USING YOUR ELECTRIC KETTLE
· Before use, make sure the power cord, the base and the body are all dry.
· When filling the kettle, always remove it from the base.
· Pay attention to the escaping steam to avoid scalding.
· Always unplug the kettle from the socket and allow it to cool completely
before cleaning or descaling it.
· DO NOT immerse the kettle, its power cable, and socket or base
into water to avoid hazards.
Keep warm temp: 120℉/160℉/175℉/185℉/195℉. The kettle will auto
shut-off after 40-minute warm-keeping.
Before First Use
1. Rinse and dry the lid thoroughly.
2. Fill kettle to the maximum level mark with fresh tap water and boil water for
several times to deodorize.
Additional Features
Keep Warm Function
· Keep warm function will be activated automatically after the heating cycle.
· If the kettle is removed from the base, replace the kettle and hold until a
beep is heard to activate this function manually. The keep warm temperature
level is auto-selected depending on the actual water temperature.
Boil-Dry Protection
In the event that the kettle boils dry, it is protected by a boil dry fail-safe mechanism. It will
switch the kettle off automatically when sensing a boil dry situation and keep it switched
off until the kettle is refilled with at least the minimum amount of water. Always allow the
kettle to cool for at least 10 minutes before reuse if the kettle has boiled dry.
Operation
1. Reomve the lid, and fill the kettle with water, making sure that the water
level is between the minimum and maximum marks.
2. Align the triangle marks（ ）to replace the lid. Place the kettle
back on the base and plug into an electrical outlet.
4. Once completed, three beeps will be heard, with the current water
temperature shown on the display.
3. ① To boil water, tap directly.
② To set a desired temperature, tap repeatedly to cycle through
212℉-120℉-160℉-175℉-185℉-195℉. The kettle will start to heat water
to the desired temperature after the display flashes three times.
CLEANING AND MAINTENANCE
· Wipe the outer body with a
soft dry cloth.
· Regularly remove water scale
deposits from inside the kettle
based on how frequently the
kettle is used.
· In case of scale buildup, fill the
kettle with vinegar or lemon
juice, add water and set aside
for at least one hour. Pour the
mixed liquid away, fill the
kettle with clean water to the
maximum line, boil and get rid
of the water. Repeat several
times until all the vinegar odor
is flushed away.
WARRANTY
Thanks for choosing Paris Rhône Electric Kettle.
This product is covered with Paris Rhône product and labor warranty
for 12 months from the date of its original purchase.
The warranty will not apply in cases of:
- Accident, misuse, or repairs performed by unauthorized personnel.
- Any unit that has been tampered with or used for commercial purpose.
- Normal wear and tear of wearable parts.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the User Manual, e.g. connection
to an unsuitable mains supply or non-compliance with the instructions.
- Partially or completely dismantled appliances.
- Defects caused by or resulting from damages from shipping or from
repairs, service, or alteration to the product or any of its parts that have
been performed by a repair person not authorized by Paris Rhône.
We can only provide after-sales service for products that are sold by
Paris Rhône or Paris Rhône authorized retailers and distributors. If you
have purchased your unit from a different place, please contact your
seller for return and warranty issues.
※Please have your invoice and order ID ready before contacting
Customer Support.
Manufacturer: Shenzhen NearbyExpress Technology
Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II,
Shenzhen, China
www.parisrhone.co
Made In China
Rev_1.0_EN
Intertek
3061511
CM
MAX
MIN
