.
3. To go back to the Mode Selection Screen, press Exit.
The Thumbnails Screen
This screen gives you thumbnail view of all photos on the selected
memory source. Use this screen to select a single photo to display,
multiple or all photos to do slideshow, and copy photos from external
memory to build-in memory.
Display a Single Photo on the Full Screen
You can choose a single photo to display on the full screen, without a
Slideshow:
1. From the Select Mode screen, choose Photo. The Thumbnails
Screen opens.
2. Use the Arrow buttons on the Remote Control or the Digital Photo
Frame until the desired photo is highlighted. The photo’s filename
and size are displayed at the top of the screen. The other number
indicates how many screens of photos are in the memory, and which
one is displayed.
3. Press ENTER to display the selected photo on the full screen.

11 
4. Press the Left Arrow to return to the previous photo.
5. Press the Right Arrow to display the next photo.
6. To stop the display and return to the Thumbnail screen, press the
EXIT button.
Rotate a Photo on the Full Screen
You can rotate a displayed photo on the full-screen by pressing ROTATE
on Remote Control. The full screen photo will be rotated by 90 degrees
counterclockwise in each press of the ROTATE button.
Enlarge a Photo on the Full Screen
You can magnify a displayed photo on the full screen by pressing ZOOM
button on Remote Control. The photo is magnified in size each time you
press the ZOOM button, until it returns to the normal size. While the
photo is in enlarged, use the Arrow buttons to move the photo so you
can see the portions that aren’t currently visible.
Starting and Customizing Slideshows
The Digital Photo Frame can include all of the photos on the selected
memory source in the slideshow, or you can select specific photos for
the slideshow. You can also add music to your slideshow.
Play a Slideshow of All Photos
With the Thumbnails Screen displayed, press the SLIDESHOW button
on the Remote Control or the ENTER button on the frame twice, the
slideshow of all photos in the selected memory will begin.
To stop the Slideshow and return to the Thumbnails screen, press the
EXIT button.
Play a Slideshow of Selected Photos Only
Note: You need your remote control to create a custom slideshow.
1. With the Thumbnails Screen displayed, use the arrow buttons to
highlight a photo.
2. Press “+” key to select the photo or “-” key to de-select it (these
functional buttons only exit on your remote). A check mark is
displayed at the upper-right corner of the selected photo.

12 
3. Continue selecting or de-selecting photos in the same manner.
4. When all desired photos are selected, press SETUP on the Remote
Control or on the frame to open a setup menu.
5. Choose Start Slideshow and press ENTER.
6. Choose Selected option from the menu to start your custom
slideshow.
Play Music with the Slideshow
To play background music with a slideshow, copy MP3 files onto the
same memory card as your photos. The music will play as the slideshow
runs. See Copying Files from a Computer section for details on copying
files. You can also choose a music file to play without a slideshow. Just
select it from the Music screen.
Note: Music files must be standard MP3 format and not from licensed
music download services.
To stop the music and return to the Music screen, press the EXIT button.
Control the Volume
Use the Remote Control to adjust the volume on the Digital Photo Frame
or when playing MP3 files.
Press the “-” and “+” buttons to adjust the volume down and up.
Connecting Speakers to the Photo Frame
The Digital Photo Frame has built-in speakers, but you can also connect
external speakers and an external amplifier. Plug the speaker plug into
the earphone jack located on the right side of Digital Photo Frame (Cable
not included).
Watching a Video
You can watch video files on your Digital Photo Frame as well. It
supports the Motion JPEG (AVI) video formats used by most digital
cameras.
To watch a video, there need to be video files on the memory card.
1. Insert a memory card with video files on it. The Card Selection

13 
Screen opens. Choose the desired card.
2. Press Enter. The Mode Selection screen opens.
3. Use the Arrow keys to choose Video and press Enter. A screen
listing all of the video files opens.
4. Use the Arrow buttons to choose the desired file and press Enter.
The Digital Photo Frame plays the video.
5. Adjust the volume by using VOL+/VOL– buttons on the Remote
Control.
6. To play another video file, press Exit to return to the video file listing,
select another video file and press Enter.
Copying Photos from a Memory Card to Built-in
Memory
The Digital Photo Frame can store photos in its built-in memory. You can
copy photos one at a time, or in batches.
Copy A Single Photo
Use the Remote Control to copy a photo from a memory card to the built-
in memory.
1. Press the EXIT button until the Select Card screen opens.
2. Use the Arrow buttons to highlight the desired memory card.
3. Press the ENTER button to select the card. The Mode Selection
screen opens.
4. Select Photo and press ENTER. The Thumbnails screen opens.
5. Use the Arrow Buttons to highlight the photo you want to copy.
6. Press the SETUP button. The on-screen setup menu opens on the
Digital Photo Frame.
7. Press the Up or Down arrow to select Copy File and press ENTER.
8. Choose One option and press ENTER to copy the selected photo.
9. Press EXIT to return to the Thumbnails screen.
Copy Several Photos
Use the Remote Control to copy more than one photo from a memory

14 
card to the built-in memory.
1. Press the EXIT button until the Select Card screen opens.
2. Use the Arrow buttons to highlight the desired memory card.
3. Press the ENTER button to select the card. The Mode Selection
screen opens.
4. Select Photo and press ENTER. The Thumbnails screen opens.
5. Use the Arrow Buttons to highlight the photo you want to copy.
6. Press EXIT to return to the Thumbnails screen.
7. Use the “+” button to select the photo. A check mark should appear
at the upper-right corner of the thumbnail photo. Use the - button to
de-select it if you want to.
8. After completing the photo selection, press the SETUP button to
open the on-screen setup menu.
9. Press the Up or Down arrow to select Copy File and press ENTER.
10. Choose Selected option and press ENTER to copy the selected
photos.
Deleting Photos from the Built-in Memory
You can delete photos from built-in memory, but not from memory cards
using the remote control.
Delete the Displayed Photo
1. With the photo displayed on the screen, press the SETUP button.
2. Press the Up or Down arrow to select Delete File.
3. Press ENTER to delete the displayed photo.
4. Press EXIT to close the menu.
Note: It is a good idea to keep backup copies of the photos you copy
onto your Digital Photo Frame.
Delete a Single Photo on the Thumbnails Screen
1. With the Thumbnails Screen displayed, use Arrow buttons to select a
photo to a delete.
2. Press the SETUP button.

15 
3. Press the Up or Down arrow to choose Delete File and press
ENTER.
4. Choose delete selected option to delete the highlighted photo.
Caution: You will not be asked to confirm or have a chance to change
your mind. It is a good idea to keep copies of the photos you
copy onto your Digital Photo Frame.
Delete Several or All Photos in the Built-in Memory
You can use the Remote Control to delete several or all photos from the
internal memory.
1. With the Thumbnail screen displayed, press the Arrow Buttons on
the Remote Control or the Digital Photo Frame until the desired
photo is highlighted. The photo’s filename is displayed at the top of
the screen. The notations at the top of the screen also indicate how
many screens of photos are on the memory card.
2. Press the “+” button or “–“ button on the Remote Control to select or
unselect the highlighted photo. Selected photos will have a check in
the thumbnail photo window.
3. Press the SETUP button. A setup menu opens.
4. Press the Up or Down arrow to choose Delete File and press
ENTER. Three submenu options will be provided: Delete, Selected
or Delete All. Choose Delete Selected to delete the marked photos.
Caution: You will not be asked to confirm or have a chance to change
your mind. It is a good idea to keep copies of the photos you copy onto
your Digital Photo Frame.
5. Press EXIT to close the menu.
Setting Viewing Options
You can control all of the viewing options in the Setup Menu using the
buttons on the top of the frame or remote control. You can display the
on-screen Setup Menu at any time by pressing the Setup button. Only
available setup options will be displayed for each screen.
1. With the Select Card or Select Mode screen opens, press Setup to
open the Setup Menu.
2. With the Setup menu open, use the Up and Down arrows to choose
a display option.

16 
3. Press ENTER to select the option. A second menu opens, listing the
available settings. A blue highlight shows the current setting.
4. Use the Up and Down arrows to choose the desired setting.
5. Press ENTER to select the setting. The second menu closes.
6. You can make as many changes as you wish in the same manner.
When you are finished, press the EXIT button to close the Setup
Menu and return to the previous screen.
Displaying A Clock with a Calendar and a
Slideshow
You can use your Digital Photo Frame as a desk calendar with a real-
time clock and continuous slideshow. You can also use the Digital Photo
Frame as an Alarm Clock, after setting internal clock.
To Display the Calendar/Clock screen:
1. Open the Mode Selection Screen.
2. Use the arrow buttons to choose Clock and press ENTER. The
Calendar/Clock screen will look similar to the one shown below. The
slideshow displays photos from the currently selected memory
source, and if the alarm is set, on alarm icon appears under the
slideshow window.

17 
Set the Internal Clock
When the Digital Photo Frame’s internal clock is set, you can use it as an
alarm clock.
1. To set the internal clock, choose CLOCK from the Mode Selection
screen and press SETUP to open the Setup Menu.
2. Choose Set Clock.
3. Use the RIGHT or LEFT arrow to move to a time or date field to be
changed.
4. Use the Up and Down arrows to change the value in the selected
field.
5. When the date and time are correct, press the ENTER button to set
the time and return to the normal Clock/Calendar View screen.
Set the Alarm
Use your Digital Photo Frame as an alarm clock. You can set it to alarm
with a built-in tone or playing a pre-stored MP3 music in the build-in
memory. You can also set the alarm to alert only once or daily after
setup.
1. To set the alarm clock, open the Setup Menu.
2. Choose Set Alarm.
3. Use the Left and Right arrows to move the through the selection
fields and the Up and Down arrows to scroll through the values (time,
alarm type or alarm tone/music etc).
4. When the alarm settings are correct, press the EXIT button to return
to the Clock/Alarm Setting menu.
Create a Schedule for Playing Slideshows
You can set your digital photo frame to display slideshows at
predetermined times.
1. With the Calendar and Clock displayed, press the Setup button.
2. Use the Arrow buttons to select Set On/Off Schedule and press
Enter. The Set Schedule page opens with the Hours field for the
Weekdays Turn on at highlighted.
3. Use the Up or Down arrow to set the hour you want scheduled
slideshows to start, then use the right arrow to move to the minutes

18 
field, set the minutes in the same manner as the hours, and then
move the highlight to the AM/PM field.
4. Use the Up or Down arrow button to choose AM or PM.
5. Set the time you want the slideshow to end in the same manner.
6. Press the Enter button when Always OFF is highlighted if you don’t
want to play scheduled slideshows on weekdays. The field now
reads Set Turn-On Time. Press the Enter button to schedule
weekday slideshows.
7. You can set different times for scheduled slideshows on the
weekends in the same manner.
8. When you are happy with the settings, press the Exit button to save
them and return to the Calendar/Clock page.
Turn Scheduled Slideshows On or Off
After you set create slideshow schedules, you need to turn slideshow
scheduling on to use the schedules.
1. With the Calendar/Clock displayed, press the Setup button.
2. Choose Start Scheduled ON/OFF, to turn the scheduling on or off.
After the scheduled control is turned on, any user operations, e.g.
pressing remote keys, or insertion/removal of memory cards, will cancel
the scheduled control immediately. Scheduled slideshow can also be
turned on during the slideshow by pressing Setup, select Start
Scheduled ON/OFF menu item and press Enter key.
Changing the Decorative Frame
Depending on the model, your Digital Photo Frame may come with
interchangeable decorative frames.
1. To change the frame, remove two screws on the back of the frame
and lift the unit from the frame.
2. Place the unit into the new frame, replace the screws, and finger-
tighten.

19 
Copying Files from a Computer or Flash Drive
You can connect the Digital Photo Frame to a Windows or Macintosh
computer to copy files to the built-in memory. You can also connect a
USB flash drive to the frame to copy files.
Connect to a Windows Computer
To copy files from between your computer and the Digital Photo Frame
do the following:
1. Plug in and turn on the Digital Photo Frame.
2. Connect the small end of the USB cable to the Mini USB port on the
Digital Photo Frame.
3. Connect the Larger end of the USB cable to a USB port on your
computer.
4. Open My Computer on your Desktop. A window showing all drives
connected to your computer opens. (It will look similar to the screen
shown below.)
5. Each memory card inserted in the Photo Frame and the built-in
memory is associated with one disk drive on your computer.
6. Double-click the desired drive to display the files on the card. The
example below shows a card with several JPG images on it.

20 
7. To copy files from the memory card, select them and drag them to
the desired location on your computer.
8. To copy photos from your computer to the built-in memory, first
locate the files on your computer, second, select the files you wish to
copy, choose File, Copy, and then move your cursor back to the disk
drive in the open window for the built-in memory.
Note: Most cameras and graphic programs store photos in the
Windows My Pictures folder. If you didn’t move them somewhere
else, they are probably there.
9. Click in the window, and choose File Paste.
10. Similarly, to copy photos from your computer to the memory card,
you copy and paste to the disk drive corresponding to the memory
card.
Note: If your PC is connected to Local Area Network drives, or
if you have multiple drive letters already assigned to peripheral
devices, you will need to manage your drive settings in Windows
to free up the four drive letters immediately following your CD-
ROM drive so the Digital Photo Frame can assign them to
memory card slots properly.
Disconnect the Digital Photo Frame from the Computer
It is important not to just unplug or switch off the Digital Photo Frame
when files are being transferred from the memory card or computer to