Paradyne Hotwire 6210 Original operating instructions

6210 Bridge and 6211 Bridge/Router
Quick Installation Instructions
Document Number 6210-A2-GZ13-00
January 2005
If you connected the USB port of the modem to your PC, the Found New Hardware Wizard appears on your
computer screen. Insert the supplied CD in your CD drive and install the USB drivers on it as directed by the Wizard.
See the user’s guide on the CD for important safety instructions and more information.
.
*6210-A2-GZ13-00*
04-17517
LINE LAN POWERPHONE USB
OR
1
2
3
4
DEFAULT
RESET
Connect the LINE
port of the modem
to your DSL ine
using the
supp ied
phone
cord.
Connect either:
The LAN port of the modem to a
10/100BaseT Ethernet network
interface card on your PC, or to
hub or switch in your network. An
Ethernet cab e is supp ied with your
modem.
or
The USB port of the modem to a
free USB port on your PC.
Connect the POWER
receptac e to the
power supp y and p ug
the power supp y into
a wa out et.
Connect the TELEPHONE
port of the modem to
your te ephone
using the cord
that came with
your te ephone.
Copyright ©2005 Paradyne Corporation.