Pandora Light Pro User manual

Pandora would like to thank you for choosing
our LIGHT PRO service and security system

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
Pandora is the exclusive brand of security systems fully developed and
manufactured in Russia.The manufacturing has its owen R&D department and more
than 10 years of experience in the development of car-alarms making it able to offer
the latest technology with unique features. In 2016, Pandora and TSS Group, have
formed a new strategic partnership and thanks to long experience in the car security
market, the selected functions and features have been optimized according to needs
of EU and european customers.
Pandora LIGHT PRO – is a premium car service-security system, built for cars with
on-board voltage of 12V. It is a complex engineering solution which includes car
security system, telemetry, remote and automatic engine start and various service
options, all controlled from your OEM key remote, smartphone or online service.
When building Pandora LIGHT PRO we were using the most up-to-date
electronics from world’s best manufacturers. The device is built using high-precision
mounting and control machinery, thus we guarantee highest possible quality,
reliability and stable technical characteristics for the whole operation period.
Pandora LIGHT PRO has a cryptographically strong authorization code with
unique dialog algorithm and individual 128 bit encryption key on every device. We
guarantee 100% protection form electronic hacking for the whole operation period.
GENERAL INFORMATION
WARNING! It is strongly advised to have professional car mechanic installing the system. Any car electronics installer should be able to
install Pandora LIGHT PRO using installation scheme in this manual and
AlarmStudio software. Most features are highly dependent on competent
installation. Our systems are thoroughly tested for quality, so if a feature fails
to produce expected result, most likely the problem is in improper installation.

USER MANUAL
IMPORTANT! Note that this manual describes remote and manual functions
for the most part. Functionality of the system is vast and would require a
book-sized manual to fully describe. Instead we use handy software named
AlarmStudio that functions as both programming tool and an extended
installation & functionality manual. It requires Windows.
This device has limited external factors resistance. It should not be subjected to
water beyond occasional splatter, or operated in temperatures outside -40° to +80° C
range.
Our web site: www.pandorainfo.eu
Product is in conformity with Electromagnetic Compatibility
Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC
GENERAL INFORMATION

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
General information 2
System features 7
System set 9
Remote controls 10
Led indicator signals 11
Quick access functions of the main control remote 12
Icons of the remote control 14
Arming procedure 15
Disarming procedure 16
Emergency disarming 17
Enabling/Disabling an immobilizer radio tag 19
Unlocking the trunk lock 20
Locking/Unlocking doors when ignition
is being switched on 21
Car search function 22
Delayed arming 22
PANIC mode 23
Remote and automatic engine start 23
Programmed neutral procedure
(for cars with manual transmission) 24
Remote engine start 25
System settings menu 27
Engine preheater 29
Timer channels control 29
Car status control 31
Event history 31
Automatic engine start settings 32
T A B L E O F C O N T E N T S

USER MANUAL
T A B L E O F C O N T E N T S
Sensors settings 35
Shock sensor settings 35
Motion sensor settings 37
Tilt sensor settings 37
Wiring diagram 38
Wiring description 41
Siren signal settings 45
Sound notification settings 46
Radio channel control settings 46
Maintenance mode 47
Time settings 48
Alarm settings 49
Replacing a battery in the remote control 49
Immobilizer 50
Arming/Disarming using a radio tag button 50
Arming/Disarming in Hands Free mode 51
Arming/Disarming in «Slave» mode 51
Immobilizer mode 51
Anti-hi-jack mode 52
Code immobilizer using original car controls 52
Replacing immobilizer tag battery 53

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
TABLE OF CONTENTS
Pandora BT mobile application 54
System configuration and programming 55
Entering the programming menu 55
Preparing to program the system using a computer 57
Updating firmware 57
Programming using VALET button 58
Additional devices 69
Siren sounds and turn light signals 70
Meaning of LED indicator colors 71
Checking the number of recorded remote controls/
radio tags/mobile device 71

USER MANUAL
SYSTEM FETURES
SYSTEM FETURES
2-way LCD remote control
• Arminganddisarmingsecuritysystemusingseparatebuttons.
• Statusesof14independentsecurityzones
• Vibratingalert.
• 16notificationsringtones.
• OLED-display.
• Vibrationconfirmationofthebuttonpress.
• Batterylevelindicator.
• Currenttimeindication.
• Timesynchronizeswiththebaseunitforexacttimestampintheeventhistory.
• Engine*andinteriortemperature,voltageandfuellevelindication.
• Promptremoteaccesstothesettingsofshock/tilt/motionsensor.
• Vieweventhistorywithtimeandeventstamps.
• AutomaticcontrolofRFcoveragezone.
Immobilizer tag
• Dialogcodingofcontrolcommands.
• Individual128-bitencryptionkey.
• Built-inLEDindicator.
• Built-inbuttontocontroloversecuritymodes.
• Built-inintegralaccelerometer.
* Engine temperature
indication is available
only if temperature
sensor is connected.
The sensor
availability depends
on the system set.

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
Base unit
• Individual «Secret PIN-code» for disarming and disabling immobilizer.
• Dialog coding of control commands sent at a frequency of 868 MHz.
• Individual 128-bit encryption key. A user can change the key during tag re-learning
procedure.
• Event history with exact time stamps is stored in the base unit and is transferred to
the remote when it is in range
• Can be complemented with BM-105 single-wire digital block relay and BTR-101
radio relay.
• Monitoring of on-board voltage.
• Built-in integral accelerometer for determining motion and shocks with adaptive
processing algorithm and sensitivity controls via the remote control.
• Built-in 2.4 GHz module supports Bluetooth 4.2 Low Energy.
• Hands Free mode for arming/disarming.
• Immobilizer and Anti-hijack modes.
• Separate inputs for hood and trunk sensors.
• Advanced processing of sensor data, eliminating false alarm possibilities.
• Precisionmeasurementofinteriorandengine*temperature,displayedonthe
remote.
• Two-step unlocking of the doors.
• Arming when the engine is running.
• Automatic arming.
• Delay for interior lighting when arming.
• Software updates via built-in micro-USB socket.
SYSTEM FETURES

USER MANUAL
Car security zones
Pandora LIGHT PRO service-security system guards following independent zones with
corresponding zone notifications on the remote and recording alarms into the event
history:
• cardoorsperimeter(separateforeverydoor*);
• fronthoodtriggers;
• trunktriggers;
• ignitiontrigger;
• brakepedalpressing;
• triggeringoftheshocksensor(warninglevel)**;
• triggeringoftheshocksensor(alarmlevel);
• triggeringofthemotionsensor;
• triggeringofthetiltsensor;
• criticallylowon-boardvoltage  
• triggeringoftheoriginalalarmsystem*.
All alarm events are recorded into system’s non-volatile memory with coordinates,
date and exact time the event happened. Event history can be read using a remote
control.
SYSTEM SET
1. Base unit 1
2. Main control remote with LCD 1
3. Leather case for main remote control 1
4. Immobilizer tag 1
5. Cable with three-colored light indicator 1
6. User manual 1
SYSTEM FETURES
* Availability of this
function depends on
car make and model
** Triggering of the
warning level of
shock sensor is not
saved in the event
history

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
WARNING! All control commands are transmitted via radio channel, for maximum eectiveness and range it is recommended not to shield
aerial area (see picture) with ngers when using a remote control
7. Personal owner’s card 1
8. Engine temperature sensor 1
9. Main cable 1
10. LIN interface cable 1
11. IMMO interface cable 1
12. Relay 1
13. Fastening kit 1
14. Micro-USB cable 1
15. Packaging 1
Manufacturer reserves the right to change set and construction of the product to improve
its technological and operational parameters without notification.
REMOTE CONTROLS
Two-way remote is the main mean of control over the system.
For easily distinguishable notifications the remote uses 16 ringtones. Each ringtone
matches particular event. Remote has flashing LED indicators for additional
information.
The remote is fully operational when shipped. To switch the remote on, press and
hold button. «REMOTE ON» ringtone will play. Pressing and holding this button
again for 3 seconds will cause the remote to switch off.
REMOTE CONTROL

USER MANUAL
REMOTE CONTROL
WARNING! A remote control is a unied control device. Its functions
depend on security system model.
LED INDICATOR SIGNALS
Green indicator:
• Flashesifthereisaconnectionwiththebaseunit
• Goesdarkwhenthereisnoconnectionwiththebaseunit.
Red indicator:
• Flashesfrequentlyifthereisanynotification
• Flashesoccasionallywhenthereisnoconnection.
Aerial
SEND/ALARM
indicator
OLED-
display
Button 1
Button 2
Button 3
12
12 0B
48

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
System is disarmed System is armed
(no alarm events)
Ignition is switched on Ignition is switched o
(short press)
Lock doors without
arming
Arming with sound
confrmation
Search mode – flashes
of turn signals with
sound signals for 5
seconds
(1 sec.)
Arming without sound
confrmation
Search mode – flashes
of turn signals without
sound signals for 5
seconds
(2 sec.)
Switch on «Ignition
maintenance» mode
(3 sec.)
Switch on «Programmed
neutral» Remote engine start
(short press) Unlock doors Unlock doors Disarming with sound
conrmation
(1 sec.) Unlock doors Disarming without
sound conrmation
(> 2 sec)
Switch o «Ignition
maintenance» mode
Switch o the ignition
during remote or
automatic engine start
procedure.
QUICK ACCESS FUNCTIONS OF THE REMOTE CONTROL
REMOTE CONTROL

USER MANUAL
(short press) Switch on LCD lighting (available only on the remote with LCD)
(1 sec.) Unlock trunk (CH1)
(2 sec.) Switch on/o timer channel (CH2)
(3 sec.) Switch on/o remote (available only on the remote with LCD)
+
(short press) PANIC mode
+
(short press)
Arming when the
engine is running with
sound conrmation
Arming in 30 seconds
With sound notication
+
(1 sec.)
Arming when the
engine is running with
sound conrmation
Arming in 30 seconds
without sound
notifcation
REMOTE CONTROL

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
ICONS OF THE REMOTE CONTROL
REMOTE CONTROL
Flashing when
command sending
Security mode
status
Remote control
battery level
Numeric indicator
displays current
time
Battery voltage
Interior
temperature
Engine
temperature*
Fuellevel*
12 48
12°
0°
0
Alarm clock
Shock sensor
security zone
Warning level of
thesensor;
Alarm level
of the sensor
Tilt sensor
Security zone
Motion sensor
security zone
Doors security
zone
Front hood
security zone
Trunk
Security zone
Ignition
Security zone
12.0V

USER MANUAL
REMOTE CONTROL
Handbrake/ neutral
indicator, Brake
pedal security zone
Low voltage
security zone
P
ARMING PROCEDURE
Arming the system allows monitoring of all security zones, locks the doors and blocks
the engine.
To arm the system when the engine is stopped, shortly press button on the
remote control. The siren will emit one sound signal and turn signals will flash once.
The remote control will play «ARMING» ringtone and security mode status icon (the
lock) will change to
~~
short press doors locking
system arming 1 ash
1 ash
1x
press
and hold
for 1 sec.
* Separate display indication of doors, original alarm status, fuel level depend on information
in CAN-bus digital protocol of specific car
For arming without sound confirmation press for more than 1 second.
Engine operation
icon
Engine is stopped
STOP

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
REMOTE CONTROL
If when arming doors, hood or trunk were open, the siren will sound 4 short signals
instead of 1, turn signals will flash 4 times, remote will play «WARNING!» ringtone
(after «ARMING» ringtone) and will show troubled zone. This zone sensor will be
disabled at that moment. Sensor will be armed again in 15 seconds after the zone was
set right.
For emergency arming when ignition is switched off, press and hold VALET button
for 3 seconds until the system confirms with red LED indicator flash. A car will be
armed in 30 seconds.
DISARMING PROCEDURE
To disarm the system, shortly press button on the remote control. You will
hear 2 short siren sounds and will see 2 flashes of turn signals. The remote will play
«DISARMING» ringtone and security mode status icon will change to:
~~
short
press
press
and hold
for 1 sec.
doors unlocking
system disarming 2 ashes
2 ashes
2x
2 ashes
For disarming without sound confirmation press button for more than 1
second.
If there were new alarming events during the time system was armed, siren will
sound 4 times and turn signals will flash 4 times, the remote control will sound
«WARNING!» ringtone (after «DISARMING» ringtone) and will indicate zones
triggered. All recent alarm events can be viewed in the event history.

USER MANUAL
REMOTE CONTROL
CONTROL OVER THE SYSTEM IN A CASE OF EMERGENCY
2-2-2-2
PIN
In case you cannot disarm the system
using the remote control or radio tag, the
«Secret PIN-code» located on the owner’s
plastic card can be used. You can enter
the code only if the base unit is powered,
the ignition is switched off. The PIN-code
entering is performed using external or
located on the base unit VALET button
and indicated by flashes of the external
or located on the base unit LED indicator.
The «Secret PIN-code» input is
performed using VALET button.
1. Enter the first digit of the code using
VALET button. Press the button a
number of times, equals to the first
digit. Pauses between presses should
not exceed 1 second. Each pressing
WARNING! Make sure that a protective layer on the owner’s plastic card is intact after the system installation.
WARNING! Carefully remove the protective layer, do not use sharp objects to avoid damaging of hidden information under the protective layer.
Three-color status LED
indicator (green, red, orange)
Button
VALET BUTTON

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
will be confirmed with orange LED indicator flash. Pause for more than 1 second
and red LED indicator flash confirm the input of the first digit. Then you can enter
the next digit.
2. Enter the second digit of the code using VALET button. Press the button a number
of times, equals to the second digit. Pauses between presses should not exceed 1
second. Each pressing will be confirmed with orange LED indicator flash. Pause for
more than 1 second and red LED indicator flash confirm the input of the second
digit. Then you can enter the next digit.
3. Enter the third digit of the code using VALET button. Press the button a number
of times, equals to the third digit. Pauses between presses should not exceed 1
second. Each pressing will be confirmed with orange LED indicator flash. Pause for
more than 1 second and red LED indicator flash confirm the input of the third digit.
Then you can enter the next digit
4. Enter the fourth digit of the code using VALET button. Press the button a number
of times, equals to the fourth digit. Pauses between presses should not exceed
1 second. Each pressing will be confirmed with orange LED indicator flash. After
correct enter of the fourth digit the system will enter programming mode. The
correct input will be confirmed with the series of green and red flashes of the
LED indicator. If the input was incorrect, it will be indicated with a long red flash
of the LED indicator and the system will stay in previous state. New input can be
attempted after 5 seconds.
After correct input of PIN-code the system will enter programming mode if it was
disarmed and the ignition was switched off.
For emergency arming when the engine is stopped, press and hold VALET button for
3 seconds. The system will be armed in 30 seconds.
REMOTE CONTROL

USER MANUAL
REMOTE CONTROL
ENABLING/DISABLING AN IMMOBILIZER RADIO TAG
Write down or remember the «Service PIN-code»
To enable/disable a radio tag, enter level 15 (the system should be in programming
mode). Enter the «Secret PIN-code» to disable radio tag or press VALET button once
to enable radio tag.
Enter the «Service PIN-code» to enter the programming mode (factory preset of
the «Service PIN-code» is «1-1-1-1»). You can enter the code only if the base unit is
powered, the ignition is switched off, the system is disarmed and the maintenance
mode is switched off. If there is no «Service PIN-code», you can enter programming
mode using the «Secret PIN-code» written on the owner’s card. After entering
programming mode, press VALET button 15 times. Green color of LED indicator
means a radio tag is switched on, red color means a radio tag is switched off.
Disabling a radio tag:
LED indicator will light green after entering the programming level. The system will
wait for entering the «Secret PIN-code». Enter the «Secret PIN-code» that is written on
the owner’s plastic card. The system will confirm disabling of the radio tag with two
sound signals of the siren and a long red LED flash. After that the system will return to
the programming menu. If the PIN-code is not entered within 10 seconds or the input
is incorrect, a siren will sound one signal, LED will produce the series of red and green
flashes and the system will return to the programming menu.
WARNING! It is highly recommended to change factory preset of the «Service PIN-code» for improving security of the system.

PANDORA LIGHT PRO SERVICESECURITY SYSTEM
REMOTE CONTROL
UNLOCKING THE TRUNK
To independently unlock the trunk, no matter if the system is armed or not, press
button and hold it for 1 second.
If the system is armed when this action is performed, the trunk will be disarmed,
shock and supplementary sensors will be disabled. All the other security zones will
remain armed
If the trunk was not opened in 15 seconds after using «unlock trunk» command,
the system will lock it again, enable sensors and arm trunk security zone. This will be
indicated with 1 flash of turn signals.
Enabling a radio tag:
LED indicator will light red after entering the programming level. The system will
wait for action. Press VALET button once to enable radio tag. The system will confirm
enabling with one short sound signal of a siren and a green LED light. After that the
system will return to the programming menu.
Press
and hold
for 1 sec.