Panduit Atlona AT-HDVS-CAM-HDBT-BK User manual

Installation Guide
AT-HDVS-CAM-HDBT-BK and AT-HDVS-CAM-HDBT-WH
1
PTZ Camera with HDBaseT Output
AT-HDVS-CAM-HDBT-BK and AT-HDVS-CAM-HDBT-WH
The Atlona AT-HDVS-CAM-HDBT is an enterprise-grade PTZ camera designed for use in
video conferencing and other applications such as lecture capture and distance education. It
features an HDBaseT output for extending video, power, and camera control over distances up
to 330 feet (100 meters). The HDVS-CAM-HDBT is ideal for remotely interfacing into HDBaseT
equipped switchers and extenders, for use with a video conferencing codec, lecture capture
appliance, or PC equipped for video capture. Camera control over HDBaseT or TCP/IP facilitates
remote integration into AV control systems. The HDVS-CAM-HDBT delivers high performance,
professional-quality imaging with video resolutions up to 1080p @ 60 Hz, as well as fast and
accurate auto-focusing, and a fast yet quiet pan and tilt mechanism. This PTZ camera is ideal for
large meeting spaces, classrooms, training rooms, and many other environments. The HDVS-
CAM-HDBT is available in black or white.
1 x AT-HDVS-CAM-HDBT-BK or
AT-HDVS-CAM-HDBT-WH
1 x Wall mounting plate
1 x 1/4 20OUNC screws
1 x IR Remote Control
1 x USB A cable
1 x VISCA to RS-232 DB-9 adapter
2 x AAA battery
1 x Installation Guide
Package Contents

Installation Guide
AT-HDVS-CAM-HDBT-BK and AT-HDVS-CAM-HDBT-WH
2
1 RS-232
Connect included VISCA to RS-232
adapter here to control the camera with a
third party software or hardware controller.
2 AUDIO IN
Port not used.
3 HDBaseT OUT
Connect to a compatible PoE switcher
or receiver, such as: AT-OME-RX11, AT-
OME-PS62, etc.
4 LAN
Connect to a network switch to control
the unit via TCP/IP or webGUI.
5 DC 12V
Connect the included 12V power supply
to this port.
Panel Descriptions
1
0
X
Z
o
o
m
F
1
.
6
-
F
3
.
0
f
4
.
7
m
m
-
f
4
7
m
m
1
0
X
Z
o
o
m
F
1
.
6
-
F
3
.
0
f
4
.
7
m
m
-
f
4
7
m
m
RS-232 AUDIO
IN
LANHDBaseT OUT
DC 12V
AT-HDVS-CAM-HDBT-BK
21 3 54
Mounting Instructions
The HDVS-CAM-HDBT has two installation options, wall mount (included) and ceiling mount
(purchased separately).
Wall Mount installation
To install the HDVS-CAM-HDBT, 4 M6 swelling bolts, 1 1/4 20UNC bolt, 4 M6 nuts & shims, the
included wall mount bracket, and the HDVS-CAM-HDBT are needed.
1 Install the M6 swelling bolts in a rectangular pattern on the wall, 100 mm wide and 50 mm
high.
2 Attached the wall mount bracket onto the wall, by placing them on the M6 swelling bolts
and securing it with the M6 nuts and shims.
3 Once the wall mount bracket is secure on the wall, place the camera on the top of the wall
mount bracket and secure it with the 1/4 20UNC bolt.

Installation Guide
AT-HDVS-CAM-HDBT-BK and AT-HDVS-CAM-HDBT-WH
3
Ceiling Mount installation
To install the HDVS-CAM-HDBT, 4 PA3X30 self-tapping screws, 4 PM3X6 screws, 4 screw
stoppers, 1 1/4 20UNC screw, the optional ceiling upper and lower covering plates, and the
HDVS-CAM-HDBT are needed.
1 Install the 4 screw stoppers in the ceiling.
2 Connect the upper ceiling covering plate to the screw stoppers using the PA3X30 self-
tapping screws.
3 Connect the lower ceiling covering plate to the bottom of the HDVS-CAM-HDBT using the
1/4 20UNC screw.
4 Mount the lower ceiling covering plate to the upper ceiling plate using 3 PM3X6 bolts.
ON KE
1 2
ON KE
1 2
1
0
X
Z
o
o
m
F
1
.
6
-
F
3
.
0
f
4
.
7
m
m
-
f
4
7
m
m
1
0
X
Z
o
o
m
F
1
.
6
-
F
3
.
0
-
f
4
7
m
m
1
0
X
Z
o
o
m
F
1
.
6
-
F
3
.
0
f
4
.
7
m
m
-
f
4
7
m
m
1
0
X
Z
o
o
m
F
1
.
6
-
F
3
.
0
-
f
4
7
m
m
NOTE: The camera picture will need to be
inverted for video to be viewed correctly. View
the HDVS-CAM-HDBT manual for instructions on
how to invert video.

Installation Guide
AT-HDVS-CAM-HDBT-BK and AT-HDVS-CAM-HDBT-WH
4
1 *Optional* Connect the Ethernet cable to the LAN port on the back of the HDVS-CAM.
2 Connect a compatible PoE HDBaseT switcher or receiver (e.g. AT-OME-RX11, AT-OME-
PS62, etc) to this port.
3 *Optional* Connect the Visca to RS-232 cable to the Visca port for RS-232 control.
4 *Optional* If a PoE device is unavailable, connect the DC 12V power cable to the unit.
Installation
GND
RXD
CTS
TXD
RI
DSR
DSR
RTS
DCD
NC
TXD
DSR
DTR
GND
IR OUT
GND
RXD
Visca Visca
RS-232 RS-232
DTR
DSR
TXD
GND
RXD
GND
IR OUT
NC
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
RI
Refer to the tables below for recommended cabling when using Altona products with HDBaseT.
The green bars indicate the signal quality when using each type of cable. Higher-quality signals
are represented by more bars.
Cable Recommendation Guidelines
Core Shielding CAT5e CAT6 CAT6a CAT7
Solid UTP (unshielded) N/A
STP (shielded)
Performance Rating (MHz) 350 500 600 800
Use of a TIA/EIA 568B termination is
recommended for optimal performance.
Cable Max. Distance @ 1080p
CAT5e / 6 / 6a / 7 330 feet (100 meters)
IMPORTANT: Stranded or patch cables are not recommended due to
performance issues.

Installation Guide
AT-HDVS-CAM-HDBT-BK and AT-HDVS-CAM-HDBT-WH
5
WebGUI
The HDVS-CAM-HDBT includes a built-in webGUI, which allows easy management and control
of all features if not using the on-screen OSD and remote. Follow the instructions below to
access the webGUI.
1 Use an IP scanner to determine the IP address of the HDVS-CAM-HDBT.
2 Launch a web browser and enter the IP address of the unit.
3 The HDVS-CAM-HDBT Login page will be displayed.
4 Enter the following information on the Login page.
Login: root
Password: Atlona
5 Click the Login button.

Installation Guide
AT-HDVS-CAM-HDBT-BK and AT-HDVS-CAM-HDBT-WH
6
IR Remote
HOME
SET
F1 F2 F3 F4
1
AUTO
MANUAL
FOCUS ZOOM
2 3
123
456
789
*8 #
+
_ _
+
4
CAMERA SELECT
SET
PRESET
CLEAR
PRESET
BLC
ON/OFF MENU
The AT-HDVS-CAM comes with an IR remote control for full control of the camera and use of the
OSD menu. See the user manual for full information on the remote buttons, OSD, and presets.

Installation Guide
AT-HDVS-CAM-HDBT-BK and AT-HDVS-CAM-HDBT-WH
7
Troubleshooting
Problem Cause Solution
Why Can I not get any
picture from my camera?
Camera lens is covered,
category cable is faulty,
or the PC is not set up to
receive the video feed from
the camera.
• Remove the camera lens
cover from the unit.
• Try switching out the
category cable for a new
one.
• Check the device manager of
the PC to ensure the camera
USB device is discovering
correctly. If the device is
discovered, ensure the
camera is selected within the
video recording program (e.g.
Skype).
Why isn’t my video showing
correctly?
Resolution, focus, color,
and/or refresh rate may be
set incorrectly.
• Use the one of the control
interfaces (IR, RS-232,
or webGUI) to adjust the
resolution, focus the camera,
switch between 50 and 60
Hz, and many other settings.
Why is my IR remote not
working?
There is no power or too
much sunlight.
• Ensure there are fresh
batteries in the IR remote
control.
• Move the camera, so the
front panel IR window is out
of direct light.

Installation Guide
AT-HDVS-CAM-HDBT-BK and AT-HDVS-CAM-HDBT-WH
8
Version 1
© 2020 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered
trademarks are the property of their respective owners. Pricing, specications and availability subject to change without notice. Actual products, product images,
and online product images may vary from images shown here.
Toll free US International
atlona.com •877.536.3976 •41.43.508.4321