Pandigital DPF56-2 User manual

Pandigital Quick Start Guide
Initial Setup
View Slideshow from your Memory Source
Access HOME Screen
1
Remove the plastic insert
before using the Remote
Control.
Plug the power adapter
into a wall outlet and DPF. Extend the stand on the back of the frame to the
desired viewing angle.
Power ON the DPF
(switch is on the side
of DPF).
A slideshow will begin
displaying the photos
stored in the DPF’s
internal memory.
Insert your memory
card or USB Flash Drive
into the appropriate
media slot on the side
of the DPF.
A slideshow will begin
displaying the photos
stored on your memory
source.
To select a different memory
source, press EXIT until the
HOME screen is displayed,
and then press SETUP.
Power ON the DPF. The slideshow will
automatically begin
displaying the photos
stored on the selected
memory source.
Press the EXIT button
on the remote control
or DPF top-back panel
until the HOME screen
is displayed.
2 3 4 5
12 3 4
1 2 3
CUSTOMER SUPPORT
Updated documentation is available on our website: http://www.pandigital.net
Call us toll free: 1-800-715-5354
Use arrows to highlight
Select Media, and then
press ENTER.
5
Use arrows to highlight
the desired memory source,
(i.e., Internal Memory), and
then press ENTER.
Note: Sources not present
in DPF will not be available
for selection.

Pandigital Quick Start Guide
Copy Images from Memory Card into Internal Memory
Power OFF the DPF. Insert your memory card
into the appropriate media
slot on the side of the DPF.
Power ON the DPF. Press EXIT until the
HOME screen is
displayed.
Use arrows to highlight
PHOTOS, and then
press ENTER. The photo
thumbnails screen is
displayed.
Press SETUP; use the
arrows to highlight
Copy Photo, and then
press ENTER.
Use arrows to highlight
ALL, press ENTER, and
then select Yes to confirm
the copy request.
Press EXIT to return
to the HOME screen.
123 4
5 6 7 8
Copy Images from Computer into Internal Memory
Power ON the DPF. Connect the USB cable
to the DPF (small end)
and your PC (large end).
When the PC recognizes
the DPF, a pop-up
window opens; select
‘Open folder to view
files’ and click OK.
Locate the folder
containing your photo
files you want to copy
into the DPF.
Select, then drag and
drop the file(s) into the
‘PANDIGITAL’ drive.
Click the ‘Safely remove
USB Mass Storage device’
message associated
with the ‘Pandigital’ drive.
1 2 3 4 5
678
A window opens with all
drives connected to your
PC listed. Locate the
drive titled ‘PANDIGITAL’.
To safely disconnect the
USB cable, click the
hardware removal icon
in your task bar.
Example
Example
Safely Remove Hardware
9
When prompted,
disconnect the USB
cable from the DPF
and PC.
Safely Remove USB Mass
Storage Device - Drive (F:)
Example
Example
PanQSG_1108