Parish Spinner 8903 User manual
1
Instructions for
8903, 8904, and 8908 Spinner®
Model #
Serial #
Form # ADP-SPIN
3-17
8904 - T-Handle8903 - Wand Handle
8908 - Counter Spinner®
Please read before use.
Register your product
at: http://www.mytee.
com/support/register/
2
Dear Customer:
Congratulations on the purchase of your new Spinner®. As you are already
aware, the scene of the equipment world is becoming more high tech, and we
at Mytee Products Inc. strive to keep you on the cutting edge with superior quality
and technology.
Keep in mind that the Spinner® is a machine, so neglect or abuse will cause
unnecessary damage and void the warranty. However with simple maintenance
the Spinner®will give quality performance for many years to come.
If warranty questions arise, please consult your user manual or get in touch with
your distributor. If you have questions about maintenance, replacing parts or
ordering parts, please call an authorized Mytee Products Inc. Service Center.
To see an updated list, visit our website at www.mytee.com
Before you begin cleaning, please read your manual thoroughly.
Sincerely,
Mytee Customer Care Dept.
Parts and Service
Repairs, when required, should be performed by Mytee service personnel or Mytee
authorized Service Center using Mytee original replacement parts and accessories.
Call Mytee for repair parts or service. Please specify the Model and Serial Number
when discussing your machine.
Name Plate
The Model and Serial Number of your machine are shown on the Nameplate on the
back panel of the machine. This information is needed when ordering repair parts
for the machine. Use the space provided on the front cover to note the Model and
Serial Number of your machine for future reference.
Unpacking the Machine
When the machine is delivered, carefully inspect the shipping carton and the
machine for damage. If damage is evident, save the shipping carton so that it can
EHLQVSHFWHGE\WKHFDUULHUWKDWGHOLYHUHGLW&RQWDFWWKHFDUULHULPPHGLDWHO\WRÀOHD
freight damage claim.
Caution and Warnings
Symbols
Mytee uses the symbols below to signal potentially dangerous conditions. Always
read this information carefully and take the necessary steps to protect personnel
and property.
Is used to warn of immediate hazards that will cause severe personal injury or death.
Is used to call attention to a situation that could cause severe personal injury.
Is used to call attention to a situation that could cause minor personal injury or
damage to the machine or other property. When using an electrical appliance, basic
precautions should always be followed, including the following: Read all instructions
before using this machine. This product is intended for commercial use only.
7RUHGXFHWKHULVNRIÀUHHOHFWULFDOVKRFNRULQMXU\
1. Read all instructions before using equipment.
8VHRQO\DVGHVFULEHGLQWKLVPDQXDO8VHRQO\PDQXIDFWXUHU·VUHFRPPHQGHG
attachments.
3. Always unplug or disconnect the appliance from power supply when not in use.
4. Do not allow to be used as a toy. Close attention is necessary when used by or
near children.
'RQRWXVHLQDUHDVZKHUHÁDPPDEOHRUFRPEXVWLEOHPDWHULDOPD\EHSUHVHQW
6. Do not leave the unit exposed to harsh weather elements. Temperatures below
freezing may damage components and void warranty.
7. Use only the appropriate handles to move and lift unit. Do not use any other parts
of this machine for this purpose.
.HHSKDLUORRVHFORWKLQJÀQJHUVDQGDOOSDUWVRIWKHERG\DZD\IURPDOO
openings and moving parts.
9. Use extra care when cleaning on stairs.
10. When cleaning and servicing the machine, local or national regulations may apply
to the safe disposal of liquids which may contain: chemicals, grease, oil, acid, alka-
lines, or other dangerous liquids.
11. Do not leave operating unattended.
8VHRQO\QRQÁDPPDEOHOLTXLGLQWKLVPDFKLQH
Preparation
1. Remove furniture from cleaning area, and sweep or vacuum.
2. Protect cabinets, carpets, walls and painted surfaces from spray with drop cloths
or plastic.
,GHQWLÀFDWLRQ²,GHQWLI\WKHW\SHRIÁRRU\RXDUHJRLQJWRFOHDQ7KLVVWHSLVYLWDO
VLQFHHDFKÁRRULQJW\SHPD\FDOOIRUGLIIHUHQWFKHPLFDOVEUXVKHVDQGHTXLSPHQW
%DVLFÁRRULQJW\SHVDUHUHVLOLHQWYLQ\O9&7OLQROHXPZKLFKLVJHQHUDOO\VRIWHU
VWRQHWHUUD]]RTXDUU\FHUDPLFEULFNFRQFUHWHPDGHRIQDWXUDOPDWHULDOVDQG
VWRQHVXEVWLWXWHPDUEOHVODWHDQGJUDQLWHZKLFKPLPLFVVWRQH
$SSOLFDWLRQ²2QFHWKHÁRRULQJLVLGHQWLÀHGDSSO\WKHDSSURSULDWHW\SHRIFOHDQLQJ
RULQWKHFDVHRIUHVLOLHQWÁRRULQJVWULSSLQJFKHPLFDO2QWLOHVXUIDFHVVSUD\FKHPL-
cal evenly over tile and grout lines, allowing it to pool in the lines.
(PXOVLÀFDWLRQ²&KHPLFDOVW\SLFDOO\UHTXLUHGZHOOWLPHWRUHPRYHWKHGLUWDQG
JULPHGULYHQLQWRWKHVXUIDFH7KHGLUWLHUWKHÁRRUWKHORQJHUWKHFKHPLFDOVPD\QHHG
to dwell. Without proper dwell time, chemicals will not be effective.
$JLWDWLRQDQG(OLPLQDWLRQ²$JLWDWHWKHFKHPLFDOLQWRWKHÁRRUWRIDFLOLWDWHFOHDQLQJ
XVLQJD6SLQQHUÁRRUPDFKLQHFRQQHFWHGWRDQH[WUDFWRU7KH6SLQQHUOD\VGRZQ
high-pressure spray to agitate and rinse, and vacuums up the solution simultane-
ously, eliminating it from the surface.
Spinner®Operation
$WWDFKWKH9DFXXPDQG6ROXWLRQ+RVHVWRWKHH[WUDFWRU
$WWDFKWKH6ROXWLRQ+RVHWRWKH0DOH4XLFN'LVFRQQHFWDQGWKH9DFXXP+RVHWR
the Wand Tube.
3. Turn on the extractor to engage the vacuum, while making sure the bottom of the
6SLQQHULVÁXVKZLWKWKHFOHDQLQJVXUIDFHWRHQVXUHSURSHUVXFWLRQ
6TXHH]HWKH6SLQQHU·VKLJKSUHVVXUHWULJJHUJXQWRGLVSHQVHVROXWLRQRQWR
the surface.
5. Hold the machine at waist level and use a back-and-forth motion.
After Use
1. Unplug.
2. Inspect hoses and replaced if damaged.
$IWHUHDFKXVHZLSHÁRRUPDFKLQHZLWKDFOHDQVRIWGDPSFORWK
4. Do not expose to rain.
5. Store indoors. In a clean, dry place.
6. Do not store sitting on brush.
Maintenance Schedule
Maintenance item Daily 2QFHDZHHN
Clean and inspect hoses
Check for loose hardware
Clean machine with clean, soft damp cloth
Inspect spray jets once a week.
Use Mytee®System Maintainer 3601 every 100
hours. Circulate through the hose and tool.
x
x
x
x
x
3URGXFW6SHFLÀFDWLRQV
Spinner® Style 8903
1.5” Wand Style
8904
1.5”
T-Handle
8908
Counter Spinner
Tube Construction Stainless steel µ9DFXXP
Hose
Cleaning Path 12” 7.5”
PSI Requirements 500 - 3,000 PSI
Spray Jets Dual 1502
Product Weight 18 lbs. 16 lbs. 7 lbs.
Product
Dimensions 12” x 14” x 52” 16” x 19” x 49” 11” x 9” x 9”
GENERAL INFORMATION
3
FAQs
Q – How much PSI do I need to operate the Spinner®?
$²6SLQQHUV®require between 500 and 3,000 PSI.
Troubleshooting
The Spinner®is not spinning.
1. Inspect the jets to make sure they are not clogged.
&KHFNWKHPDFKLQHIRUDQRUPDOÁRZRIVROXWLRQE\GLVFRQQHFWLQJWKH6ROXWLRQ
Hose from the Spinner®and letting the liquid run freely.
,IWKHVROXWLRQ·VÁRZLVGLVUXSWHGXVH0\WHH®System Maintainer 3601.
4. Try to spin the unit by hand. If it does not move, replace the swivel. If it moves, the
seal may need rebuilding. Take the Spinner®to your local service center.
Guidelines
)RUHDVHRIXVHNHHSWKHEUXVKDQGPDQLIROGEDODQFHGDQGÁDW
$GMXVWWKHKDQGOHDWDFRPIRUWDEOHKHLJKWIRUWKHRSHUDWRUPDNLQJVXUHWKHEUXVK
remains balanced before starting the extractor.
3. The Spinner®operates differently according to the surface. Smooth surfaces offer
more resistance than surfaces such as tile and grout. If you experience resistance of
PRYHPHQWDGMXVWWKHYDFXXPUHOHDVHVORWWRUHOHDVHDLUIURPWKH9DFXXP+RVH
Replacement Parts
8903, and 8904
%UXVK*OLGH.LW²1R$
*OLGH²1R3
%UXVK²1R*
6ZLYHO²1R+
5HEXLOG.LW²1R+
8908
*OLGH²1R3
%UXVK²1R*
6ZLYHO²1R+
5HEXLOG.LW²1R+
GENERAL INFORMATION
4
9$&880+26($1'62/87,21+26($77$&+0(17
USE
Hold the machine at waist level and use a back-and-forth motion.
8903 WAND HANDLE, 1.5” TUBE SPINNER®
JETS
After the extractor is turned on and vacuum is engaged,
VTXHH]HWKH+LJK3UHVVXUH7ULJJHU*XQ/LTXLGÁRZVWKURXJK
the Solution Hose and activates the Spinner Bar.
)5217
1. Quick disconnect
2. High-pressure gun
9DFXXPKRVHFRQQHFWLRQ
9DFUHOLHI
2
1
4
7
8
6
3
5
5. Wand grip handle
6. Hi-pressure solution hose
7. 12” Spinner® head
8. Nylon glide with remove-
able brush
$IWHUWKH9DFXXP+RVHDQG6ROXWLRQ+RVHDUHDWWDFKHGWRWKH
extractor, connect the Solution Hose to the Male Quick Discon-
QHFWDQGWKH9DFXXP+RVHWRZDQGWXEH Use the included
adapter if you are using a 2” vacuum hose. You can permanently
attach the adapter using silicone or similar adhesive.
Attach solution line
here.
Attach vacuum hose
here.
Adapter for use with 2”
vacuum hoses.
5
8903 WAND HANDLE, 1.5” TUBE SPINNER®
Part prices are subject to change.
,7(061276+2:1
,7(0
12
3$5712
'(6&5,37,21
47<
0653
+$
MHWVV
HD
+
EDUWVWUDLJKWGHJ
HD
*
EUXVKVSLQQHUULQJ
HD
3
VSLQQHUULQJQ\ORQ
HD
3$
PDQLIROGVSLQQHUORZSURILOH
HD
+
VFUHZ[SKLOSDQKHDGVV HD
+
VZLYHOVSLQQHU
HD
+
:DVKHUIODWVV
HD
+$
PRXQWLQJSODWHVSLQQHU
HD
+
VFUHZ[SKLOSDQKHDGW\SHDVV
HD
%
HOERZEUDVVGHJPSW[PSW HD
+
VHWEROWORFNQXWVZDVKHUV
HD
+
\RNHVSLQQHU
HD
$+
VROKRVH[IVZ[PSW
HD
+
KDQGOHORZHUZDQGVW\OHVSLQQHU
HD
+
ZDVKHUIODWVV
HD
+
EROW[
HD
+
JULSGLDZDQG HD
%
GHJVWUHHWHOERZEUDVVPDOH
HD
+
QXWORFNWKLQSDWWHUQ
HD
+
JXQKLJKSUHVVXUH
HD
%
EXVKLQJEUDVVPSW[ HD
%
QLSSOHEUDVVPKH[
HD
%
ILOWHULQOLQHPHVK037[)37
HD
%
TGEUDVVP
HD
+ VFUHZ[SSDQ
HD
3
LQOHW
HD
*
FDSYDFXXPUHOLHIVORWVSLQ
HD
+$
JXQVW\OHYDOYHFODPS
HD
+
EROW[KH[KHDGVV HD
+
ZDVKHUQDUURZ
HD
+
WXEHVSLQQHUZDQGVW\OH
HD
+$
FODPSVSLQQHUKDQGOH[
HD
+
QXWORFNQ\ORQLQVHUWVV
HD
+
FXIIWKUHDG[VOLS
HD
3+
KRVHYDFZLUHUHLQIRUFHG
IW
+
FODPSKRVHGLD
HD
3$5712
'(6&5,37,21
47<
0653
*
JDVNHWFRUN;´WKLFN
HD
'
&
%
$
%
&
'
(
)
(
)
6+((72)
6SLQQHU
:DQG6W\OH
(
6&$/(
5(9
':*12
&
6,=(
7,7/(
1$0(
'$7(
&+(&.('
'5$:1
35235,(7$5<$1'&21),'(17,$/
$
'2127
6&$/('5$:,1*
0<7((
352'8&76,1&
0/D%DUEHUD
7+(,1)250$7,21&217$,1(',17+,6
'5$:,1*,67+(62/(3523(57<2)
0<7((352'8&76,1&$1<
5(352'8&7,21,13$5725$6$:+2/(
:,7+2877+(:5,77(13(50,66,212)
0<7((352'8&76,1&,6
352+,%,7('
6
9$&880+26($1'62/87,21+26($77$&+0(17
USE
)5217
2
1
3
67
4
5
8904 “T” HANDLE, 1.5” TUBE SPINNER®
Hold the machine at waist level and use side to side.
JETS
After the extractor is turned on and vacuum is engaged,
VTXHH]HWKH+LJK3UHVVXUH7ULJJHU*XQ/LTXLGÁRZVWKURXJK
the Solution Hose and activates the Spinner Bar.
1. Quick disconnect
2. High-pressure gun
9DFXXPKRVHFRQQHFWLRQ
9DFUHOLHI
5. Hi-pressure solution hose
6. 12” Spinner® head
7. Nylon glide with remove-
able brush
$IWHUWKH9DFXXP+RVHDQG6ROXWLRQ+RVHDUHDWWDFKHGWRWKH
extractor, connect the Solution Hose to the Male Quick Discon-
QHFWDQGWKH9DFXXP+RVHWRZDQGWXEH8VHWKHLQFOXGHG
adapter if you are using a 2” vacuum hose. You can permanently
attach the adapter using silicone or similar adhesive.
Attach solution line
here.
Attach vacuum hose
here.
Adapter for use with 2”
vacuum hoses.
7
8904 “T” HANDLE, 1.5” TUBE SPINNER®
Part prices are subject to change.
,7(061276+2:1
,7(0
12
3$5712
'(6&5,37,21
47<
0653
+$
MHWVV
HD
+
EDUWVWUDLJKWGHJ
HD
*
EUXVKVSLQQHUULQJ
HD
3
VSLQQHUULQJQ\ORQ
HD
3$
PDQLIROGVSLQQHUORZSURILOH
HD
+
VFUHZ[SKLOSDQKHDGVV
HD
+
VZLYHOVSLQQHU
HD
+
ZDVKHUIODWVV
HD
+$
PRXQWLQJSODWHVSLQQHU
HD
+
VFUHZ[SKLOSDQKHDGW\SHDVV
HD
%
HOERZEUDVVGHJPSW[PSW
HD
+
VHWEROWORFNQXWVZDVKHUV
HD
+
\RNHVSLQQHU
HD
+$
FODPSVSLQQHUKDQGOH[
HD
+
WXEHYDFHOERZGLDVSLQQHU
HD
$+
VROKRVHEODFN2$/IVZ[P
HD
3
LQOHW
HD
*
FDSYDFXXPUHOLHIVORWVSLQ
HD
%
TGEUDVVP
HD
%
ILOWHULQOLQHPHVKPSW[ISW
HD
%
QLSSOHEUDVVPKH[
HD
%$
VZLYHOKLJKSUHVVXUHVWDLQOHVVVWHHO
HD
%
EXVKLQJEUDVVPSW[
HD
3
WULJJHUVSLQQHU
HD
%
YDOYHKLJKSUHVVXUHVSLQQHU
HD
3
KDQGOHEDFNKDOIVSLQQHU
HD
+
VFUHZ[SKLOSDQVV
HD
3
KDQGOHIURQWKDOIVSLQQHU
HD
+
KDQGOH7VSLQQHU
HD
+
EROW[KH[KHDGVV
HD
+
ZDVKHUIODWVV
HD
+
QXWORFNQ\ORQLQVHUWVV
HD
+
FXIIWKUHDG[VOLS
HD
3+
YDFKRVHZLUHUHLQIRUFHG
IW
+
FODPSKRVHGLD
HD
3$5712
'(6&5,37,21
47<
0653
*
JDVNHWFRUN;´WKLFN
HD
'
&
%
$
%
&
'
(
)
(
)
6+((72)
6SLQQHU
76W\OH
&
6&$/(
5(9
':*12
&
6,=(
7,7/(
1$0(
'$7(
&+(&.('
'5$:1
35235,(7$5<$1'&21),'(17,$/
$
'2127
6&$/('5$:,1*
0<7((
352'8&76,1&
0/D%DUEHUD
7+(,1)250$7,21&217$,1(',17+,6
'5$:,1*,67+(62/(3523(57<2)
0<7((352'8&76,1&$1<
5(352'8&7,21,13$5725$6$:+2/(
:,7+2877+(:5,77(13(50,66,212)
0<7((352'8&76,1&,6
352+,%,7('
8
9$&880+26($1'62/87,21+26($77$&+0(17
USE
Use unit on counter top or other hard surface.
)5217
1. Male quick disconnect
2. Solution hose
3. High-pressure trigger gun
4. Nylon glide
JETS
After the extractor is turned on and vacuum is engaged,
VTXHH]HWKH+LJK3UHVVXUH7ULJJHU*XQ/LTXLGÁRZVWKURXJK
the Solution Hose and activates the Spinner Bar.
1
3
2
5
4
7
6
8908 COUNTER SPINNER®
Connect solution
hose here.
Connect vacuum
hose here.
5. 6” Spinner® head
9DFXXPKRVH
9DFXXPKRVHFRQQHFWLRQ
port
$IWHUWKH9DFXXP+RVHDQG6ROXWLRQ+RVHDUHDWWDFKHGWRWKH
extractor, connect the Solution Hose to the Male Quick Discon-
QHFWDQGWKH9DFXXP+RVHWRZDQGWXEH
9
8908 COUNTER SPINNER®
Part prices are subject to change.
,7(061276+2:1
,7(0
12
3$5712
'(6&5,37,21
47<
0653
+$
MHWVV
HD
+
VSUD\EDU
HD
*
EUXVKFRUQHUVSLQQHU
HD
3
JOLGHQ\ORQFRUQHUVSLQQHU
HD
3
PDQLIROGFRXQWHUWRRO
HD
+
VFUHZ[SKLOSDQKHDGVV HD
+
VZLYHOVSLQQHU
HD
+
ZDVKHUIODWVV
HD
+
FDVWLQJFRXQWHUVSLQQHU
HD
% QLSSOHEUDVVPKH[
HD
%
GHJVWUHHWHOERZEUDVVPDOH
HD
+
JXQKLJKSUHVVXUH
HD
%
EXVKLQJEUDVVPSW[ HD
$+
VROKRVH[2$/P
HD
%
ILOWHULQOLQHPHVK037[)37
HD
%
TGEUDVVP
HD
+
FRXSOHUEDUEWREDUEILWWLQJ
HD
+
FXIIKRVH[ZLUH
HD
+
YDFKRVH[VZFX
HD
3$5712
'(6&5,37,21
47<
0653
* KRVHZUDSKHDWJXDUG
HD
'
&
%
$
%
&
'
(
)
(
)
6+((72)
6SLQQHU&RXQWHU
%
6&$/(
5(9
':*12
&
6,=(
7,7/(
1$0(
'$7(
&+(&.('
'5$:1
35235,(7$5<$1'&21),'(17,$/
$
'2127
6&$/('5$:,1*
0<7((
352'8&76,1&
0/D%DUEHUD
7+(,1)250$7,21&217$,1(',17+,6
'5$:,1*,67+(62/(3523(57<2)
0<7((352'8&76,1&$1<
5(352'8&7,21,13$5725$6$:+2/(
:,7+2877+(:5,77(13(50,66,212)
0<7((352'8&76,1&,6
352+,%,7('
This manual suits for next models
2
Table of contents
